WARNING/AVERTISSEMENRisk of Fire. Do not install insulation within 3 inches (76 mm) of luminaire top.Risques d’incendie. Ne pas installer d’isolation à moins de 76 mm (3 pouces)au-dessus du luminaire.

CAUTIONDo not perforate the integrity of the luminaire. Only screw into the threaded mounting bracket holes located at the four corners of the fixture.

Environmental Operating Temperature RangeEnvironmental RatingEnvironmental Storage Temperature Range

-10°C to +40°CDry location rated-40°C to +60°C

Refer to TLP Series LED Panel Specification for more lamp electronical data info.

Storage Info

www.sgslight.com | sales@sgslight.com

SUSPENDEDFor TLP-X/F/M/A/E Series

INSTALLATION STEPS

Items3030 3060 6060 6262 3012 6012

X 2 X 3X 2 X 3X 4 X 6X 2 X 3X 2 X 3

wire A

wire B

Unscrew the highlighted screws from the four corners of the LED Panel.

Insert the wall plugs into the ceiling and secure the suspended surface fixture to the ceiling.

1 2

Screw the suspended panel fixture to the LED Panel.3 Screw the suspended cable to the LED Panel.4

www.sgslight.com | sales@sgslight.com

SUSPENDED KITS

TLP-FDJ2 TLP-FDJ3

Adjust the length of the suspended cable to the desired length.

5 Screw the suspended cable to the ceiling fixture.6

Distance

3030: 370mm3060: 370mm6060: 280mm

Distance

6262: 180mm3012: 370mm6012: 280mm

30120/60120

Please note the recommended distances for the ceiling fixtures.7

Fix the LED Panel to the ceiling and make final adjustments for desired height and angle.

8 Connect the LED Driver to AC mains power.9

3030: A: 222mm3060: 520mmA:

6060: 520mmA:6262: A: 505mm

3012: A: 425+B: 425mmA: 425+B: 425mm6012:

73012/6012

3012/6012

www.sgslight.com | sales@sgslight.com