1upload.olivettifrance.fr/Machine Couleur/Copieur Couleur... · Web viewWrong Messages in Wireless...

Program Release InformationCSES ID-No. DLBT1406442ENModel: bizhub C554e/C454eMFP firmware Ver.G20-E4Subject: bizhub C554e/C454e Mass-Production Program Maintenance Release1 Function Version5 (Ver.G20-E4)(for Web

Browser (LK-101v3))2014/05/01

1. Release version and download file name

The newly released program version and download file name is as follows.

[Release version]

<C554e/C454e MFP firmware>

Model Program Name Current Ver. New Ver. Program File Name

bizhub C554e/C454e

MFP firmware G20-C8 G20-E4 A5C10Y0-F000-G20-E4.exe

*This firmware can use for Multi-Language. (Multi-Language firmware is the same as this firmware.)

<C554e/C454e Voice Data>

Model Program Name Current Ver. New Ver. Program File Name

bizhub

C554e/C454e

Voice Data 50 51 A5C10Y0-C100-G00-

51_Voice(Function_Version5_MR1).exe

[Download File Name]

A5C10Y0-F000-G20-E4.exe

A5C10Y0-C100-G00-51_Voice(Function_Version5_MR1).exe

C554e_Series_PRI_DLBT1406442EN_0.doc

2. What changed

2.1. Release of bizhub C554e/C454e (Maintenance Release Program Function Version5 Ver.G20-E4)

The individual files and the checksum are as follows.

Program Name File Name Checksum Note

MFP Card Version A5C10Y0-F000-G20-E4

MFP Controller BOOT Program A5C10Y0-1E00-G00-04 7CD6

Linux-based MFP Controller Linux-2.6.26.8-rt16 C341

MFP Controller Kernel Program A5C10Y0-1C00-G00-51 235C

MFP Controller Subset A5C10Y0-1F00-G00-G0 CE3C

MFP Controller A5C10Y0-0100-G20-E4 96DB

MFP Controller System A5C10Y0-1000-G20-E4

MFP Controller Print Controller A5C10Y0-3000-G00-W2

MFP Controller Print Controller Font A5C10Y0-3F00-G00-W0

MFP Controller Print Controller Demo Page A5C10Y0-3E00-G00-61

MFP Controller MIO A5C10Y0-5000-G00-E1

Konica Minolta Confidential 1/22


Browser (LK-101v3))2014/05/01

MFP Controller PIC A5C10Y0-8200-G00-91

MFP Controller Thread Image Parameter A5C10Y0-8B00-G00-01 040C

MFP Controller PIC Image Parameter A5C10Y0-8A00-G00-01 046B

Scanner A5C10Y0-0023-G00-30 BAA2

Printer (C554e) A5AY0Y0-0050-G00-25 A22A

Printer (C454e) A5C00Y0-0050-G00-25 0BB5

FAX board controller A22M0Y0-4000-G00-08 0CC9

Operation panel message data A5C10Y0-8100-G00-E4 616F

ADF (DF-701) A3CE0Y0-0024-G00-10 EDE1

Finisher (FS-533) A2YU0Y0-0071-G00-08 C3B1

Finisher (FS-534) A3EP0Y0-0071-G00-18 7F24

Finisher (FS-535) A2Y10Y0-00N1-G00-25 4916

Finisher (JS-506) A2YV0Y0-0070-G00-01 B1E3

SD A3ER0Y0-0071-G00-08 D58E

RU A2Y10Y0-00R1-G00-07 6900

ZU A1090Y0-00H1-G01-12 C49E

COPY PROTECT --- D805

Movie Data A5C10Y0-C000-G00-30

Voice Data A5C10Y0-C100-G00-51

Panel Sound Data A5C10Y0-C200-G00-00 40E1

Dictionary Data A5C10Y0-B100-G00-00

Engine Parameter (C554e) A5AY0Y0-0054-G00-00 24E1

Engine Parameter (C454e) A5C00Y0-0054-G00-00 24BA

2.2. Fixed issues

2.2.1. Addition of function/ Change of specifications

1. When bizhub RA is connected to MFP, the following issue is modified.

- bizhub RA can be used on Authentication mode.

- Auto device detecting.

- Prevention of the document in User Box browsing.

2. Quick Security setting is added.

3. Change of exiting the error when Paper Size or Paper type is unmatched.(Added "OK" key)

4. Change the paper jam screen.

5. Color Reversal Screen Display Setting can be used except for the Enlarge Display Mode.

6. Paper feed retry control when fed from manual bypass tray has been added.



Browser (LK-101v3))2014/05/01

It has been added newly to thick paper with C554e/C454e. (It has been mounted to plain paper with current firmware

already.) It has been added newly to plain paper and thick paper with C364e/C284e/C224e.

Paper feed retry control can be disabled by the following Engine FW DipSW.

Engine FW DipSW No. : 20

OFF : Paper feed retry control is enable (Default) ON : Paper feed retry control is disable

* The productivity is lower when paper is fed from manual bypass tray because of paper feed retry control has been added.

Please refer TAD1400892 for details.

7. Correction for the detection failure of toner near empty.

8. Correspondence for the peeling off issue of cleaning blade of Image Transfer Belt Unit.

2.2.2. The following issues are solved in this firmware.

1. Image shift may occur if the main power switch is turned ON while the front door of FS-534 is opened.

2. The specific Indesign file cannot be printed out from MacOS. [RIREP_1300659235]

3. If Page List is displayed by the Program registration screen of FAX/Scan screen, Page name may be garbled.

[PEBJKG1300671379]

4. If PS file created by PlanetPress is printed by LPR command, PS error (unable to write icc conversion file) occurs.

[PEBUS_1300672755]

5. If the port numbers "32768 - 635535" are entered under the following setting, they will not be displayed correctly on

PSWC.

Service Mode>CS Remote Care>Import/Export settings>Port Number

6. Wrong Messages in Overwrite All Data Report Settings are corrected.

7. If a user is belonged in several Account Track, the total count result for application is not matched.

8. Auto update of Firmware fails if the following two conditions are applied at the same time.

- SMB is selected for Download protocol using Kerberos authentication.

- SMB Signature on the Server is enabled.

9. If auto trapping setting is enabled, all job is blank if printing from PCL driver. [PEBIN_1300676899]

10. The color document saved in User Box by public user is printed by the registered User, all pages may be printed as black.

[PEBJTS1300656776]

11. If printing the file including PCL Command (Escape &b1M) by LPR command, all pages are printed as cyan.

[PEBF__1300673822, PEBJOS1300670395]

12. The setting for the registered Program by FAX/Scan is edited, some of settings are turned to default setting.

[PEBJKG1300671462]

13. Unnecessary telnetd is deleted.



Browser (LK-101v3))2014/05/01

14. When a Vendor or Key Counter device is installed on the MFP, C-E301 (detail codes:0xC0E1) occurs if only Vendor is

turned ON after MFP is turned ON.

15. Wrong Messages in Wireless LAN Adapter Setting are corrected.

16. When top menu is displayed by System Auto reset, APP button remains gray-out even after installing OpenAPI application.

[PEBDVS1300668344]

17. When registration and deletion of applications and icons are repeated, the icons will not be displayed correctly.

[PEBDVS1300668344]

18. When top menu is displayed right after rebooting MFP, APP button will not be shown. [PEBDVS1300668344]

19. During the Enhanced Server authentication, the Use's password will not be used and will fail to send E-mails even the

SMTP authentication setting is "Use User Auth. ID and Password". [RIBCN_1300682530]

20. When scanning documents using OpenAPI STA Browser Application, 'SessionID' tag of <DevRptExtJobStatus> message

becomes blank. [RIBUS_1300686944]

21. If the specific PDF file by direct print from AS/400, only one page is printed out. [PEBUS_1300683753]

22. When using SafeQ Authentication, User Name in Log is displayed as "Unknown" if IWS print job is printed.

[RIBSA_1300661213]

23. When printing the file with Half-Fold from USB memory, C-FA14 occurs if Start key is pressed. [PEBJTS1300684758]

24. When LK-110 is enabled and 9 font size document is scanned by Scan to DOCX, the file is not created correctly.

[RIDVRF1300681469]

25. Scan to Email cannot be sent to ArGoSoft Mail Server etc.. [PEOLV_1300671109]

26. Density Adjustment for Thick1 is not reflected. [PEBJKA1300665133]

27. Even "Print" is selected in "TX Result Report Print Settings", "Report Image Setting" and "Report File Format" will not

become gray-out on PSWC.

28. In Function ver.5, import/export of Forward TX setting from PSWC fails.

29. I-FAX can be selected by LDAP Search.

30. When displaying "Favorites settings" screen and "Network" screen on PSWC using Firefox, a warning screen will be

shown.

31. If the setting of DipSW61 is changed and the job is printed, MFP hangs up. [PEBUS_1300675703]

32. When the document saved in User Box is opened from PSWC, the thumbnail is not displayed. [PEBJHK1300687084]

33. When "ON" is selected by the Restrict Broadcasting setting, the destination of User Box, I-FAX and IP address FAX will not

be displayed if the job is forwarded manually.

34. When "Authentication result is displayed when connecting Enhanced Server" is selected for Enhanced Server

authentication, Authentication result screen will not be shown if logged-in by pop-up Login.

35. When "Synchronize by User" is selected in Synchronize User Authentication & Account Track, the Account Track name will

not be recorded in Job Log even after logging-in and copying.

36. [SSDP Settings] button is not displayed on the Administrator mode of operation panel. [RIMNLC1300691732,

PEBAU_1300675346]



Browser (LK-101v3))2014/05/01

Operation Panel : [Administrator Settings] > [Network Settings(2/3)] > [SSDP Settings]

37. If printing a barcode, a part of graphic is not printed. [PEBD__1300682697]

38. A barcode is not printed correctly by MFP in which LK-106 is installed. [PEBF__1300677665]

39. When printing the file by direct print from USB memory, MFP hangs up if Half-Fold is selected after the paper is selected.

[PEBDFS1300682897]

40. When trouble reset is done, you can be called Service mode without CE Password. [PEBAU_1300676492]

41. The print error message is modified when PKI Encryption document is printed and print error occurs.

[RIBUS_1300655342]

42. If Non-Image Area Erase is reset and copying after Book Original is selected, the scanner is overrun.

[PEBJHK1300692876]

43. If Job History is checked from PSWC, Fax Line 1 and Fax Line 2 are mixed. [PEBJOS1300691892]

44. On the MFP with Key counter is installed, "Now printing" screen is not displayed by PC print. [PEBAU_1300657076]

45. The following problem when using a special firmware vGD3-A9 (GC3-A9). [PEBJ__1300697278]

-When printing a document from PCL driver in color mode, abnormal image is printed.

<Model>

C554e/C454e, C754e/C654e

*The problem does not occur on C364e/C284e/C224e.

46. [ " ] which is prohibited to enter will be shown for TX Approval Password.

47. When canceling the selected "Apply Group" from "Apply Group List", it will continue to be indicated.

48. C-E301(detail codes:0xB07A) may occur. [PEBJOS1300675083]

49. The specific pxf certification cannot be imported.

50. When setting SingleSignOn for OpenAPI Setting, it will not be applied often.

51. When "ON" is selected for recording the Authentication result using SSFC card, error occurs if logging into the

Authentication Browser Application.

52. When Auto Reset works while Panel Keyboard is shown, the page of PDF Viewer may not be displayed correctly if Panel

Keyboard is used.

53. A specific PCL file is not printed correctly. [PEBAT_1300682165]

54. "Line Printer ON" is selected on Font settings in PCL settings and printing, Font is not printed correctly.

[PEBNZ_12001508]

55. Printed barcodes cannot be read with barcode reader. [PEBEU_1300658853]

The following Software Switch is added for this issue.

Software Switch No. : 105

HEX Assignment 00 : This modification is not applied. (default)

HEX Assignment 01 : This modification is effective.



Browser (LK-101v3))2014/05/01

<Following modifications will be enabled by this SoftwareSW>

1. NEUGRAY (PureBlack) is set to "ON" by default.

2. The parameters of "Line Width Adjustment" are changed as follows.

Current Parameter -> New Parameter

- Thin -> More Thin level (New parameter)

- Normal -> Same as current Thin level

- Thick -> Same as current Normal level

56. When deleting report jobs save in a User Box, they cannot be deleted.

57. When top menu is selected in System Auto reset settings, the Machine settings cannot be exported correctly.

58. The SMB Shared Box(Folder) may not be accessed. [PEBJHK1300685101]

59. When printing a job from AS400, the output tray of JS-506 cannot be selected. [PEBIT_1300680750]

60. If PS file created by PlanetPress is printed, PS error occurs. [PEBF__1300686033]

61. When pressing Voice Guidance Key in "Incorrect manual Paper Size warning screen", Caution sound will come out.

62. If performing Scan to SMB with Compact PDF using mixed originals, the image is printed abnormally.

[PEBJTS1300667870]

63. The characters inserted by Remote Panel Keyboard will not be entered correctly.

64. Jobs given priority will be printed out during Staple Job proceeded.

65. When IISW request job is issued from CSRC during maintenance, "Operating remotely. Please do not turn off the Power."

will continue to be displayed.

66. When sending jobs by WebDAV, "error" will not be displayed for connection check before starting them.

67. "Please wait" keeps displaying when close key is pushed after the specific Address in Group List is selected.

[PEBJKS1300667607]

68. When "Tab" is selected in Default Application Screen Type settings, the Application Screens for "Send" and "Save User

Box" will not be displayed correctly.

69. After turning main switch off and on, the activity report is printed out every time after the first fax is sent.

[PEBJNG1400701781]

70. When the following two conditions are applied at the same time, the correct warning message will not be shown if network

error occurs.

- E-mail RX(POP) : ON

- Check for New Messages : OFF

71. When switching Block screen in Selection screen, the previous list item will be displayed.

72. When selecting "Protect", the entry screen and keyboard icon will not become gray-out.

73. When DevResExtGetControlData returns Nack by SearchString, list items will be displayed.

74. When 6 or more two-byte characters are entered and fixed for Secure document ID, MFP will be hung up.

75. When returning to Basic screen after Application button is selected in Mapscroller screen, Register key may not be shown.

76. Gray-out APP key in top menu will not be displayed with the correct icon.



Browser (LK-101v3))2014/05/01

77. When sending Scan to E-mail while using OpenAPI Authentication Browser Application, the sender (From) and receiver

(Reply-To) in E-mail Header become garbled. [RIBUS_1300694812]

78. In Vendor 2 Mode, when Key counter is inserted while multiple PullPrint jobs are proceeding, they may not be charged.

79. When sending FAX with Prefix/Suffix enabled, DevReqExtReturnCounterTicket of OpenAPI message will not be sent from

MFP. [PEBDVS1300682170]

80. When Web browser function is not enabled, the browser key in top menu will not become gray-out.

81. In Forward TX setting, when back-up data with User Box destination specified are restored, the setting will not be restored

correctly.

82. When Auto IPv6 and DHCPv6 are ON, communication for Global Address will not work.

83. When a previous password for Confidential RX is entered, a warning screen will be shown.

84. If Cover Sheet printing is carried out from bypass tray, the blank page is printed out from other tray after paper is loaded

when paper empty occurs. [PEBD__1400699620]

85. In Enhanced Server authentication, when "Use User Auth. ID and Password" is selected for SMTP authentication setting,

the correct password will not work to log-in while server is down if incorrect passwords are entered earlier.

86. During Main + Enhanced Server Authentication, Biometric Authentication information will not be registered correctly at the

self-registration screen.

87. On the MFP with Key counter is installed, if turning main switch off and on while FAX job is printed, the fax job is not

reprinted. [RIBJSL1400703126]

88. When switch on the main power after installing a FW, J99-09 may occur.

89. When Network setting data(CSV file) are imported, some part of IPv4 setting will not be corresponded correctly.

90. Barcode will not be printed.

91. When Overwrite HDD Data setting is enabled, the response of panel is delayed gradually. [PEBCZ_1300657137]

92. Auto timeout for Web browser occurs while Web browser is used. [RIBEU_1300651831]

93. If the Fax Job saved in Memory RX User Box is printed from PSWC, SEF paper is always requested.

[PEBJTK1300689537]

94. When printing from WebDAV Client, MFP may keep receiving jobs and may not be printed out.

95. When FIPS setting is ON, a warning screen will be shown if "EAP-TTLS" is set for EAP-Type after "ON" has been selected

for IEEE802.1X authentication setting on PSWC.

96. When PDF file exceeds the maximum size, the job may not be finished properly.

97. When jam occurs in ADF, C-E002 occurs if the following procedure is operated.

-The number of original less than the reset number of original is set in ADF and restart.

98. The entered Hangul character is not displayed correctly. [PESIND1300695285]

99. During Main + Enhanced Server authentication, each function button will become gray-out except Utility button after a

Public User logs in.

100. When ON is selected for Confirm Address(TX), new Fax destination cannot be registered from Fax Scan.

101. When inputting directly for Fax number, alphabets will not be displayed on 10-Key.



Browser (LK-101v3))2014/05/01

102. When ON is selected for Confirm Address(TX), "Next Dest." key is displayed on Confirm Address screen.

103. The setting value of "E-mail Body Print" cannot be exported/imported.

104. Even Maximum Image Log warning is shown, "HDD Settings" key will be displayed.

105. When documents saved in User Box are printed as combine print, they cannot be deleted.

106. After upgrading to Gxx-C8, Forward TX destination becomes blank and C-B152 may occur. [PEBJTG1400708690,

PEBJOS1400711320]

107. For Enhanced Server Authentication and IC Card Authentication(AU-201), C-E301 may occur when logging-in/out is

repeated using IC Card.

108. The certificate of GlobalSign has become out of date.

109. Encryption PDF file with N in 1 cannot be printed by direct print.

110. When scanning with Scan Applications, the scanned data will be saved in a route folder instead of the selected folder.

[RIBJ__1400712937]

111. When Fax is received by manually, the received FAX will not be forwarded to Forward TX destination.

[PEBJTS1400712994, PEBJHK1400714494, RIDVBE1400710216, RIOLV_1400716817]

112. When using Searchable PDF function, C-E301(0xB04A) may occur. [PEBJTK1300687765]

113. When a password is set for RX Data Deletion Restriction Settings, MFP will reboot if Fax RX/Print job is deleted.

114. When accessing with bizhubRA, C-D403may occur.

115. When accessing by bizhubRA, MFP may hang up while printing jobs.

116. C-FA14(0x8ED2) may occur.

117. When pressing keys in the control panel on Meter Count Screen, Panel lock may occur.

118. In Interrupt Mode, a warning screen will be displayed and jobs from maximum allowance User cannot be started.

119. When IWS is enabled, bizhabRA cannot be used to access.

120. When printing the specific prn file with 1200 dpi, the data light may keep flashing.

121. When enhanced server is down, the upper limit setting will not work properly.

122. If logging in/out to/from Authentication application is repeated, MFP is hung up. [RIBUS_1400713648]

123. When using Main + Enhanced Server Authentication and Account Track, blank Address Book List will be displayed on

PSWC.

124. In Mac 10.9, trays selected by printer driver will not be printed.

125. When only using Account Track, Address Book cannot be registered by Administrator from PSWC. [PEDVMT1400712210]

126. When accessing by bizhubRA, MFP may hang up.

127. A spelling error : "copoies" => "copies"

128. Correspondence for the trouble code of C5603 when detecting the skew position failure.

129. Correction of the issue that the machine may send the alarm of toner near empty twice to CSRC.

3. Functional restrictions



Browser (LK-101v3))2014/05/01

1. If the main switch is turned OFF and ON while saving the Fax job in User Box, the thumbnail is not displayed correctly for a

moment.

2. The following characters can enter into Host name from the control panel.

- "." and "-"

* Refer to the Readme.txt file which is included in each driver and application for other functional restrictions.

* Additional memory installation is required when using the following Open API function.

- Initial screen customization



Browser (LK-101v3))2014/05/01

4. How to install

4.1. How to install program

Use USB memory to install. For the details, see the Service Manual.

Conditions for USB memory which can be used for updating the firmware are as follows:

- Securities such as data encryption and password lock shall be released, or the security function shall be turned Off.

- Memory with 1 GB to 2 GB are recommended (One with 4 GB or more may not operate)

- Compatible with USB Version 1.0/2.0 interface

- Formatted with FAT32 type

- A USB flash memory that appears as multiple drives on a computer cannot be used.

4.2. How to upgrade/downgrade firmware

[Definition of terms]

Function Version2: Firmware Version ver.Gxx-42 and earlier.

Function Version2 MR(Maintenance Release) Version: Firmware for Function Version3 Version ver.Gxx-63 or Gxx-A9.

(There are not enhancement functions of Function Version3.) "Function

Version2" has equal functions.

Function Version3: Firmware for Function Version 3 Version ver.Gxx-63 or Gxx-A9.

Function Version2 MR2(Maintenance Release2) Version: Firmware for Function Version5 Version ver.Gxx-C8 and later.



Function Version3 MR(Maintenance Release) Version: Firmware for Function Version5 Version ver.Gxx-C8 and later.



Function Version5: Firmware for Function Version5 Version ver.Gxx-C8 and later.

About Software Switch Settings

Switch No.: 25

HEX Assignment: 40 -> Function Version5



[Caution]

If older than Gxx-C8 firmware is installed to MFP, Gxx-C8 or later cannot be installed by IISW.

Once Gxx-C8 or later firmware is installed by USB memory, Gxx-C8 or later can be installed by IISW.



Browser (LK-101v3))2014/05/01

Please set the following settings to default before downgrading.

- TPM settings

- Default Search Result Display Setting for LDAP

- Shortcut Key for Quick Security



Browser (LK-101v3))2014/05/01

4.2.1. Upgrade

4.2.1-1. Firmware upgrading procedure from Function Version2 to Function Version2 MR2 (Maintenance Release2) Version.

1. Install the Firmware for Function Version5 to MFP.

2. Turn OFF/ON the main switch.

4.2.1-2. Firmware upgrading procedure from Function Version2 to Function Version3 MR (Maintenance Release) Version.

1. If the Voice Data/Movie Data for Function Version2 has been already installed, delete it in Service Mode.



4. Change Software Switch Setting to the following in Service Mode.

Switch No.: 25

HEX Assignment: 20


6. Install Voice Data/Movie Data for Function Version3 to MFP

Please upgrade the printer drivers for Function Version3 if MFP is upgraded to the Firmware for Function Version3 MR.

Because, the Device Information can not be obtained and other problems may occur. And please also upgrade the

Applications.

4.2.1-3. Firmware upgrading procedure from Function Version2 to Function Version5.

1. If the Voice Data/Movie Data/Loadable Driver for Function Version2 has been already installed, delete it in Service Mode.




Switch No.: 25

HEX Assignment: 40


6. Install Movie Data for Function Version3 and Voice Data(If the version is Gxx-E4 or later please use the Voice Data for

MR1)/Loadable Driver for Function Version5 to MFP.

Please upgrade the printer drivers for Function Version5 if MFP is upgraded to the Firmware for Function Version5.


Applications.

4.2.1-4. Firmware upgrading procedure from Function Version2 MR (Maintenance Release) Version to Function Version2 MR2

(Maintenance Release2) Version.





Browser (LK-101v3))2014/05/01

4.2.1-5. Firmware upgrading procedure from Function Version2 MR (Maintenance Release) Version to Function Version3 MR

(Maintenance Release) Version.

1. If the Voice Data/Movie Data for Function Version2 has been already installed, delete it in Service Mode.




Switch No.: 25

HEX Assignment: 20


6. Install Voice Data/Movie Data for Function Version3 to MFP.

Please upgrade the printer drivers for Function Version3 if MFP is upgraded to the Firmware for Function Version3 MR.


Applications.



Browser (LK-101v3))2014/05/01

4.2.1-6. Firmware upgrading procedure from Function Version2 MR (Maintenance Release) Version to Function Version5.





Switch No.: 25

HEX Assignment: 40


6. Install Movie Data for Function Version3 and Voice Data(If the version is Gxx-E4 or later please use the Voice Data for

MR1)/Loadable Driver for Function Version5 to MFP



Applications.

4.2.1-7. Firmware upgrading procedure from Function Version3 to Function Version3 MR (Maintenance Release) Version.



4.2.1-8. Firmware upgrading procedure from Function Version3 to Function Version5.

1. If the Voice Data/Loadable Driver for Function Version3 has been already installed, delete it in Service Mode.




Switch No.: 25

HEX Assignment: 40


6. Install Voice Data(If the version is Gxx-E4 or later please use the Voice Data for MR1)/Loadable Driver for Function

Version5 to MFP.



Applications.

4.2.1-9. Firmware upgrading procedure from Function Version 2 MR2 (Maintenance Release2) Version to Function Version 5.

1. If the Voice Data/Movie Data/Loadable Driver for Function Version 2 has been already installed, delete it in Service Mode.


Switch No.: 25



Browser (LK-101v3))2014/05/01

HEX Assignment: 40


4. Install Movie Data for Function Version 3 and Voice Data(If the version is Gxx-E4 or later please use the Voice Data for

MR1)/Loadable Driver for Function Version 5 to MFP.

Please upgrade the printer drivers for Function Version 5 if MFP is upgraded to the Firmware for Function Version 5.


Applications.



Browser (LK-101v3))2014/05/01

4.2.1-10. Firmware upgrading procedure from Function Version3 MR (Maintenance Release) Version to Function Version5.



Switch No.: 25

HEX Assignment: 40


4. Install Voice Data(If the version is Gxx-E4 or later please use the Voice Data for MR1)/Loadable Driver for Function

Version5 to MFP.



Applications.

4.2.2. Downgrade

4.2.2-1. Firmware downgrading procedure from Function Version 5 to Function Version 2.


2. Change Software Switch Setting to the following in Service Mode

Switch No.: 25

HEX Assignment: 10




6. Install Voice Data/Movie Data/Loadable Driver for Function Version2 to MFP.

Attention: You can not use the Addition of function / Change of specifications.

4.2.2-2. Firmware downgrading procedure from Function Version5 to Function Version2 MR (Maintenance Release) Version.



Switch No.: 25

HEX Assignment: 10






4.2.2-3. Firmware downgrading procedure from Function Version5 to Function Version2 MR2 (Maintenance Release2) Version.



Browser (LK-101v3))2014/05/01




Switch No.: 25

HEX Assignment: 10






Browser (LK-101v3))2014/05/01

4.2.2-4. Firmware downgrading procedure from Function Version5 to Function Version3.



Switch No.: 25

HEX Assignment: 20




6. Install Voice Data/Loadable Driver for Function Version3 to MFP.


4.2.2-5. Firmware downgrading procedure from Function Version5 to Function Version3 MR (Maintenance Release) Version.




Switch No.: 25

HEX Assignment: 20


5. Install Voice Data/Loadable Driver for Function Version3 to MFP.


4.3. How to check card version

[ROM version]:

You can check the ROM version in service mode, "Firmware Version"

For the details, see the Service Manual.

4.4. How to install movie data


4.5. How to install voice data

The following options are required to use the voice guidance function.

- EK-604/ 605 (local interface kit)

- i-Option LK-104 v3


4.6. How to install OCR Dictionary Data for Searchable PDF and PDF/A Font Data



Browser (LK-101v3))2014/05/01


i-Option kit is required to use these functions.

4.7. How to install Unicode Font Data and OCR Font Data

Install Font Data for USB using USB memory.


i-Option kit is required to use these functions



Browser (LK-101v3))2014/05/01

4.8. How to install Loadable Driver

1. Extract the attached exe file and save "xxxxxx.tar" file to root directory of USB memory.

2. Insert the USB memory to USB port of MFP.

3. Call the Service Mode to the screen.

4. Touch [System 2] -> [Driver Install].

5. Touch [SET] and press "Start" button to start installing the data.

6. Check that data is normally installed from the message that appears on the control panel.


8. In the Service Mode> Billing Setting> Management Function Choice, select "Card" or "Body" in "Authentication

Device2" and press "OK" button.

9. Turn ON/OFF the main switch.


5. Program that recommends applying at the same time

Please refer to the PRI for "bizhub C554e/C454e Mass-Production Program Function Version5 (Ver.G20-C8)(for Web Browser

(LK-101v3))" for details. (DLBT1400146EN)

6. OpenAPI supported function level

The following is OpenAPI supported function level on this firmware.

OpenAPI:

OpenAPI Function Level 4.5

Detail:Auth 1.0/1.1/2.0/2.1/2.5/3.5/3.6/3.7/4.0/4.1/4.2/4.5

Scan to Application 2.0/2.1/2.2/3.0/3.1/3.5/3.6/3.7/4.0/4.5

PullPrint 1.0/1.1/2.0/2.1/2.5/3.5/3.6/4.0/4.5

Other A 1.0/3.5/4.0

Job Management 1.0/3.5/3.6/4.0

Setup1.0/1.1/1.2/1.3/2.0/2.1/2.5/3.5/3.6/3.7/3.8/4.0/4.1/4.2/4.

5

Link 4.5



Browser (LK-101v3))2014/05/01

Web Browser

Auth 1.0/1.1/1.5/3.5/3.6/3.7/4.0/4.1/4.2/4.5

Scan to Application 1.0/1.1/3.5/3.6/3.7/4.0/4.1/4.5

PullPrint 1.0/1.1/1.5/3.5/3.6/4.0/4.1/4.5

ScrSvr 1.0/3.5/4.0

Launcher 1.0/3.5/4.0

General 4.0/4.1/4.5



Browser (LK-101v3))2014/05/01

7. IWS function levelIWS function Level 2.0.2

* Company names and product names in this document are the registered trademarks for respective companies.

Copyright(C) 2014 KONICA MINOLTA, INC.


1upload.olivettifrance.fr/Machine Couleur/Copieur Couleur... · Web viewWrong Messages in Wireless...

Documents

Transcript of 1upload.olivettifrance.fr/Machine Couleur/Copieur Couleur... · Web viewWrong Messages in Wireless...