Cmc Ans 11011 Enu
-
Upload
hung-cuong-pham -
Category
Documents
-
view
223 -
download
0
Transcript of Cmc Ans 11011 Enu
-
8/11/2019 Cmc Ans 11011 Enu
1/13
Application Note
Using the Relay Setting Import Filter for Toshiba Relays
AuthorAnucha Semjan |[email protected]
DateNov 4, 2011
Related OMICRON ProductsCMC Test Sets, Test Universe
Application AreaDistance Protection Relay
KeywordsRelay Setting, Import Filters, RSM100, Toshiba
Versionv1.0
Document IDANS_11011_ENU
mailto:[email protected]:[email protected]:[email protected]:[email protected] -
8/11/2019 Cmc Ans 11011 Enu
2/13
Content
1 Introduction ..................................................................................................................................... 3
2 How to export the setting parameters from RSM100 software...................................................... 3
3 How to import the XRIO Converter of the PTL into the Test Object .............................................. 5
4 How to import the setting parameters into the XRIO Converter ................................................... 8
5 How to use the errors v iew for tracking the imported setting parameters ..................................11
Please use this note only in combination with the related product manual which contains several important safetyinstructions. The user is responsible for every application that makes use of an OMICRON product.
OMICRON electronics GmbH including all international branch offices is henceforth referred to as OMICRON.
OMICRON 2011. All rights reserved. This application note is a publication of OMICRON.
All rights including translation reserved. Reproduction of any kind, for example, photocopying, microfilming, opticalcharacter recognition and/or storage in electronic data processing systems, requires the explicit consent of OMICRON.Reprinting, wholly or in part, is not permitted.
The product information, specifications, and technical data embodied in this application note represent the technicalstatus at the time of writing and are subject to change without prior notice.
We have done our best to ensure that the information given in this application note is useful, accurate and entirelyreliable. However, OMICRON does not assume responsibility for any inaccuracies which may be present.OMICRON translates this application note from the source language English into a number of other languages. Anytranslation of this document is done for local requirements, and in the event of a dispute between the English and a non-English version, the English version of this note shall govern.
-
8/11/2019 Cmc Ans 11011 Enu
3/13
1 Introduction
The aim of this document is to describe how to use the OMICRON Relay Settings Import Filter and how toexport the setting file from RSM100 software (Toshiba's software relay interface). Three steps as mentionedbelow will be used and described in this document.
> Step 1: Export the setting parameters from RSM100 software
> Step 2: Import the XRIO Converter from PTL
> Step 3: Import the setting parameters, which have been exported from RSM100 software, into the XRIOConverter
Figure 1: How to use the import filter
2 How to export the setting parameters from RSM100 software
> Step 1: Open the RSM100 software, and then open the setting file which need to be exported, themodel GRZ100 will be used as an example in this document.
-
8/11/2019 Cmc Ans 11011 Enu
4/13
Figure 2: The settings menu for RSM100
> Step 2: Press the button Outputon theTool Bar.Or select the main menu Fileand then select themenu Outputto export the setting file.
Figure 3: The button Output for exporting the setting parameters in the CSV format
-
8/11/2019 Cmc Ans 11011 Enu
5/13
Figure 4: The menu for exporting the setting parameters in the CSV format
> Step3: Save the setting file in the CSV format
Figure 5: Save the setting file
3 How to import the XRIO Converter of the PTL into the Test Object
The XRIO Converter from PTL (Protection Test Library) has to be installed on your computer before you canproceed with the steps below.
> Step 1: Open the test module which you want to use for testing; the Advance Distance module willbe used in this document. After that open the test object.
-
8/11/2019 Cmc Ans 11011 Enu
6/13
Figure 6: The test module for testing
> Step 2: Select the main menu Fileand then select Importfor importing the XRIO Converter
Figure 7: The menu for importing the XRIO Converter
> Step 3: Press thePTL Folderbutton for selecting the XRIO Converter.
-
8/11/2019 Cmc Ans 11011 Enu
7/13
Figure 8: PTL Library
> Step 4: Select the XRIO Converter by choosing the manufacturer and the relay model
Figure 9: Select the XRIO Converter
> Step 5: Finish the process for importing the XRIO Converter.
-
8/11/2019 Cmc Ans 11011 Enu
8/13
Figure 10: Tree view of the setting parameters after importing the XRIO Converter
4 How to import the setting parameters into the XRIO ConverterThe OMICRON Relay Settings Import Filterhas to be installed on your computer before you can proceedwith the steps below.
> Step 1: Continue from previous stage when the XRIO Converter is already imported. Select the mainmenu Fileand then select the sub menu Import relay settingsfor importing the setting parameters
Figure 11: Menu for importing the relay setting parameters
> Step 2: Select the Filter fo r Toshiba RSM100.csv Settingfilter from the list.
-
8/11/2019 Cmc Ans 11011 Enu
9/13
Figure 12: Standard Filter for Toshiba RSM100.csv
> Step 3: Browse the setting files (*.csv format) which exported from the RSM100 software aspreparing in the step above, and then press open to confirm.
Figure 13: Browse the setting file (CSV format)
> Step 4: The number and the information of the setting parameters which have been imported intothis XRIO Converter will be shown after the process is finished. If there are no differences betweenthe imported and the settings in the XRIO Converter the number will be zero.
-
8/11/2019 Cmc Ans 11011 Enu
10/13
Figure 14: The message when finished
> Step 5: Finish the process by clicking the OK button. The characteristic of the relay according tothese setting parameters is ready for testing.
-
8/11/2019 Cmc Ans 11011 Enu
11/13
Figure 15: Test view after finish the process
5 How to use the errors view for tracking the imported setting parameters
> Step 1: When finish the process above to import the setting parameters. We will see the informationwhich parameter are imported in the error window.
Figure 16: The Error window
> Step 2: If you need to track and confirmation the imported value are correct then you can doubleclick on the parameter in the error view. The software will show the value of that parameter.
-
8/11/2019 Cmc Ans 11011 Enu
12/13
Figure 17: Tracking the setting parameters
-
8/11/2019 Cmc Ans 11011 Enu
13/13
OMICRONis an international company serving the electrical power
industry with innovative testing and diagnostic solutions. The application ofOMICRON products provides users with the highest level of confidence in
the condition assessment of primary and secondary equipment on theirsystems. Services offered in the area of consulting, commissioning,testing, diagnosis, and training make the product range complete.
Customers in more than 140 countries rely on the company's ability tosupply leading edge technology of excellent quality. Broad applicationknowledge and extraordinary customer support provided by offices inNorth America, Europe, South and East Asia, and the Middle East,together with a worldwide network of distributors and representatives,make the company a market leader in its sector.
Europe, Middle East, Africa
OMICRON electronics GmbHOberes Ried 1
6833 Klaus, AustriaPhone: +43 5523 507-0Fax: +43 5523 [email protected]
Asia-Pacifi c
OMICRON electronics Asia LimitedSuite 2006, 20/F, Tower 2The Gateway, Harbour CityKowloon, Hong Kong S.A.R.Phone: +852 2634 0377
Fax: +852 2634 [email protected]
Amer icas
OMICRON electronics Corp. USA12 Greenway Plaza, Suite 1510
Houston, TX 77046, USAPhone: +1 713 830-4660
+1 800-OMICRONFax: +1 713 [email protected]
For addresses of OMICRON offices with customer service