Post on 20-Nov-2021
8 0 6 8 6 3 A 0 31 / 5
s
Front Busbar Connection Piezas frontales de conexión a barrasPlages de raccordement avant
Installation Instructions / Instructivo de Instalación
Use only with Siemens certified Components.Utilizar únicamente con componentes certificados de Siemens.A utiliser uniquement avec les composants certifiés Siemens .
Turn off and lock out all power supplying this device before working on this device.Replace all covers before power supplying this device is turned on.
Couper l'alimentation de l'appareil et barrer avant de travailler.Remplacez touts les couverts avant quel'approvisionnement de pouvoir soit alimenté.
Tensión peligrosa.Puede causar la muerte o lesiones graves.
Tension dangereuse.Danger de mort ou risque de blessures graves.
Hazardous VoltageWill cause death or serious injury
Desenergice totalmente antes de instalar o darle servicio. Reemplace todas las barreras y cubiertas antes de energizar el interruptor.
Turn off and lock out all power supplying this device before working on this device.Replace all covers before power supplying this device is turned on.
Couper l'alimentation de l'appareil et barrer avant de travailler.Remplacez touts les couverts avant quel'approvisionnement de pouvoir soit alimenté.
Tensión peligrosa.Puede causar la muerte o lesiones graves.
Tension dangereuse.Danger de mort ou risque de blessures graves.
Hazardous VoltageWill cause death or serious injury
Desenergice totalmente antes de instalar o darle servicio. Reemplace todas las barreras y cubiertas antes de energizar el interruptor.
I.L. No. 806863A03
Item: FBCD3FBCF3FBCJ3FBCL3
U.S. Cat. No. Euro Order No.
3VL9200-4EC313VL9300-4EC313VL9400-4EC313VL9460-4EC31
Cal. ISO 6789
5 mm6 mm8 mm
NOT suitable for use with 100% rated circuit breakers, Molded Case Switch or Motor Circuit Protector.[ NO para uso con interruptores a 100% intensidad continua, Interruptor de Caja Moldeada o Protector del Circuito del Motor. ]
DG FBCD3 / 3VL9200-4EC31
3XM6 X 20mm
3X
3X
FGFBCF3 / 3VL9300-4EC31
3XM8 X 20mm
3X
3X
Do NOT use in combination with compression lugs or mechanical lugs.No usar en combinación con bornes mecánicos o con bornes de compresión.
NOTE - These instructions do not purport to cover all details or variations inequipment, or to provide for every possible contingency to be met inconnection with installation, operation or maintenance. Should further informationbe desired or should particular problems arise, which are not covered sufficientlyfor the purchaser’s purposes, the matter should be referred to the local Siemenssales office. The contents of this instruction manual shall not become part of ormodify any prior or existing agreement, commitment or relationship. The salescontract contains the entire obligation of Siemens. The warranty contained inthe contract between the parties is the sole warranty of Siemens. Any statementscontained herein do not create new warranties or modify the existing warranty.
Trademarks - Unless otherwise noted, all names identified by ® are registeredtrademarks of Siemens AG or Siemens Industry, Inc. The remaining trademarksin this publication may be trademarks whose use by third parties for their ownpurposes could violate the rights of the owner.
For use with Frame:Para Usar Con Caja Base:
DGFGJGLG
JG FBCJ3 / 3VL9400-4EC31
3X
3X
3X M8 X 25 mm
3X M8
3X M8 LG FBCL3 / 3VL9460-4EC31
3X M8 X 35mm
3X3X M8
3X M8
3X
3X
2
3
1 DG / FG
2 / 5
Trip[ Interrumpir ]
2
1
OFF / O
Assure all electrical clearances are maintained.
Tensión peligrosa.Puede causar la muerte o lesiones graves.
Tension dangereuse.Danger de mort ou risque de blessures graves.
Hazardous VoltageWill cause death or serious injury
Asegure mantener los espacios eléctricos. Assurez que tous les dégagements électriques sont maintenus.
I.L. No. 806863A03
The Installer is responsible for the Front Busbar Connector's final qualification for use within their equipment.[El Instalador es responsable de la última calificación de las partes frontales de la conexión a barras para usar en su equipo.]10”
[ 254mm ] Max.
10”[ 254mm ]
Max.
Recommended Bracing Information[Información de soporte recomendada]
Maintain minimum ground clearances.
.
OK
OK
Turn off and lock out all power supplying this device before working on this device.Replace all covers before power supplying this device is turned on.
Couper l'alimentation de l'appareil et barrer avant de travailler.Remplacez touts les couverts avant quel'approvisionnement de pouvoir soit alimenté.
Tensión peligrosa.Puede causar la muerte o lesiones graves.
Tension dangereuse.Danger de mort ou risque de blessures graves.
Hazardous VoltageWill cause death or serious injury
Desenergice totalmente antes de instalar o darle servicio. Reemplace todas las barreras y cubiertas antes de energizar el interruptor.
Turn off and lock out all power supplying this device before working on this device.Replace all covers before power supplying this device is turned on.
Couper l'alimentation de l'appareil et barrer avant de travailler.Remplacez touts les couverts avant quel'approvisionnement de pouvoir soit alimenté.
Tensión peligrosa.Puede causar la muerte o lesiones graves.
Tension dangereuse.Danger de mort ou risque de blessures graves.
Hazardous VoltageWill cause death or serious injury
Desenergice totalmente antes de instalar o darle servicio. Reemplace todas las barreras y cubiertas antes de energizar el interruptor.
3 / 5 I.L. No. 806863A03
JG / LG
21
Trip[ Interrumpir ]
4 5
DG
40 lb.in.[ 4.5 Nm ]
5 mmFG
89 lb.in.[ 10 Nm ]
6 mm
4
cli c
3
4 / 5
7
5
OK OK
I.L. No. 806863A03
6 JG
JG
133 lb.in.[ 15 Nm ]
6 mm
2
1
OFF / O
3
LG
LG
133 lb.in.[ 15 Nm ]
6 mm
2
3
1
OFF / O
OK
OK
806863A035 / 5
For Support in Europe refer to :Bestell-Nr. / Order No.: 3ZX1012-0VL68-4AA2 Internet: www.siemens.de/lowvoltage/technical-assistance GWA 4NEB 179 6863-10 DS 04
10
8
4X 11 lb.in.[ 1.2 Nm ]
9
Subject to change without prior notice © Siemens Industry Inc. 2012Siemens Industry, Inc. , Norcross, GA 30092 U.S.A.
Technical Support: Toll Free: 1-800-241-4453 Internet: www.usa.siemens.com/powerdistribution
OptionOpción
JG / LG
LG
2
1