VMC1 Leaflet 0807
Transcript of VMC1 Leaflet 0807
8/2/2019 VMC1 Leaflet 0807
http://slidepdf.com/reader/full/vmc1-leaflet-0807 1/2
S e a r c h i n g w i t h E x c e l le n c eVallon GmbH n Im Grund 3 n D-72800 Eningen n Phone: +49.7121.9855-0 n Fax: +49.7121.83643
E-Mail: [email protected] n internet: www.vallon.de
Detectors made in Germany
¢
¢
¢
¢
¢
¢
¢
¢
VMC1 Mine Detector
The compact detector for special tasks
Retracted size only 370 x 140 x 70 mm
Lightweight
Pinpoint mode
Highly eective automatic
ground balance
Length continuously adjustable
Ease o operation
Metal alarm:
visual bargraph
audio signal
silent vibration
Input or frmware upgrade
OPTIONAL ACCESSORIES(not necessary or the basic unction)
HARD CASE
The watertight hard case oers a sae and convenienttransport o the complete set with backpack and ac-cessories.
HEADSET
This headphone is very lightweight. The sot designassures that it can be worn conveniently or long peri-ods o time, even under a helmet.
RECHARGEABLE BATTERIES (Ni-MH)3 ea. 1.24 V recharcheable batteries, C-size
CHARGING SETCharging station set with car adaptermains voltage: 100-240 Volts, 50/60 Hz AC
or 12-15 Volts DC
General:
Power supply: 3 ea. 1.5 V standard batteriesC-size
Battery lie: up to 8 hours
Sweeping speed: 0.2 - 1.5 m/s — standard
0 - 1.5 m/s — pinpointing
Operation temperature: -32° C to +60° CStorage temperature: -55° C to +75° C
Search programs: 2 soil programs
Power line suppression: automatic
Presswatertight: up to 1.5 m (search head)
Alarm signal: audio, visual, vibration
Input/output: RS232, Headset
Complian ce to environ- According to MIL STD 810Fmental conditions: 501.4-II, 502.4-I, 502.4-II, 503.4,
506.4-III, 514.5 C1
Dimensions (approx.)
Detector retracted: 370 x 140 x 70 mm (LxWxH)
Telescopic carrying bar: min. length: 545 mmmax. length: 1255 mm
Field backpack: 390 x 220 x 120 mm (LxWxH)
Hard case 410 x 330 x165 mm (LxWxH)
Weights (approx.)
Field backpack: 0.72 kgHard case: 2.02 kg
Complete detector during operation: 2.4 kg(with batteries)
Transport weight in feld backpack: 3.1 kgTransport weight in hardcase: 5.4 kg
Headset: 110 g
All technical data are subject to change without prior notice.Issue 08/2007
Technical Data
8/2/2019 VMC1 Leaflet 0807
http://slidepdf.com/reader/full/vmc1-leaflet-0807 2/2
This new design Vallon Metal Detector VMC1 is a retract-ible detector or demining. It is supplied with a sot carry-ing bag housing the complete mine detecting set. Due toits small packing size it needs extremely little space ortransportation and thus acilitates operation in impassableareas.Inspite o the compact design Vallon made no compromisewith regards to the detection eatures. The VMC1 is a ullyadequate Vallon Metal Detector oering highest detection
sensitivity and detection stability.The modern used technology as well as simple and easy tounderstand operation elements ensure a high demining re-liability. The metal alarms are very clear so that the opera-tor can work without a headset and any external cables.
Search Head with Telescopic Pole
The rugged search head contains the Digital Pulse Induc-tion Sensor with integrated noise reduction eatures. Theshape allows easy operation in difcult and dense vege-tation, rocks, shallow water and mud. This unique designprovides precise pinpointing and an excellent separationbetween narrow placed targets without loss o detectionspeed.The telescopic pole consists o three tubes. The length is
easily adjustable even during operation in just a ew sec-onds so that detection work can be done in standing, kneel-ing or proning position.
Modern Electronics
Detected metals are clearly indicated by– audio signal via a non-magnetic loudspeaker– LED bargraph with 14 elements, clearly visible even in
the sunlight– vibrator to warn the deminer addition ally, especially
i detection work is done in noisy environment.
The operation elements are limited to the ollowing:
Mode Selector:
O: OFFN: normal soilM: mineralized soil
volume control
3 rigid push buttons:
-: decrease (volume, sens.)+: increase (volume, sens.)C: compensation (ground balance)
VMC1 MINE DETECTORFor pinpointing a separate button on the handle.
Individual alarm combinations can be programmed subse-quently by authorized personal.An automatic continuous sel check o six important unc-tions including cable damage and battery level control isthe lie insurance or the deminer. System ailures are im-mediately indicated by a special audio alarm and a speciallight indication.
The automatic detection level control guarantees a long-term constant sensitivity or hours o operation independ-ent o the battery level, temperature and other environ-mental conditions.
Setting into Operation
The VMC1 requires only minimal operator training. No as-sembly, the cable is running inside. The transport bag con-tains a feld manual.
- Open the bag- Take the detector- Insert the batteries- Open the search head- Pull out the arm rest- Lit handle- Adjust the length o the telescopic pole- Switch ON and search
Trained operators can start in less than 20 seconds.
Transportation
The VMC1 comes with a small, sot carrying bag made romsynthetic material. It can be fxed to the operator’s hip andthigh.