Mactac Soignies Carte Couleurs Films Adhésifs MACsoft 900

2
Colour card MACtac EUROPE Boulevard Kennedy B-7060 Soignies - Belgium Tel : +32 (0) 67-346 211 Fax : +32(0)67-330 574 [email protected] www.MACtac.eu MACtac Australia/NZ Tel. : +64 (0)9 920 6057 Fax : +64 (0)9 523 6863 E-mail: [email protected] MACtac BENELUX Tel.: +32 (0) 67-346 211 Fax: +32 (0) 67-346 346 E-mail: [email protected] MACtac CZECH REPUBLIC Tel.: +420 (0) 224 240 700 Fax: +420 (0) 224 210 354 E-mail: [email protected] MACtac DEUTSCHLAND Tel.: +49 (0) 221-597 89 0 Fax: +49 (0) 221-597 89 10 E-mail: [email protected] MACtac ESPAÑA Tel.: +34.90.215 7994 Fax: +34.93.335 0100 E-mail: [email protected] MACtac FRANCE Tel.: +33 (0)1 64 54 78 00 Fax: +33 (0)1 69 34 54 15 E-mail: [email protected] MACtac HUNGARY Tel.: + 36-(1)-225 1814 Fax: + 36-(1)-225 3793 E-mail: [email protected] MACtac ITALIA Tel.: +39 02-353 71 81 Fax: +39 02-353 718 41 E-mail: [email protected] MACtac POLSKA Tel.: +48 22/721 75 80 Fax: +48 22/721 75 81 E-mail: [email protected] MACtac SCANDINAVIA AB Tel.: +46 (0) 40-680 31 30 Fax: +46 (0) 40-680 31 39 E-mail: [email protected] MACtac SCHWEIZ Tel.: +41 (0) 52-720 80 00 Fax: +41 (0) 52-720 70 14 E-mail: [email protected] MACtac U.K. Tel.: +44 (0)1604-644 697 Fax: +44 (0)1604-75 790 495 E-mail: [email protected] ® Registered Trademark of Morgan Adhesives Company. MACtac ® Worldwide Locations MACtac NORTH AMERICA Tel.: +1-330-688-1111 Fax: +1-330-688-2540 E-mail: [email protected] www.MACtac.com MACtac Mexico Tel.: +52-444-799-0303 Fax: +52-444-799-0309 E-mail: [email protected] MACtac ASIA PACIFIC MACtac SINGAPORE Tel: +65-6741 3088 Fax: +65-6741 5088 E-mail: [email protected] MACtac SHANGHAI CHINA Tel. +86-021-50589370 Fax :+86-021-50589375 E-mail: [email protected] 2818 FL-02.11 1 2 3 4 5 6 7 8 9 10 » Vinyle pour banderoles Spandoekvinyls VOTRE DISTRIBUTEUR - UW DISTRIBUTEUR Ans/Jaar

Transcript of Mactac Soignies Carte Couleurs Films Adhésifs MACsoft 900

Page 1: Mactac Soignies Carte Couleurs Films Adhésifs MACsoft 900

Colour card

MACtac EUROPEBoulevard KennedyB-7060 Soignies - BelgiumTel : +32 (0) 67-346 211Fax : +32(0)67-330 [email protected]

MACtac Australia/NZTel. : +64 (0)9 920 6057Fax : +64 (0)9 523 6863E-mail: [email protected]

MACtac BENELUXTel.: +32 (0) 67-346 211Fax: +32 (0) 67-346 346E-mail: [email protected]

MACtac CZECH REPUBLICTel.: +420 (0) 224 240 700Fax: +420 (0) 224 210 354E-mail: [email protected]

MACtac DEUTSCHLANDTel.: +49 (0) 221-597 89 0Fax: +49 (0) 221-597 89 10E-mail: [email protected]

MACtac ESPAÑATel.: +34.90.215 7994Fax: +34.93.335 0100E-mail: [email protected]

MACtac FRANCETel.: +33 (0)1 64 54 78 00Fax: +33 (0)1 69 34 54 15E-mail: [email protected]

MACtac HUNGARYTel.: + 36-(1)-225 1814Fax: + 36-(1)-225 3793E-mail: [email protected]

MACtac ITALIATel.: +39 02-353 71 81Fax: +39 02-353 718 41E-mail: [email protected]

MACtac POLSKATel.: +48 22/721 75 80Fax: +48 22/721 75 81E-mail: [email protected]

MACtac SCANDINAVIA ABTel.: +46 (0) 40-680 31 30Fax: +46 (0) 40-680 31 39E-mail: [email protected]

MACtac SCHWEIZTel.: +41 (0) 52-720 80 00Fax: +41 (0) 52-720 70 14E-mail: [email protected]

MACtac U.K.Tel.: +44 (0)1604-644 697Fax: +44 (0)1604-75 790 495E-mail: [email protected]

® Registered Trademark of Morgan Adhesives Company.

MACtac® Worldwide Locations

MACtac NORTH AMERICATel.: +1-330-688-1111Fax: +1-330-688-2540E-mail: [email protected]

MACtac MexicoTel.: +52-444-799-0303Fax: +52-444-799-0309E-mail: [email protected]

MACtac ASIA PACIFIC MACtac SINGAPORETel: +65-6741 3088Fax: +65-6741 5088E-mail: [email protected]

MACtac SHANGHAI CHINATel. +86-021-50589370Fax :+86-021-50589375E-mail: [email protected]

2818

FL-

02.1

1

1 2 3 4 5 6 7 8 9 10 »

Vinyle pour banderolesSpandoekvinyls

VOTRE DISTRIBUTEUR - UW DISTRIBUTEUR

Ans/Jaar

Page 2: Mactac Soignies Carte Couleurs Films Adhésifs MACsoft 900

928-00 White ± RAL 9003

982-00 Medium Brown

948-00 Medium Green ± RAL 6024

908-00 Lemon Yellow ± RAL 1018

958-04 Cyclamen

948-03 Dark Green ± RAL 6005

908-09 Dark Yellow ± RAL 1003

938-05 Ultramarine Blue ± RAL 5002

988-05 Light Grey ± RAL 7004

902-00 Orange ± RAL 2008

938-01 Vivid Blue ± RAL 5017

988-06 Dark Grey ± RAL 7012

958-02 Vivid Red ± RAL 3020

938-04 Sky Blue

988-00 Black

958-01 Blood Red ± RAL 2002

948-04 Turquoise

978-00Gold

958-00 Medium Red ± RAL 3001

948-02 Apple Green ± RAL 6018

3

ProductbeschrijvingMACsoft 900 is een uiterst soepele gestabiliseerde snijfolie belijmdmet een permanente acryllijm met een lage aanvangskleefkracht.MACsoft 900 is ontworpen voor probleemloos computersnijden ensnel pellen, zelfs voor kleine letters en dunne lijnen.

LijmHoogwaardige duurzame permanente acryllijm op solvent basis.

RugpapierZeer stabiel 135 g/m2 wit kraft papier met blauwe rugbedrukking.

ToepassingenMACsoft 900 is speciaal ontworpen voor belettering van geplastificeerdePVC spandoeken (PVC gecoat textiel) die gebruikt wordenvoor cultuur- of sportevenementen, tentoonstellingen, promoties ingrootwarenhuizen, openbare gebouwen, enz. …MACsoft 900 is geschikt voor binnen- en buitentoepassingen.MACsoft 900 heeft een lage kleefkracht op polyester doeken ennon woven polyolefine.

Technische gegevens (*) Gemiddelde waarden

Dikte (enkel film) 70 μm

Levensduur(verticale opstelling in een 3 jaarCentraal Europees klimaat).

Kleefkracht (FTM 1)Na 20 min. op roestvrij staal 14 N/25mmNa 1 week op roestvrij staal 20 N/25mm

Dimensionele stabiliteit (FTM 14)48 u. op 70 °C op aluminium < 0.5 %

Minimum aanbrengtemperatuur + 10 °CGebruikstemperatuur Van – 20 °C tot + 70 °C

Trekkracht (DIN 53455-5) > 20 N/15mmRekweerstand bij breuk (DIN 53455-5) > 150 %

Stockage(20 °C – 50 % relatieve vochtigheid) 2 jaar

Bestendigheid tegen oplosmiddelen Water, water met detergent,op roestvrij staal 72 uur voor het en chemicaliën (aangebrachtonderdompelen) alcohol : onaangetast Olie, benzine : aangetast (loskomende randen).

Brandbaarheid (ISO 3795) Zelfdovend, aangebracht op aluminium

Belangrijke opmerkingenAlle oppervlakken op dewelke het materiaal angebracht wordt, moeten grondig gereinigd worden om alle stof, vet of andere bron van vervuiling te verwijderen.Het gebruik van verniste spandoeken is aangeraden om mogelijke migratie van weekmakers in de lijm van de MACsoft 900 te vermijden of te verminderen. In alle gevallen moet de compatibiliteit van de MACsoft 900 met de spandoeken getest worden alvorens over te gaan tot een uitgebreide toepassing. Voor het aanbrengen van de MACsoft 900 is het ook aangeraden het spandoek met isopropylalcohol schoon te maken.

(*) De over MACtac-produkten gepubliceerde informatie is gebaseerd op bevindingen die voortkomen uit een diepgaand, wetenschappelijk onderzoek dat door de firma als degelijk wordt beschouwd.Nochtans is deze informatie op zichzelf niet als een waarborg te interpreteren. Wegens de grote verscheidenheid der toepassingsmogelijkheden van MACtac produkten en de steeds toenemende toepassingsgebieden, moet de koper de geschiktheid ervan voor iedere toepassing in vraag stellen en onderzoeken of de beoogde produkten aan de gestelde eisen kunnen voldoen. De koper zal uitsluitend en alleen alle risico’s dragen verbonden aan hun gebruik.De verkoper zal in geen enkel geval aansprakelijk zijn voor opgelopen schade die meer zou bedragen dan de aankoopwaarde van de gewraakte produkten, noch voor onrechtstreekse of toevallig opgelopen schade als gevolg van het gebruik zijner produkten. Alle specificaties zijn onderhevig aan veranderingen zonder voorafgaande kennisgeving.

DescriptionMACsoft 900 est un film de vinyle stabilisé super souple enduit d’unadhésif acrylique permanent à faible adhésion initiale.MACsoft 900 est spécialement conçu pour assurer une découpe parordinateur et un échenillage facile et rapide même pour des petitscaractères ainsi que de fins filets.

AdhésifAdhésif acrylique permanent transparent à base solvant.

ProtecteurPapier kraft blanc de 135 g/m2 très stable, quadrillé bleu au dos.

Domaines d’utilisationMACsoft 900 est spécialement conçu pour le marquage sur bâchesplastifiées (textile enduit de PVC).MACsoft 900 convient pour les applications extérieures et intérieures(bannières pour événements sportifs, culturels, pour bâtiments enrénovation, bannières de rue, de supermarchés, …).MACsoft 900 a une adhésion faible sur tissus polyester, non tissé enpolyoléfine.

Données techniques (*) Valeurs moyennes

Epaisseur (film seul) 70 μm

Durabilité(vieillissement vertical en 3 ansEurope centrale)

Adhésion (FTM 1)20 min. sur acier inox 14 N/25mm1 semaine sur acier inox 20 N/25mm

Stabilité dimensionnelle (FTM 14)48 H à 70°C sur aluminium < 0.5 %

Température minimale d’application + 10 °CTempératures d’utilisation De – 20 °C à + 70 °C

Résistance à la traction (DIN 53455-5) > 20 N/15mmElongation à la rupture (DIN 53455-5) > 150 %

Stockage(20 °C – 50 % humidité relative) 2 ans

Résistance aux solvants et chimiques Eau, eau + détergent, alcools :(appliqué sur acier inoxydable non affecté.72 heures avant immersion) Graisses, essence : affecté (soulèvement des bords)

Comportement au feu (ISO 3795) Auto-extinguible, appliqué sur aluminium

Remarques importantesLa surface à coller doit être exempte de poussière, de graisse ou detout autre contaminant.Les bâches laquées sont recommandées pour éviter ou limiter la migration de plastifiants de la bâche. Il est conseillé de vérifier la compatibilité du MACsoft 900 avec la bâche avant de procéder à des applications en séries, ainsi que de dégraisser la bâche à l’alcool isopropylique avant l’application.

(*) Les informations publiées sur les produits MACtac sont basées sur des recherches que la Société considère comme sûres; elles ne constituent cependant pas une garantie.Etant donné la grande diversité des usages possibles et le développementcontinuel de nouvelles possibilités, l’utilisateur doit examiner attentivement les aptitudes et les performances du produit pour chaque utilisation précise et il assume seul tous les risques relatifs à cette utilisation.Le vendeur ne sera responsable des dommages qu’à concurrence du prix d’achat des produits et ne sera pas responsable des dommages indirects ou fortuits. MACtac se réserve le droit d’apporter en tout temps et sans avis préalable des modifications à ses spécifications.

Technische InformatieFiche technique