Post on 29-Jan-2021
Argonics, Inc. • 520 9th St., Gwinn, MI 49841 • P: 800.991.2746 F: 906.226.9779www.argonics.com/agriculture-rollers
ARGONICSENGINEERED POLYURETHANE™
Idler Rollers . . . . . . . . . . . . . . . . . 2
HD Idler Rollers . . . . . . . . . . . . . . . 3
RC Idler Rollers . . . . . . . . . . . . . . . 4
RD Idler Rollers . . . . . . . . . . . . . . . 5
Spindle Rollers . . . . . . . . . . . . . . . . 6
RC Series Rubber on Steel Rollers . . . . . . 7
HD Series Urethane on Steel Rollers . . . . . 8
Nose Rollers . . . . . . . . . . . . . . . . . 9
Shakers . . . . . . . . . . . . . . . . . . . 10
Acorn Rollers . . . . . . . . . . . . . . . . 11
Finger Rollers . . . . . . . . . . . . . . . . 12
Heavy Duty Chiller Rollers . . . . . . . . . . 13
TABLE OF CONTENTS
EFFECTIVE DATE: NOVEMBER 4 , 2019
All information, drawings and pricing contained within this roller guide are copyright of Argonics, Inc.
NOT FOR REDISTRIBUTION
All drawings contained in this roller guide are for identification purposes only. No drawings are shown to scale and their dimensions are for reference only.
Kryptane agricultural rollers are protected by one or more of the following patents: 6,746,387; 7,201,713.
© 2019 Argonics, Inc.
KRYPTANE® ROLLER GUIDE
Notes:• Roller case quantities are 12 unless otherwise specified .
• All orders over $2,000 receive free freight
Page 2
Effective: November 4, 2019
Argonics, Inc. • 520 9th St., Gwinn, MI 49841 • P: 800.991.2746 F: 906.226.9779www.argonics.com/agriculture-rollers
POLYURETHANE IDLER ROLLERSCustom sealed 6204 bearing in a polyurethane tire
AG-R401000
1 Inch Urethane IdlersDiameter
AWidth
BAxle Dia.Part Number
AG-R241000 2-3/8” 1” 5/8”AG-R301000 3” 1” 5/8”AG-R401000 4” 1” 5/8”AG-R501000 5” 1” 5/8”AG-R601000 6” 1” 5/8”AG-R701000 7” 1” 5/8”
5/8”
SH
AFT
����������������������
A
B
Page 3
Effective: November 4, 2019
Argonics, Inc. • 520 9th St., Gwinn, MI 49841 • P: 800.991.2746 F: 906.226.9779www.argonics.com/agriculture-rollers
R SER IES HEAVY DUTY ROLLERS• 11∕2” wide heavy duty polyurethane idler rollers on a steel hub• Utilizes our patented protection system including custom 6204
bearings and grooved lip sealed standoffs
AG-R501500Diameter
A
DiameterA
DiameterA
WidthB
WidthB
WidthB
Axle Dia.
Axle Dia.
Axle Dia.
Part Number
Part Number
Part Number
AG-R401500-50 4” 1-1/2” 1/2”AG-R501500-50 5” 1-1/2” 1/2”AG-R601500-50 6” 1-1/2” 1/2”
AG-R401500 4” 1-1/2” 5/8”AG-R501500 5” 1-1/2” 5/8”AG-R601500 6” 1-1/2” 5/8”
AG-R401500-75 4” 1-1/2” 3/4”AG-R501500-75 5” 1-1/2” 3/4”AG-R601500-75 6” 1-1/2” 3/4”
A
B
Section ViewAG-R501500
HEAVY DUTYIDLER ROLLER(AG-R501500)
B
A
3/4”
SH
AFT
5/8”
SH
AFT
1/2”
SH
AFT
1/2” Diameter Shaft 5/8” Diameter Shaft 3/4” Diameter ShaftPart # Part # Part #
Roller Width
1-1/2” AG-RK-1500-50 AG-RK-1500 AG-RK-1500-75 2-1/2” AG-RK-2500-50 AG-RK-2500 AG-RK-2500-75 H
D S
ERIE
S RE
PAIR
KIT
S
Kits for HD Series Idlers, Rollers, and RC Series Rollers
HD SERIESREPAIR KIT
BEARING
BEARING
SNAP RING
SEAL
SEAL
STANDOFF
STANDOFF
Page 4
Effective: November 4, 2019
Argonics, Inc. • 520 9th St., Gwinn, MI 49841 • P: 800.991.2746 F: 906.226.9779www.argonics.com/agriculture-rollers
RC RUBBER IDLER ROLLERSRubber idler rollers with steel riveted core
AG-RC401000
DiameterA
WidthB
Axle Dia.Part Number
AG-RC401000 4” 1” 5/8”AG-RC501000 5” 1” 5/8”AG-RC601000 6” 1” 5/8”
5/8”
SH
AFT
Box quantities:• RC401000 come 25 to a box• RC501000 come 16 to a box• RC601000 come 10 to a box
Page 5
Effective: November 4, 2019
Argonics, Inc. • 520 9th St., Gwinn, MI 49841 • P: 800.991.2746 F: 906.226.9779www.argonics.com/agriculture-rollers
RD URETHANE IDLER ROLLERS• Urethane cast onto injection-molded hub• Softer durometer available upon request• Bearing is locked into a nylon core to prevent failure
AG-RD401000-B96
DiameterA
WidthB
Axle Dia.Part Number
AG-RD401000-B96 4” 1” 5/8”AG-RD501000-B96 5” 1” 5/8”AG-RD601000-B96 6” 1” 5/8”
5/8”
SH
AFT
Page 6
Effective: November 4, 2019
Argonics, Inc. • 520 9th St., Gwinn, MI 49841 • P: 800.991.2746 F: 906.226.9779www.argonics.com/agriculture-rollers
SOLID URETHANE SP INDLE ROLLERSMade with Kryptane® polyurethane
AG-RS4010
AG-RS151863
Outer Dia.A
Overall Length A
WidthB
Spindle Length B
Inner Dia.C
Axle Dia.C
Part Number
Part Number
AG-RS4010 4” 1” 1”AG-RS5010 5” 1” 1”
AG-RS1518550 3-1/8” 1-3/4” 1/2”AG-RS151863 3-1/8” 1-3/4” 5/8”AG-RS152550 3-7/8” 2-1/2” 1/2”AG-RS152563 3-7/8” 2-1/2” 5/8”AG-RS153550 4-7/8” 3-1/2” 1/2”AG-RS153563 4-7/8” 3-1/2” 5/8”
ROLL
ERS
SPIN
DLE
S
A
B
C
Section ViewAG-R401000
SPINDLE ROLLERS(AG-R401000)
B
A C
A
SEC
TION
VIE
WA
G-R
S151
8663
STA
ND
OFF
(AG
-RS1
5186
3)
B
A
C
Page 7
Effective: November 4, 2019
Argonics, Inc. • 520 9th St., Gwinn, MI 49841 • P: 800.991.2746 F: 906.226.9779www.argonics.com/agriculture-rollers
HD SERIESREPAIR KIT
BEARING
BEARING
SNAP RING
SEAL
SEAL
STANDOFF
STANDOFF
RC SER IES ROLLERS• With Steel Flanges• High-quality rubber vulcanized on a steel bearing
housing with our patented protection system including custom 6204 bearings and grooved lip sealed standoffs
AG-RC402580
DiameterA
DiameterA
DiameterA
WidthB
WidthB
WidthB
Flange Dia. C
Flange Dia. C
Flange Dia. C
Axle Dia.
Axle Dia.
Axle Dia.
Part Number
Part Number
Part Number
A
B
C
Section ViewAG-RC402580
HEAVY DUTY RUBBER ROLLER
WITH STEEL FLANGE(AG-RC402580)
AG-RC351550-50 3-1/2” 1-1/2” 5” 1/2”AG-RC352500-50 3-1/2” 2-1/2” N/A 1/2”AG-RC352550-50 3-1/2” 2-1/2” 5” 1/2”AG-RC352560-50 3-1/2” 2-1/2” 6” 1/2”AG-RC352580-50 3-1/2” 2-1/2” 8” 1/2”AG-RC401550-50 4” 1-1/2” 5” 1/2”AG-RC402500-50 4” 2-1/2” N/A 1/2”AG-RC402550-50 4” 2-1/2” 5” 1/2”AG-RC402560-50 4” 2-1/2” 6” 1/2”AG-RC402580-50 4” 2-1/2” 8” 1/2”
AG-RC351550 3-1/2” 1-1/2” 5” 5/8”AG-RC352500 3-1/2” 2-1/2” N/A 5/8”AG-RC352550 3-1/2” 2-1/2” 5” 5/8”AG-RC352560 3-1/2” 2-1/2” 6” 5/8”AG-RC352580 3-1/2” 2-1/2” 8” 5/8”AG-RC401550 4” 1-1/2” 5” 5/8”AG-RC402500 4” 2-1/2” N/A 5/8”AG-RC402550 4” 2-1/2” 5” 5/8”AG-RC402560 4” 2-1/2” 6” 5/8”AG-RC402580 4” 2-1/2” 8” 5/8”
AG-RC351550-75 3-1/2” 1-1/2” 5” 3/4”AG-RC352500-75 3-1/2” 2-1/2” N/A 3/4”AG-RC352550-75 3-1/2” 2-1/2” 5” 3/4”AG-RC352560-75 3-1/2” 2-1/2” 6” 3/4”AG-RC352580-75 3-1/2” 2-1/2” 8” 3/4”AG-RC401550-75 4” 1-1/2” 5” 3/4”AG-RC402500-75 4” 2-1/2” N/A 3/4”AG-RC402550-75 4” 2-1/2” 5” 3/4”AG-RC402560-75 4” 2-1/2” 6” 3/4”AG-RC402580-75 4” 2-1/2” 8” 3/4”
1/2”
SH
AFT
5/8”
SH
AFT
3/4”
SH
AFT
B
AC
1/2” Diameter Shaft 5/8” Diameter Shaft 3/4” Diameter ShaftPart # Part # Part #
Roller Width
1-1/2” AG-RK-1500-50 AG-RK-1500 AG-RK-1500-75 2-1/2” AG-RK-2500-50 AG-RK-2500 AG-RK-2500-75 H
D S
ERIE
S RE
PAIR
KIT
S
Repair Kits for HD Series Idlers, Rollers, and RC Series Rollers
Page 8
Effective: November 4, 2019
Argonics, Inc. • 520 9th St., Gwinn, MI 49841 • P: 800.991.2746 F: 906.226.9779www.argonics.com/agriculture-rollers
HD SERIESREPAIR KIT
BEARING
BEARING
SNAP RING
SEAL
SEAL
STANDOFF
STANDOFF
R SER IES HD ROLLERS• Urethane roller with urethane flanges• Slightly tapered face reduces mud build up• Utilizes our patented protection system including custom
6204 bearings and grooved lip sealed standoffs
DiameterA
DiameterA
DiameterA
WidthB
WidthB
WidthB
Flange Dia. C
Flange Dia. C
Flange Dia. C
Axle Dia.
Axle Dia.
Axle Dia.
Part Number
Part Number
Part Number
AG-R282500-50 2-3/4” 2-1/2” N/A 1/2”AG-R282540-50 2-3/4” 2-1/2” 4” 1/2”AG-R351550-50 3-1/2” 1-1/2” 5” 1/2”AG-R352500-50 3-1/2” 2-1/2” N/A 1/2”AG-R352550-50 3-1/2” 2-1/2” 5” 1/2”AG-R352560-50 3-1/2” 2-1/2” 6” 1/2”AG-R402500-50 4” 2-1/2” N/A 1/2”AG-R402550-50 4” 2-1/2” 5” 1/2”AG-R402560-50 4” 2-1/2” 6” 1/2”AG-R502500-50 5” 2-1/2” N/A 1/2”AG-R502580-50 5” 2-1/2” 8” 1/2”
AG-R282500 2-3/4” 2-1/2” N/A 5/8”AG-R282540 2-3/4” 2-1/2” 4” 5/8”AG-R351550 3-1/2” 1-1/2” 5” 5/8”AG-R352500 3-1/2” 2-1/2” N/A 5/8”AG-R352550 3-1/2” 2-1/2” 5” 5/8”AG-R352560 3-1/2” 2-1/2” 6” 5/8”AG-R402500 4” 2-1/2” N/A 5/8”AG-R402550 4” 2-1/2” 5” 5/8”AG-R402560 4” 2-1/2” 6” 5/8”AG-R502500 5” 2-1/2” N/A 5/8”AG-R502580 5” 2-1/2” 8” 5/8”
AG-R282500-75 2-3/4” 2-1/2” N/A 3/4”AG-R282540-75 2-3/4” 2-1/2” 4” 3/4”AG-R351550-75 3-1/2” 1-1/2” 5” 3/4”AG-R352500-75 3-1/2” 2-1/2” N/A 3/4”AG-R352550-75 3-1/2” 2-1/2” 5” 3/4”AG-R352560-75 3-1/2” 2-1/2” 6” 3/4”AG-R402500-75 4” 2-1/2” N/A 3/4”AG-R402550-75 4” 2-1/2” 5” 3/4”AG-R402560-75 4” 2-1/2” 6” 3/4”AG-R502500-75 5” 2-1/2” N/A 3/4”AG-R502580-75 5” 2-1/2” 8” 3/4”
1/2”
SH
AFT
5/8”
SH
AFT
3/4”
SH
AFT
A
B
C
SECTION VIEWAG-R402500
HEAVY DUTYPOLYURETHANE ROLLER
(AG-R402500)AG-R402560
B
AC
1/2” Diameter Shaft 5/8” Diameter Shaft 3/4” Diameter ShaftPart # Part # Part #
Roller Width
1-1/2” AG-RK-1500-50 AG-RK-1500 AG-RK-1500-75 2-1/2” AG-RK-2500-50 AG-RK-2500 AG-RK-2500-75 H
D S
ERIE
S RE
PAIR
KIT
S
Repair Kits for HD Series Idlers, Rollers, and RC Series Rollers
Page 9
Effective: November 4, 2019
Argonics, Inc. • 520 9th St., Gwinn, MI 49841 • P: 800.991.2746 F: 906.226.9779www.argonics.com/agriculture-rollers
NOSE ROLLERS• Tapered design prevents mud build up• Patented protection system including custom
6204 bearings and grooved lip sealed standoffs and watertight plug
Note: Nose Rollers come 4 to a box .
AG-R403300NR AG-R404000NR
DiameterA
DiameterA
DiameterA
WidthB
WidthB
WidthB
Width 2C
Width 2C
Width 2C
Axle Dia.
Axle Dia.
Axle Dia.
Part Number
Part Number
Part Number
AG-R403300NR 4” 4-1/2” 3-1/2” 5/8”AG-R403300NR-75 4” 4-1/2” 3-1/2” 3/4”
AG-R404000NR 4” 4” 3” 5/8”AG-R404000NR-75 4” 4” 3” 3/4”
AG-R402800NR 4” 2-7/8” 1-7/8” 5/8”AG-R402800NR-75 4” 2-7/8” 1-7/8” 3/4”
URE
THA
NE
STEE
LST
EEL
A
D
SECTION VIEWAG-R403300NR
NOSE ROLLERS(AG-R403300NR)
A
B
SECTION VIEWAG-R404000NR
NOSE ROLLER(AG-R404000NR)
A A
C
BC
B
5/8” Diameter Shaft 3/4” Diameter ShaftPart # Part #
Roller Width
4-1/2” AG-RK-4033NR AG-RK-4033NR-75 4” AG-RK-4040NR AG-RK-4040NR-75 2-7/8” AG-RK-4028NR AG-RK-4028NR-75 N
OSE
RO
LLER
S
Kit for Nose Rollers
STANDOFF
SEAL
SEAL
BEARING
SPACER
BEARING
STANDOFF
CAP
NOSE ROLLERREPAIR KIT
(AG-R403300NR)
Page 10
Effective: November 4, 2019
Argonics, Inc. • 520 9th St., Gwinn, MI 49841 • P: 800.991.2746 F: 906.226.9779www.argonics.com/agriculture-rollers
POLYURETHANE SHAKERSAll shakers have two bearings
AG-R7016003S
AG-R65160010S
AG-R6016004S
Points
Points
Points
DiameterA
DiameterA
DiameterA
WidthB
WidthB
WidthB
Axle Dia.
Axle Dia.
Axle Dia.
Part Number
Part Number
Part Number
AG-R7012003S 3 7” 1-1/4” 5/8”AG-R7016003S 3 7” 1-5/8” 5/8”
AG-R6016004S 4 6” 1-5/8” 5/8”
AG-R65160010S 10 6-1/2” 1-5/8” 5/8”
THRE
E PO
INT
FOU
R PO
INT
TEN
PO
INT
A
ROTATIONALDIAMETER
B
SHAKERS(AG-R7016003S)
A
B
ROTATIONALDIAMETER
A
B
POLYURETHANE SHAKERS(AG-R6016004S)
AROTATIONAL
DIAMETER
B
AB
A
B
Page 11
Effective: November 4, 2019
Argonics, Inc. • 520 9th St., Gwinn, MI 49841 • P: 800.991.2746 F: 906.226.9779www.argonics.com/agriculture-rollers
AB
1.25
Section ViewAG-RFACORN12SQ
ACORN ROLLER(AG-RFACORN12SQ)
A B
1.25
Section ViewAG-RFACORN11
ACORN ROLLERSAG-RFACORN11
ACORN ROLLERS• Rubber rollers available with round or square bore• Urethane rollers have a square bore
AG-RFACORN11 AG-RFACORN12SQU
AG-RFACORN150SQU
Shaft Type
Shaft Type
Shaft Type
DiameterA
DiameterA
DiameterA
Hub WidthB
Hub WidthB
Hub WidthB
Shaft Dia.
Shaft Dia.
Shaft Dia.
Part Number
Part Number
Part Number
AG-RFACORN11 ROUND 4” 3” 1-1/4”
AG-RFACORN12SQ SQUARE 4” 3” 1-1/4”
AG-RFACORN12SQU SQUARE 4” 3” 1-1/4”AG-RFACORN150SQU SQUARE 4-1/4” 3-1/4” 1-1/2”
ROU
ND
SQU
ARE
SQU
ARE
A B
Ø1.25
A
C
B
Rubber Acorn Rollers
Urethane Acorn Rollers
A
B
B
1.50
B
SECTION B-B
SHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN INCHES
1:2
AMAT:
DESC.
SIZE
DWG NO.PART NO.DR BY:
Date:
CHKD:
SHRINK: Scale:
GENERAL TOLERANCES0.XXX 0.005ANGLES 0.5
APPR: AG-
RFACORN150SQU 740 S. Pierce Ave Ste 5 Louisville Co. 80027PH: (303) 664-9467FX: (303) 661-3113
This drawing contains confidential and proprietary information which is the exclusive property of Kryptane Systems, a division of Argonics, Inc. Possesion of a copy of this document does not convey any rights contained to information therein. Written permission must be obtained from an authorized representative before copying this document or using it for any purpose.
0.X 0.10.XX 0.02
AB
B
B
1.50
Page 12
Effective: November 4, 2019
Argonics, Inc. • 520 9th St., Gwinn, MI 49841 • P: 800.991.2746 F: 906.226.9779www.argonics.com/agriculture-rollers
(SQUARE)C
A B
6 FINGER ROLLERS(AG-RF0612553)
F INGER ROLLERS• Rubber rollers have straight fingers• Urethane rollers available with straight or swept fingers
AG-RF0612553 AG-RF061253065U
AG-RF0612580U
Fingers
Fingers
Style
Style
Finger Dia.A
Finger Dia.A
Hub WidthB
Hub WidthB
Sq. Shaft Opening C
Sq. Shaft Opening C
Part Number
Part Number
AG-RF0612553 6 STRAIGHT 5-1/2” 3” 1-1/4”AG-RF0615053 6 STRAIGHT 5-1/2” 3” 1-1/2”AG-RF063512553 6 STRAIGHT 5-1/2” 3-1/2” 1-1/4”AG-RF062712553 6 STRAIGHT 5-1/2” 2-3/4” 1-1/4”
AG-RF061253065U 6 SWEPT 6-1/2” 3” 1-1/4”AG-RF061503065U 6 SWEPT 6-1/2” 3” 1-1/2”AG-RF0612553U 6 STRAIGHT 5-5/16” 3” 1-1/4”AG-RF0612580U 6 SWEPT 6-1/2” 1-1/4” 1-1/4”AG-RF0615053U 6 STRAIGHT 5-5/16” 3” 1-1/2”AG-RF0615080U 6 SWEPT 6-1/2” 1-1/4” 1-1/2”AG-RF062712553U 6 STRAIGHT 5-5/16” 2-3/4” 1-1/4”
SIX
FIN
GER
SIX
FIN
GER
A
C
B
Rubber Finger Rollers
Urethane Finger Rollers
A
C
B
C
A B
URETHANE WEIGHT: 0.51 LBS (346g)
SHEET 1 OF 1UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN INCHES
1:2
AMAT:
DESC.
SIZE
DWG NO.PART NO.DR BY:
Date:03/26/12
6 FINGER URETHANE ROLLER 1.5" BORE 75 ESTER
CHKD:
SHRINK: 1.7% Scale:
GENERAL TOLERANCES0.XXX 0.005ANGLES 0.5
APPR:GWC AG-RF0615080
740 S. Pierce Ave Ste 5 Louisville Co. 80027PH: (303) 664-9467FX: (303) 661-3113
This drawing contains confidential and proprietary information which is the exclusive property of Kryptane Systems, a division of Argonics, Inc. Possesion of a copy of this document does not convey any rights contained to information therein. Written permission must be obtained from an authorized representative before copying this document or using it for any purpose.
AG-RF0615080
0.X 0.10.XX 0.02
A B
C
Page 13
Effective: November 4, 2019
Argonics, Inc. • 520 9th St., Gwinn, MI 49841 • P: 800.991.2746 F: 906.226.9779www.argonics.com/agriculture-rollers
HEAVY DUTY CHILLER ROLLERSPolyurethane rollers manufactured specifically for the harsh environment found in chiller/vacuum tubes
AG-R502000 AG-R403300GUIDE
DiameterA
DiameterA
DiameterA
WidthB
WidthB
WidthB
Axle Dia.
Axle Dia.
Axle Dia.
Part Number
Part Number
Part Number
AG-R502000 5” 2” 5/8”AG-R602000 6” 2” 5/8”
AG-R403300GUIDE 4” 3-5/8” 5/8”AG-R403300GUIDE-75 4” 3-5/8” 3/4”
AG-R502000-75 5” 2” 3/4”AG-R602000-75 6” 2” 3/4”
5/8”
SH
AFT
5/8”
SH
AFT
3/4”
SH
AFT
B
A
Heavy Duty Chiller Rollers
Guide Rollers
A B
ITEM PART NUMBER DESCRIPTION QTY.1 AG-R502500.1 5" HEAVY DUTY ROLLER 2-1/2" WIDE 12 BEAR-23004 BEARING 6204 SP 2RS METAL SHIELD 23 RING-27015 1-1/2" SNAP RING 14 STND-27010 STANDOFF 1.375 x 1.515 x 0.625 15 STND-27011 STANDOFF 1.375 x 0.663 x 0.625 16 SEAL-27013 SEAL - 1.850 x 1.125 x .312 17 SEAL-27014 SEAL - 1.625 x 1.125 x .312 1
SHEET 1 OF 2UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN INCHES
2:3
AMAT:
DESC.
SIZE
DWG NO.PART NO.DR BY:
Date:09/08/08
5" HEAVY DUTY URETHANE ROLLER 2-1/2" WIDE W/ NO FLANGE, 5/8" AXLE VARIES
CHKD:
SHRINK: Scale:
GENERAL TOLERANCES0.XXX 0.005ANGLES 0.5
APPR:JMS AG-R502500
740 S. Pierce Ave Ste 5 Louisville Co. 80027PH: (303) 664-9467FX: (303) 661-3113
This drawing contains confidential and proprietary information which is the exclusive property of Kryptane Systems, a division of Argonics, Inc. Possesion of a copy of this document does not convey any rights contained to information therein. Written permission must be obtained from an authorized representative before copying this document or using it for any purpose.
AG-R502500
0.X 0.10.XX 0.02
AC
Table of ContentsIdler RollersR Series Heavy Duty RollersRC Rubber Idler RollersRD Urethane Idler RollersUrethane Spindle RollersRC Series RollersR Series HD RollersNose RollersPolyurethane ShakersAcorn RollersFinger RollersHeavy Duty Chiller Rollers