Manual de instalación y uso de la lavadoraManuel d’installation et d’utilisation du lave-linge

Manual de instalação e utilização da máquina de lavar roupaWashing machine installation and operation manual

26

27

28

32

42

44

47

AVERTISSEMENTS

SPÉCIFICATIONS

INSTALLATION ET MONTAGE

UTILISATION DE L’APPAREILET CONSEILS PRATIQUES

MAINTENANCEET ENTRETIEN DE L’APPAREIL

SÉCURITÉET RÉSOLUTION DE PROBLÈMES

AVERTISSEMENTS SURL’ENVIRONNEMENT

index

4

5

6

10

20

22

25

ADVERTENCIAS

ESPECIFICACIONES

INSTALACIÓN Y MONTAJE

USO DEL APARATOY CONSEJOS PRÁCTICOS

MANTENIMIENTOY LIMPIEZA DEL APARATO

SEGURIDADY SOLUCIÓN DE PROBLEMAS

ADVERTENCIAS SOBREEL MEDIO AMBIENTE

lavadoraíndice

lave-linge

70

71

72

76

86

88

91

WARNINGS

SPECIFICATIONS

INSTALLATION AND ASSEMBLY

USING THE APPLIANCE.PRACTICAL TIPS

MAINTENANCEAND CLEANING

SAFETYAND TROUBLESHOOTING

ENVIRONMENTALWARNINGS

washing machinecontents

48

49

50

54

64

66

69

ADVERTÊNCIAS

QUADRO TÉCNICO

INSTALAÇÃO E MONTAGEM

UTILIZAÇÃO DO APARELHOE CONSELHOS PRÁTICOS

MANUTENÇÃOE LIMPEZA DO APARELHO

SEGURANÇAE SOLUÇÃO DE PROBLEMAS

ADVERTÊNCIAS SOBREO MEIO AMBIENTE

máquina de lavar roupaíndice

70

warnings

This washing machine comes with amanual that includes operating, maintenanceand installation instructions. Please read allthe instructions before using the washingmachine.

Do not wash items that have previouslybeen cleaned, washed, soaked or treatedwith petrol, solvents for dry cleaning, otherinflammable substances or explosives, asthey produce fumes that could catch fire orexplode.

Do not add petrol, solvents for dry cleaningor other inflammable or explosive substancesto the wash water as they produce fumesthat could catch fire or explode.

Do not repair or replace any part of thewashing machine or try to carry out any typeof servicing unless it is recommended in themaintenance instructions in the manual.

Do not climb onto the machine or standon the open hatch door.

Do NOT use an extension lead or adaptorto connect your washing machine to themains supply.

The machine should only be used for thepurpose it is designed for.

Follow the washing instructionsrecommended by the manufacturer of thegarment to be washed.

Do not turn your washing machine on untilyou are sure that:

• It has been installed in accordance withthe installation instructions.

• All the water, drainage, mains electricity andearth connections meet the local regulationsand/or other applicable regulations.

To avoid the risk of fire, electrical shocks, injury or damage when using your washingmachine, please take the following precautions:

thanks for placing your trust in us

Washing in less time.• The wash programmes do not last as

long giving you more free time.

Time delay.• To take advantage of cheap electricity

rates.

WITH INNOVATION ALWAYS IN MIND

LCD screens.• Which allows you to have constant

information about the wash programmeand its duration.

Detergent dispenser designed to offermaximum convenience.

• Easy to remove for cleaning.• Possibility of using liquid detergent.

Our new range of washing machines has been designed to make life more convenient for you:

WITH YOUR CONVENIENCE ALWAYS IN MIND

Large hatch.Maximum opening.

• Designed higher than the normal axis andwith the drum tilted to achieve maximumergonomics.

• Its maximum opening makes it mucheasier to put clothes in.

Hatch opening button.• Opens instantly at the simple press of a

button (Depending on model).

Easy-access filter.• And simple maintenance.

WITH SAVINGS ALWAYS IN MIND

8 kg capacity.• Which allows you to do less washes and

make savings.

71

washing machine

Water inlet hose

specifications

Drain hose

Work top

Powercord

ControlpanelDetergent

dispenser

Stainlesssteeldrum

Filter

Kickplate

Hatch

Rear plugs Drain pipe bender

Levellingfeet

ACCESSORIES LOCATEDINSIDE THE DRUM

72

washing machine

a There are 3 blocking screws on the backof the washing machine.

b To loose and completely remove the 3screws together with the metal washerand the black rubber and plastic tubesthat make up the blocking system.

c Fit the 3 plastic plugs supplied in theholes you removed the screws from.

installation and assembly

Do not throw the blocking screws away.You may need to move the washingmachine at a later date.

Imp

ort

ant

a Remove the base, corner protectors andtop cover.

1 UNPACKING ANDUNBLOCKING THEWASHING MACHINE

UNBLOCKING

UNPACKING

a

c

DRAINAGECONNECTION

CONNECTION TO THEMAINS WATER SUPPLY

73

CONNECTION TO THE MAINS WATER SUPPLY ANDDRAINAGE

The water supply hose is inside the drum:

a Connect the bent end of the hose to thethreaded inlet of the electrovalve locatedat the rear of the washing machine.

b Connect the other end of the hose to thewater intake. Then securely tighten theconnection nut.

installation and assembly

It is important that the drain hose bendis correctly fastened to the outlet, toprevent any risk of it becomingdetached and causing flooding.

If your washing machine has a hotwater intake, connect the hose withthe red threaded end to the hot watertap, and to the electrovalve with thered filter.

The washing machine must beconnected to the mains water supply,using the new supply hoses suppliedwith the appliance. Do not use watersupply hoses that have been usedbefore. For your washing machine towork properly, the mains waterpressure must be between 0.05 and1MPa (0.05 and 10 Kgr/cm2).

a It is recommended that you have a fixeddrainage outlet 50 tom 70 cm from thefloor.Avoid the drain hose being too tight,kinked or restricted. Use the bendsupplied.

2

Imp

ort

ant

a

Imp

ort

ant

74

LEVELLING THE WASHING MACHINE AND CONNECTINGIT TO THE MAINS ELECTRICITY SUPPLY

installation and assembly3

Consult the specifications plate located on thehatch door of the washing machine beforemaking the electrical connections. Ensure thatthe voltage reaching the plug is the same asthat on the plate.Do not remove the specifications plate. Theinformation on it is important.

ELECTRICAL CONNECTION

LEVELLING

It is very important to correctly earth thewashing machine.

The electrical installation, plug, socket,fuses or automatic switch and countermust be correctly dimensioned for themaximum power indicated on thespecifications plate.

Do not plug the washing machine plug intothe socket with wet or damp hands.

To remove the power cord, pull on the bodyof the plug.

If the power cord is damaged, it must bereplaced by a cord or special unit providedby either the manufacturer or your after-sales service.

With built-in washing machines, the plugmust be accessible after installation.

a First of all, we recommend thatyou fix and level the rear feet. Whenthey are properly fixed, secure themetal locknut tightly to the toppart.

b Put the washing machine into itsniche. Dampen the floor to helpyou move the machine into its finalposition.

c Finally level and secure the frontfeet in the same way as youlevelled the rear feet.

a

b c

Imp

ort

ant

When your washing machine has beencorrectly installed, we recommend that youpre-clean the machine.

This is to check that the installation, theconnections and the drainage are all correct,and to thoroughly clean the inside of thewashing machine before any washprogrammes are run (see the operatinginstructions on the following pages).

a Press ON/OFF button.

b Select the normal programme at 60ºC.

c Press the start/pause button.

75

PRE-CLEANING4

PRE-CLEANING

c

a b

PREPARATION

76

washing machine

a Sort the clothes according to fabricand how they are made.We recommend using the delicateprogrammes for sensitive fabrics. Thereis a special wool programme forwoollens.

b Sort clothes according to how soiledthey are.•Wash lightly soiled garments using ashort programme.

•Use a programme without prewash formedium-soiled garments.

•Wash heavily soiled garments using along programme with prewash.

c Sort your clothes according tocolour.Wash whites and colouredsseparately.

using the appliance and practical tips

Importante

Make surebeforehandthat yourwoollens canbe machine-washed.

Before placing the clothes in the drum,make sure all the pockets are empty.

Any small objects may block the drainpump.

PrewashWash

Wash

1 PREPARINGGARMENTS FORWASHING

30

60

90

40

Cold

Imp

ort

ant

We recommend loading the washingmachine to its full capacity. This meanssavings on water and energy.Whenever possible, we recommendthat you wash garments of differentsizes within the same washprogramme. This improves the washingaction and also aids the correctdistribution of the garments in the drumwhen spin-drying, and the washingmachine will therefore be quieter.It is a good idea to put small garmentsin a wash bag.

SORTING THE CLOTHES

Imp

ort

ant

77

2 USING DETERGENT AND ADDITIVES

eco-note

using the appliance and practical tips

Remember that concentrated detergentsexist which are more environment- andnature-friendly.

The use of more detergent thannecessary will not improve yourwashing results, and apart from costing you

money it will have a negative effect on the preservation of the environment.

We therefore recommend you followthe detergent manufacturer’sinstructions.

WASH PREWASHFABRIC SOFTENER

a

c

a Your washing machine’s detergentdispenser has three compartments.

b If you are going to use liquid detergentyou must close the wash compartmentflap. Take the blue tab protruding fromthe bottom of the compartment between2 fingers and pull outwards as far as itwill go. Release the flap and it will remainin the vertical position and prevent theliquid detergent from getting out. It mustbe open for powdered detergent. Put itin the horizontal position, pressing thetop tab with your finger and pushing itback as far as it will go.

c Put the detergent, either liquid or powder,or additive into the detergent dispenserbefore starting the wash programme.

The liquid level must never be higherthan the MAX mark printed on thedispenser wall.

Remember that the amount of detergent tobe used will always depend on:

The amount of clothes to be washed. How heavily the clothes are soiled. The water hardness (information about

water hardness is available from the relevantlocal authorities).

We recommend the use of adecalcifying product if the waterhardness is high in your area.

Impo

rtant

Impo

rtant

b

DETERGENTAND ADDITIVES

78

3 SELECTING THE WASHPROGRAMME

using the appliance and practical tips

To select a wash programme, proceed asfollows:

a Switch the washing machine on bypressing ON / OFF.

b Activate the programme selector bypressing it to release it (depending onthe model).

c Select the wash programme by turningthe programme selector (see programmetable).

a b

c

programmeselector

start/pausebutton

additionalfunctionbutton

timedelaybutton

spin andanti-creasebutton

ON/OFFbutton

additionalfunctionbutton

timedelaybutton

spinbutton

screen

screen

door openingbutton

79

using the appliance and practical tips

When you select the programme, the followinginformation will be displayed:

1 Wash programme phases:PrewashWashRinseSpin-drying

2. No. of revolutions

3. Programme No. (for a few seconds)and then its duration.

Additional functions

Easy iron Extra rinse Intensive wash

There are four types of programmes:

Normal programmesDelicate programmesWool programmesAuxiliary programmes

We recommend you choose a washprogramme without prewash wheneverpossible. This will save you money and helpprotect the environment.

eco-note

1

2 3

1

2 3

Normal Delicate Wool Auxiliary

PROGRAMMES

Normal coldQuick 30ºCNormal 30ºCNormal 40ºCNormal 60ºCNormal 90ºCPrewash 60ºC

Delicate coldDelicate 30ºCDelicate 40ºCDelicate 60ºC

Wool coldWool 35ºC

RinsesSpin-dryingDrain/End

1234567

891011

1213

141516

Cotton/Linendelicate coloursvery light soil

Cotton/Linenwhites/coloursvery light soil

Cotton/Linendelicate colourslight soil

Cotton/Linenfast colourslight soil

Cotton/Linenfast coloursmedium soil

Cotton/Linenwhitesheavy soil

Cotton/Linenwhites/fast coloursheavy soil

Synthetic/mixcotton delicate coloursvery light soil

Synthetic/mix cottondelicate colourslight soil

Synthetic/mix cottondelicate coloursmedium soil

Synthetic/mix cottonwhite/fast coloursmedium soil

Wool/wool mixwhite/colourvery light soil

Wool/wool mixwhite/colourlight soil

Cotton/cotton mixSynthetic/DelicateWool/wool mix

Cotton/cotton mixSynthetic/DelicateWool/wool mix

Cotton/cotton mixSynthetic/DelicateWool/wool mix

YES NO YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YESNO NO

NO

Cold

Cold

WOOL Cold

WOOL 35

_

_

_

80(*) Programme for wash and energy consumption assessment in

accordance with standard EN60456, press intensive wash button.

1

2

3

4

5 (*)

6

7

8

9

10

11

12

13

14

15

16

Normal cold

Quick 30ºC

Normal 30ºc

Normal 40ºC

Normal 60ºC

Normal 90ºC

Prewash 60ºC

Delicate cold

Delicate 30ºC

Delicate 40ºC

Delicate 60ºC

Wool cold

Wool 35ºC

Rinses

Spin-drying

Drain /End

Nor

mal

pro

gram

mes

Del

icat

e p

rogr

amm

esW

ool p

rog.

Aux

iliar

y p

rog.

30

30

40

60

90

60

40

60

40

3030

YES NO

YES NO

YES NO

Extra

rinse

Inten

sive

wash

Easy

-iron

Spin s

peed

selec

tion

No sp

in

Anti-c

reaseRecommended

temperatureProgramme Fabric typeMax.

load ofclothes (Kg)

Possible option buttons

0,10/59

0,25/30

0,30/59

0,60/59

1,52/59

2,20/64

1,50/64

0,10/45

0,20/45

0,40/45

1,00/45

0,05/55

0,45/55

0,05/25

0,05/0

0,00/0

50

30

52

57

80

110

100

50

50

55

70

30

40

23

10

2

Normal wash, rinses,automatic additive absorptionif desired and long final spin

SHORT wash, rinses,automatic additive absorptionif desired and final long spin

Normal wash, rinses,automatic additiveabsorption if desiredand long final spin

Prewash, normal wash, rinses,automatic additive absorptionif desired and long final spin

Delicate wash, rinses,automatic additiveabsorption if desiredand gentle final spin

WOOL wash, rinses,automatic additiveabsorption if desiredand gentle final spin

Rinses, automaticadditive absorption ifdesired and long final spin

Drain and final long spin

Drain and end of programme.Takes programme tofinal position

_

_

81

NOTE: the KWh and litre consumptions and programme durations may vary dependingon the type and amount of clothes, mains water pressure, etc.

8

2

8

8

8

8

8

3,5

3,5

3,5

3,5

2

2

8

8

8

Anti-c

rease

Washproduct

compartment

Programmedescription

TURBO TIME PLUS

Totalconsumption

KWh/litres

Approx.duration(minutes)

Max.load of

clothes (Kg)

82

4 SPIN SPEED SELECTIONusing the appliance and practical tips

SPIN DRYING

The wash options must always be selected afterchoosing the wash programme. Any programmechange during selection cancels the previouslyselected options.

a Spin speed selection and anti-creasebutton.The programme selected is associatedwith certain spin revolutions, as shownon the display.

b It can be modified by pressing the spindrying button and the number ofrevolutions will be reduced by 100revolutions at a time to 400.

c No spinPress the spin button again to get to theno spin option. A programme without afinal spin. It is used to prevent creasingwhen washing special fabrics.

d Anti-crease optionThe wash programme stops on the lastrinse, with the clothes left in water.When the function is deactivated, thewashing machine continues theprogramme, draining and spin-drying.It is used, for example, when you are notat home and want to delay the spin-drying until you get home, to prevent theclothes creasing after spin-drying andbeing left in the drum to be removed.

ba

a Depending on the model, you can open thehatch by pressing the hatch opening button.

b If you cannot open the hatch due to abreakdown or a power cut, proceed as follows:remove the dispenser by pulling the handleoutwards and pressing the blue lever with yourfinger. A button with a slot will appear on theright. Turn the button to the left with the aid ofa coin and the hatch will open.

If your model of Washing machine does nothave remote opening you have to await about2 minutes from the end of the programmebefore being able to open the hatch.

a

c d

b

OPENINGTHE HATCH

83

Time delay selection buttonA delay of up to 24 hours can be selected.The delay must be selected after choosing thewash programme.To select the delay time, press the clock button.Each time the button is pressed the start willbe put back 1 hour.

Cancelling the delay

To cancel the delay you have to press theclock button successively. The delay will becancelled when 24 hours have been reachedand the button is pressed once more. If theprogramme is changed the delay is alsocancelled.

5 TIME DELAY SECTION ANDADDITIONAL FUNCTIONS

using the appliance

Additional function selection button dependingon programmes.

There are 3 options: easy-iron, extra rinseand intensive wash.Press the select button to display theoption required.By pressing the button several times youcan choose between several combinationsof one, two and up to three additionalfunctions at the same time depending onthe programme selected.

Button: Easy-iron ( )This option prevents garments fromcreasing by means of carrying out aspecial programme with special turns tofluff out the garments after spin-dryingand make them easier to iron.

Button: Extra rinse ( )Increases the level of the final rinseobtained in the clothes; suitable for largeloads and garments belonging to peoplewith sensitive skin. Increases waterconsumption!

Button: Intensive wash ( )This option, specially recommended forheavily soiled, stained clothes, achievesbetter results by extending the normalwash cycle.

TIME DELAY

ADDITIONAL FUNCTIONS

If during the additional function selection, theprogramme is changed or the ON/OFF buttonis pressed, all the functions selected until thenare cancelled.

Imp

ort

ant

Select

Select

Select

84

Start/pause buttona To start up the washing machine you

have to press the start / pause button.The display will constantly show theminutes left until the wash is over.

6 STARTING UP ANDBLOCK FUNCTION SELECTION

using the appliance

STARTING UP

Block function selectionThe various buttons can be blocked to preventthem from being pressed and affecting theselected wash programme and options. Thiscan be used to stop children playing with thebuttons, etc.The block function should be activated afterthe wash programme has been selectedtogether with all its options.

Activating the block functiona The block function is activated by

pressing the start/pause button andholding it down for at least 3 seconds.The display will show if it is activated.

Deactivating the block functionb The block function is cancelled when

the wash programme comes to an end.If you want to deactivate the blockfunction before the end of theprogramme, you have to hold the startbutton down again for at least 3 seconds.After 3 seconds, the block functionindicator will disappear from the display,and it will go into pause status.The ON/OFF button does not cancelthe block function.

BLOCK FUNCTIONa

b

a

85

When the programme is running you can seewhich phase it is at on the display, as well ashow long there is to the end of the programme.

The active phases will appear successively atthe top of the display as the programmeprogresses. The time remaining until the end ofthe programme will also appear on the display.It updates at regular intervals, but not minute byminute.

Any option button can be selected provided thewash phase in which it takes effect has not beenpassed and when the programme accepts theoption.

Pressing the delay button during the wash hasno effect on the washing machine.

Pressing the start/pause button during the washactivates the PAUSE function.

7 WASH PROGRAMME PHASES AND POWER CUTSusing the appliance

If there is a power cut, when the electricitycomes back on the washing machine willcontinue to run from where it left off (it hasseveral hours of memory). The same will happenif the ON/OFF button is pressed.

warnings Level the washing machine by adjusting the

feet to reduce the noise caused by spin-drying. Try and wash clothes of different sizes in the

same wash programme to favour the distributionof the clothes inside the drum during spin-drying.

PROGRAMMEPHASES

All the models have a safety system for spin-dryingthat prevents spin-drying from being carried out if thedistribution of the clothes inside the drum is tooconcentrated. This prevents the appliance fromvibrating too much.If you find that the clothes are not properly wrung out,try spin-drying them again after having distributed theclothes more evenly in the drum.

Impo

rtan

tIf you change the wash programme duringthe wash using the selector, the PAUSEfunction is activated and the programme iscancelled.

If you need to add or remove a garment,press the start/pause button and make surethat the water level is not above the dooroverflow level and that the temperatureinside is not high. Press the start/pausebutton again to restart the wash from thesame cycle phase it had stopped at.

POWER CUTS

POWER CUTS

86

washing machinemaintenance and cleaning

After each wash, leave the door openfor a while to allow the air to circulatefreely inside the machine.

From time to time, depending on thehardness of your water, it isrecommendable to run a full wash cycleusing a decalcifying product.This will extend the life of your washingmachine.

MAINTENANCE

The washing machine should bedisconnected from the mains electricitysupply before any cleaning ormaintenance is carried out.

A dirty or incorrectly fitted siphonwill prevent the additives frombeing taken in and leave waterinside the compartment at the endof the wash.Im

port

ant

1 CLEANING THE DETERGENT DISPENSER

Impo

rtan

t

Clean the detergent dispenser wheneverthere is any washing product residue leftinside.

a Pull outwards on the handle andpress the blue lever with your fingerto remove the detergent dispensercompletely.Use warm water and a brush toclean the compartments.

b Also clean the additivecompartment siphon. To removeit, pull the flap at the back out.Once it has been cleaned, put itback pressing down to make surethat it fits right in. Put the dispenserback into the washing machine.

b

a

Clean the accessible filter if the drain pumpis blocked by any foreign objects.

a Open the kickplate cover with the aid ofa coin and by pulling gently on it.

b Place a container under the drain pipeto collect any water that comes out ofit.Remove the drain pipe, place it on thecontainer and open the cover. Water willstart to come out.

c When all the water has come out of themachine, turn the filter several times untilit can be completely removed, by pullinggently on it.

d Remove the objects or fluff caught in thefilter or the drain pump.Put the filter, the drain pipe and coverback in place again.

87

CLEANING THE ACCESSIBLE FILTER ANDTHE OUTSIDE

maintenance and cleaning

We recommend that you clean the filterat least once a year.To avoid burns, do not carry out thisoperation when the wash water is at atemperature of over 30ºC.

2

Impo

rtan

t

LIMPIEZA EXTERIOR

CLEANING THE FILTER

The outside of the washing machine shouldbe cleaned with warm soapy water or a gentlecleaning agent. Do not use abrasive cleaningproducts or solvents.It should then be thoroughly dried with a softcloth.

When there have been spillages ofdetergent or additives from thedispenser onto the washing machinecabinet, clean them up right away asthey are corrosive.Im

port

ant

a

CLEANING THE OUTSIDE

b

c

d

washing machinesafety and troubleshooting

88

Imp

ort

ant

If you detect any problems withyour washing machine, you willprobably be able to rectify themyourself by consulting the followinginstructions.

If this is not the case, unplug theappliance and contact theTECHNICAL ASSISTANCESERVICE.

PROBLEMS

Never open up theappliance. There is no fuseor similar component insidethat can be replaced by theuser.

Why won’t the washingmachine start?

Why is the washing machinevibrating or making toomuch noise?

This may be due to the following:

The washing machine is not plugged into the mains orthere is no voltage in the mains supply.

The Start/Pause button has not been pressed.

When the washing machine door is not properly closed,F04 appears on the display.Check that the door has been closed properly.

This may be due to the following:

The blocking and transport screws have not beenremoved.

The washing machine has not been correctly levelled.

During spin-drying the motor makes a “whistling” noisewhich is normal due to the mechanical action of themotor itself.

Indicator

FO1

FO2

CO3

FO4

FO5.....

F10

Problems

No water coming in

Does not drain or spin-dry

Does not spin-dry

Does not start

Call the Technical Assistance Service

safety and troubleshooting

89

Why doesn’t the washingmachine take in water?

Why doesn’t the washingmachine drain or spin dry?

Why doesn’t the machinespin-dry?

Why can’t I see any water inthe drum during the wash?

When there is no water coming in F01 will appear onthe display.

Indicator F01, no water coming in, this may be due toa cut in the water supply, a tap turned off or a blockedwater inlet filter.

The possible solutions are as follows: wait for the watersupply to be reconnected, turn on the tap, or removethe water inlet hose and clean the filter.

When F02 appears on the display.

The reasons for the F02 indicator may be the following:washing machine drain pump blocked, building drainagepipes blocked, or incorrect pump electrical connection.

Solution: if the pump is blocked, gain access to it asdescribed in section 2, maintaining and cleaning theappliance.

When it does not spin-dry, C03 appears on the display.

This may be due to an uneven distribution of clothesin the drum and may cause an excessive level ofvibrations.

The solution is to select a spin-drying programme.

This is due to the fact that the washing machine is providedwith a system which is able to adapt to the load and typeof fabrics, adjusting the levels of water and energy used,in order to preserve the environment.So, although the water level you can see through the hatchmay look low, there is no cause for concern as washingand rinsing efficiency will still be optimum.

90

safety and troubleshooting

Why is there still some waterin the dispenser?

Why can’t I open the hatchimmediately after the washhas finished?

Other indications

This may be because the dispenser needs cleaning. Thissimple operation is described in Maintaining and cleaningthe appliance.

1. Cleaning the detergent dispenser.

Washing machines today are provided with safety systemsfor users. One of them is that the washing machine cannotbe opened until it is certain that the drum is quite still. Thisis why the hatch cannot be opened for 2 minutes.

The washing machine can detect other indications.When this happens a number of other indicators appearon the display: F05, F06..., F10.

This information may be due to very different reasons.

Check if the problem is repeated and in this case callthe AUTHORISED SERVICE CENTRE.

91

washing machineenvironmental warnings

When your appliance is of no further use, it shouldnot be disposed of together with general domesticwaste.

It can be taken, free of charge, to a specific wastecollection centre, run by your local authority, ordealers who provide this service.

Disposing of waste domestic appliances separatelymeans avoiding possible negative consequencesfor the environment and health, derived fromincorrect disposal. This will enable the materialsin them to be treated and recycled, obtainingimportant savings in energy and resources.

To highlight the obligation of collaborating withselective waste collection, the product is markedwith a symbol to warn against using traditionalcontainers for disposing of the appliance.

For further information, contactyour local authority or the shopwhere you purchased the product.

INFORMATION FOR THE CORRECT DISPOSAL OF WASTE ELECTRICAL ANDELECTRONIC APPLIANCES

eco-note

Fagor Electrodomésticos, S.Coop.Apartado 49Tel. (943) 71 91 00 / 01Fax (943) 79 68 81Bº San Andrés, 1820500 MONDRAGÓN (Guipúzcoa)www.fagor.come-mail: info@fagor.com

03/06 LJ6A028G9/1