LIGHTING2018
01lighting 2018
Nous transformons le plâtre en lumière.Engineering plaster, forming light.
Issu des carrières du bassin parisien, le plâtre qu’utilise Atelier Sedap est travaillé, façonné et moulé sur les bords de l’océan Atlantique.
Plâtre de Paris + Fabrication Locale + Capital Humain National = une Production 100% Française.
Extracted from quarries near Paris, the plaster that Atelier Sedap uses is worked, shaped and molded near the Atlantic coast.
Made in France, from plaster of Paris by French employees, our products are 100% French-made.
La recherche et la créativité d’Atelier Sedap ont permis de faire évoluer les utilisations du plâtre et de multiplier ses applications dans l’éclairage.Le choix du matériau plâtre s’inscrit, aujourd’hui plus que jamais, dans une démarche volontaire de production respectueuse de l’environnement.En effet, le plâtre se distingue depuis des millénaires pour ses propriétés de régulation hygrométrique, de protection contre les incendies, et de performances d’isolation acoustique. Il est reconnu aujourd’hui pour son innocuité pour l’environnement et la santé.
Pour la santé parce que le plâtre est confectionné à partir de gypse (roche minérale) et d’eau, il ne requiert pas l’utilisation de colles, de solvants ou autres produits nocifs pour l’homme.
Pour l’environnement parce qu’une politique environnementale très sérieuse régit l’avant, le pendant et l’après de l’exploitation. Le plâtre utilisé par Atelier Sedap provient d’une exploitation française respectueuse de toutes les normes environnementales. D’autre part, la cuisson du plâtre se fait à basse température, ce qui réduit au maximum le dégagement de CO2. Enfin, les déchets de fabrication et du chantier sont recyclés.
Research and creativity have enabled Atelier Sedap to develop new uses for plaster and innovative lighting applications.Today more than ever, plaster’s environment-friendly qualities make it the preferred choice.Although plaster’s capacity to regulate humidity, withstand fire and absorb noise have been recognized for thousands of years, it is increasingly appreciated for being environmentally safe and non-toxic.
Plaster is non-toxic because it is made from gypsum, a mineral, and water and contains no glues, solvents or other substances harmful to man.
Plaster also has very little impact on the environment, since the extraction of gypsum and the production and disposal of plaster are subject to very strict environmental regulations. The plaster we use at Atelier Sedap is obtained from a French quarry that complies with all environmental standards. Furthermore, the manufacturing of plaster produces very little carbon emissions since it is cooked at a low temperature. Lastly, production and construction waste are recycled.
02 lighting 2018
03lighting 2018
04 lighting 2018
08 - 65
INDEX
SYSTÈMES
68 - 103 ENCASTRÉS & SEMI-ENCASTRÉS
106 - 165 APPLIQUES
168 - 177 APPLIQUES TABLEAUX
180 - 207 SUSPENSIONS
210 - 225 PLAFONNIERS
SYSTEMS SYSTEME SISTEMAS SISTEMI
RECESSED & SEMI-RECESSED LAMPS EINBAULEUCHTEN & HALBEINBAULEUCHTEN EMPOTRADOS & SEMI-EMPOTRADOS INCASSI & SEMI-INCASSI
WALL LAMPS WANDLEUCHTEN APLIQUES APPLIQUES
LIGHTING SCULPTURES TABELLEN CUADROS PANELLI
PENDANTS HÄNGELEUCHTEN SUSPENSIONES SOSPENSIONI
CEILING LAMPS DECKENLEUCHTEN PLAFONES PLAFONIERE
05lighting 2018
INDEX
06 lighting 2018
08 - 65 SYSTÈMESSYSTEMS SYSTEME SISTEMAS SISTEMI
U-BLADE 120V-BLADE 170
BLADEMINI BLADE
MICRO BLADE 35
MICRO CORNICHE
MICRO BLADE PLINTHE
U-BLADE 135 U-BLADE 120 X 120
MICRO BLADE 50
MICRO BLADE 63
MICRO BLADE ANGLE MICRO BLADE CURTAIN
MINI X-BLADEX-BLADE MICRO X-BLADE
16-19
26-27
28-29
30-35
36-37
08-15
MICRO BLADE 25
MICRO BLADE CIRCLE
MICRO BLADE DOOBLE
38-41
42-51
CORNICHES
COUPOLES COUPOLES STYLE
SYSTÈMES ENCASTRÉS/RECESSED SYSTEMS - COUPOLES & CIRCLE
SYSTÈMES ENCASTRÉS/RECESSED SYSTEMS - PROFILS
MICRO BLADE CROSSMICRO BLADE TURN
SYSTÈME NON ENCASTRÉ/SURFACE MOUNTED SYSTEMS - PROFILS
ECO BLADE
52-55
56-59
60-65
CORNICHES AUTO-ÉCLAIRANTES
MICRO BLADE CADRE
07lighting 2018
T-BLADE
MICRO BLADE SEGMENTS
SIMPLE BLADE NANO BLADE
24-25
Gamme de coupoles lisses encastrées en plâtre HD pour éclairage LEDs avec alimentation séparée. Range of high-strength plaster simple domes, for recessed LED lighting with separate power supply.
792-794 / COUPOLE 75 & 100
901 COUPOLE OVALE Design Atelier Sedap
901_32
11 KG
2 700 °K / 101,5 W / 9 633 lm / IRC ≥ 90
901_26 3 100 °K / 75 W / 7 800 lm
5199 Dissipateur de chaleur en aluminium cintré pour 901_00 / Heatsink in aluminium for 901_00
901_27 RVB-RGB / 56 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
901_31 3 000 °K / 101,5W / 9 633 lm / IRC ≥ 90901_29 2 800 °K / 75 W / 7 800 lm
901_00 Coupole sans équipement électrique / Dome without LED - (LEDs 260 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
08 lighting 2018
COUPOLESdesign Atelier Sedap
1700
990
130
1500x800
794 / COUPOLE 100
595
85
Ø 420
790 COUPOLE 42 Design Atelier Sedap
790_32
5 KG
2 700 °K / 41,6 W / 3 952 lm / IRC ≥ 90
790_26 3 100 °K / 31 W / 3 200 lm
5195 Dissipateur de chaleur en aluminium cintré pour 790_00 / Heatsink in aluminium for 790_00
790_27 RVB-RGB / 24 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
790_31 3 000 °K / 41,6 W / 3 952 lm / IRC ≥ 90790_29 2 800 °K / 31 W / 3 200 lm
790_00 Coupole sans équipement électrique / Dome without LED - (LEDs 160 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
Existe aussi en plafonnier (réf. 3160)
COUPOLES
925150
Ø 750
1175
200
Ø 1000
1675
260
Ø 1500
792 COUPOLE 75 Design Atelier Sedap
792_32
11 KG
2 700 °K / 67,6 W / 6 422 lm / IRC ≥ 90
792_26 3 100 °K / 50 W / 5 200 lm
5196 Dissipateur de chaleur en aluminium cintré pour 792_00 / Heatsink in aluminium for 792_00
792_27 RVB-RGB / 39 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
792_31 3 000 °K / 67,6 W / 6 422 lm / IRC ≥ 90792_29 2 800 °K / 50 W / 5 200 lm
792_00 Coupole sans équipement électrique / Dome without LED - (LEDs 260 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
794 COUPOLE 100 Design Atelier Sedap
794_32
18 KG
2 700 °K / 88,4 W / 8 400 lm / IRC ≥ 90
794_26 3 100 °K / 65 W / 6 800 lm
5190.2 Dissipateur de chaleur en aluminium cintré pour 794_00 / Heatsink in aluminium for 794_00
794_27 RVB-RGB / 51 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
794_31 3 000 °K / 88,4 W / 8 400 lm / IRC ≥ 90794_29 2 800 °K / 65 W / 6 800 lm
794_00 Coupole sans équipement électrique / Dome without LED - (LEDs 340 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
796 COUPOLE 150 Design Atelier Sedap
796_32
40 KG
2 700 °K / 129 W / 12 226 lm / IRC ≥ 90
796_26 3 100 °K / 95 W / 9 900 lm
5191.3 Dissipateur de chaleur en aluminium cintré pour 796_00 / Heatsink in aluminium for 796_00
796_27 RVB-RGB / 72 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
796_31 3 000 °K / 129 W / 12 226 lm / IRC ≥ 90796_29 2 800 °K / 95 W / 9 900 lm
796_00 Coupole sans équipement électrique / Dome without LED - (LEDs 495 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
Existe aussi en plafonnier (réf. 3162)
Existe aussi en plafonnier (réf. 3164)
790 / COUPOLE 42792 / COUPOLE 75
09lighting 2018
901 / COUPOLE OVALE
COUPOLES
FINITION FEUILLE D’OR, D’ARGENT OU DE CUIVRE
10 lighting 2018
COUPOLES
595
85
Ø 420
925
150
Ø 750
797 / COUPOLE ORIGAMI 799 / COUPOLE GOUTTE 42
797 COUPOLE ORIGAMI Design Atelier Sedap
797_32
Ø 75 cm
2 700 °K / 67,6 W / 6 422 lm / IRC ≥ 90
797_26 3 100 °K / 50 W / 5 200 lm
5196 Dissipateur de chaleur en aluminium cintré pour 797_00 / Heatsink in aluminium for 797_00
797_27 RVB-RGB / 39 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
797_31 3 000 °K / 67,6 W / 6 422 lm / IRC ≥ 90797_29 2 800 °K / 50 W / 5 200 lm
797_00 Coupole sans équipement électrique / Dome without LED - (LEDs 260 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
Existe aussi en plafonnier (réf. 3166)925
150
Ø 750
799 COUPOLE GOUTTE 42 Design Atelier Sedap
799_32 2 700 °K / 41,6 W / 3 952 lm / IRC ≥ 90
799_26 3 100 °K / 31 W / 3 200 lm
5195 Dissipateur de chaleur en aluminium cintré pour 799_00 / Heatsink in aluminium for 799_00
799_27 RVB-RGB / 24 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
799_31 3 000 °K / 41,6 W / 3 952 lm / IRC ≥ 90799_29 2 800 °K / 31 W / 3 200 lm
799_00 Coupole sans équipement électrique / Dome without LED - (LEDs 160 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
Existe aussi en plafonnier (réf. 3168) Ø 42 cm
798 COUPOLE GOUTTE 75 Design Atelier Sedap
798_32
Ø 75 cm
2 700 °K / 67,6 W / 6 422 lm / IRC ≥ 90
798_26 3 100 °K / 50 W / 5 200 lm
5196 Dissipateur de chaleur en aluminium cintré pour 798_00 / Heatsink in aluminium for 798_00
798_27 RVB-RGB / 39 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
798_31 3 000 °K / 67,6 W / 6 422 lm / IRC ≥ 90798_29 2 800 °K / 50 W / 5 200 lm
798_00 Coupole sans équipement électrique / Dome without LED - (LEDs 260 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
Existe aussi en plafonnier (réf. 3167)
11lighting 2018
Gamme de coupoles sculptées encastrées en plâtre HD pour éclairage LEDs avec alimentation séparée. Range of high-strength plaster sculpted domes, for recessed LED lighting with separate power supply.
793 / COUPOLE STYLE 75
12 lighting 2018
COUPOLES STYLEdesign Atelier Sedap
COUPOLES STYLE
595
85
Ø 420
925
150
Ø 750
791 / COUPOLES STYLE 42
Schéma de pose d’une coupole lumineuse
3 pattes de sécurité (fournies)Câbles de sécurité non fournis 24 mm max
Faux plafond
Pour raccorder, utiliser :- Colle à carreaux de plâtre ou- Enduit cellulosique type Sim
791 COUPOLE 42 STYLE Design Atelier Sedap
791_32 2 700 °K / 41,6 W / 3 952 lm / IRC ≥ 90
791_26 3 100 °K / 31 W / 3 200 lm
5195 Dissipateur de chaleur en aluminium cintré pour 791_00 / Heatsink in aluminium for 791_00
791_27 RVB-RGB / 24 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
791_31 3 000 °K / 41,6 W / 3 952 lm / IRC ≥ 90791_29 2 800 °K / 31 W / 3 200 lm
791_00 Coupole sans équipement électrique / Dome without LED - (LEDs 160 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
793 COUPOLE 75 STYLE Design Atelier Sedap
793_32 2 700 °K / 67,6 W / 6 422 lm / IRC ≥ 90
793_26 3 100 °K / 50 W / 5 200 lm
5196 Dissipateur de chaleur en aluminium cintré pour 793_00 / Heatsink in aluminium for 793_00
793_27 RVB-RGB / 39 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
793_31 3 000 °K / 67,6 W / 6 422 lm / IRC ≥ 90793_29 2 800 °K / 50 W / 5 200 lm
793_00 Coupole sans équipement électrique / Dome without LED - (LEDs 260 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
6,4 KG
14,5 KG
Existe aussi en plafonnier réf. 3161
Existe aussi en plafonnier réf. 3163
13lighting 2018
COUPOLES STYLE
900 / COUPOLE RIVOLI
14 lighting 2018
COUPOLES STYLE
1175
200
Ø 1000
795 / COUPOLE STYLE 100 900 / COUPOLE 100 RIVOLI
795 COUPOLE 100 STYLE Design Atelier Sedap
795_32 2 700 °K / 88,4 W / 8 400 lm / IRC ≥ 90
795_26 3 100 °K / 65 W / 6 800 lm
5190.2 Dissipateur de chaleur en aluminium cintré pour 795_00 / Heatsink in aluminium for 795_00
795_27 RVB-RGB / 51 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
795_31 3 000 °K / 88,4 W / 8 400 lm / IRC ≥ 90795_29 2 800 °K / 65 W / 6 800 lm
795_00 Coupole sans équipement électrique / Dome without LED - (LEDs 340 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
20 KG
1240
120
Ø 1000
900 COUPOLE 100 RIVOLI Design Atelier Sedap
900_32 2 700 °K / 88,4 W / 8 400 lm / IRC ≥ 90
900_26 3 100 °K / 65 W / 6 800 lm
5190.2 Dissipateur de chaleur en aluminium cintré pour 900_00 / Heatsink in aluminium for 900_00
900_27 RVB-RGB / 51 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
900_31 3 000 °K / 88,4 W / 8 400 lm / IRC ≥ 90900_29 2 800 °K / 65 W / 6 800 lm
900_00 Coupole sans équipement électrique / Dome without LED - (LEDs 340 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
20 KG
Hauteur d’encastrement hors-tout / Total recessed hight : 120 mm
Existe aussi en plafonnier réf. 3165
15lighting 2018
Existe aussi en plafonnier réf. 3275 et en suspension réf. 3274
Profil en plâtre HD à encastrer pour intégration de sources LED dans plafond et mur. Micro Blade est un système d’épaisseur 75 mm spécialement adapté aux cloisons en plaques de plâtre. Micro Blade is a high strength plaster profile for recessing linear LED lighting, 75 mm deep, especially designed for walls and ceilings.
16 lighting 2018
MICRO BLADECIRCLEdesign Atelier Sedap
MICRO BLADE CIRCLE
767-768-769 / MICRO BLADE CIRCLE 100, 150 & 200
17lighting 2018
MICRO BLADE CIRCLE
758 MICRO BLADE CIRCLE 42 Design Atelier Sedap
758_32 2 700 °K / 41,6 W / 3 952 lm / IRC ≥ 90
758_26 3 100 °K / 31 W / 3 200 lm
5195 Dissipateur de chaleur en aluminium cintré pour 758_00 / Heatsink in aluminium for 758_00
758_27 RVB-RGB / 24 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
758_31 3 000 °K / 41,6 W / 3 952 lm / IRC ≥ 90758_29 2 800 °K / 31 W / 3 200 lm
758_00 Coupole sans équipement électrique / Dome without LED - (LEDs 160 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
15 KG
759 MICRO BLADE CIRCLE 75 Design Atelier Sedap
759_32 2 700 °K / 67,6 W / 6 422 lm / IRC ≥ 90
759_26 3 100 °K / 50 W / 5 200 lm
5196 Dissipateur de chaleur en aluminium cintré pour 759_00 / Heatsink in aluminium for 759_00
759_27 RVB-RGB / 38 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
759_31 3 000 °K / 67,6 W / 6 422 lm / IRC ≥ 90759_29 2 800 °K / 50 W / 5 200 lm
759_00 Coupole sans équipement électrique / Dome without LED - (LEDs 260 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
15 KGExiste aussi en suspension et en plafonnier
767 MICRO BLADE CIRCLE 100 Design Atelier Sedap
767_32 2 700 °K / 88,4 W / 8 400 lm / IRC ≥ 90
767_26 3 100 °K / 65 W / 6 800 lm
5190.2 Dissipateur de chaleur en aluminium cintré pour 767_00 / Heatsink in aluminium for 767_00
767_27 RVB-RGB / 51 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
767_31 3 000 °K / 88,4 W / 8 400 lm / IRC ≥ 90767_29 2 800 °K / 65 W / 6 800 lm
767_00 Coupole sans équipement électrique / Dome without LED - (LEDs 340 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
29 KGExiste aussi en suspension et en plafonnier
767-768-769 / MICRO BLADE CIRCLE 100, 150 & 200759 / MICRO BLADE CIRCLE 75
Schéma de principe Circle
Ø 420
59
575
Ø 750
95
075
1200
120
0
Ø 1000
75
18 lighting 2018
MICRO BLADE CIRCLE
Plus d’informations et photométrie sur sedap.com / More data and photometry available at sedap.com
768 MICRO BLADE CIRCLE 150 Design Atelier Sedap
768_32 2 700 °K / 129 W / 12 226 lm / IRC ≥ 90
768_26 3 100 °K / 95 W / 9 900 lm
5191.3 Dissipateur de chaleur en aluminium cintré pour 768_00 / Heatsink in aluminium for 768_00
768_27 RVB-RGB / 72 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
768_31 3 000 °K / 129 W / 12 226 lm / IRC ≥ 90768_29 2 800 °K / 95 W / 9 900 lm
768_00 Coupole sans équipement électrique / Dome without LED - (LEDs 495 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
44 KGLivré en 2 éléments d’épaisseur 75 mm / Supplied in 2 elements
769 MICRO BLADE CIRCLE 200 Design Atelier Sedap
769_32 2 700 °K / 166,4 W / 15 808 lm / IRC ≥ 90
769_26 3 100 °K / 123 W / 12 800 lm
5192.4 Dissipateur de chaleur en aluminium cintré pour 769_00 / Heatsink in aluminium for 769_00
769_27 RVB-RGB / 96 W / télécommande radio (RF) / Remote control (RF)
RÉFÉRENCE SOURCES
769_31 3 000 °K / 166,4 W / 15 808 lm / IRC ≥ 90769_29 2 800 °K / 123 W / 12 800 lm
769_00 Coupole sans équipement électrique / Dome without LED - (LEDs 640 cm)
2 options dimmables : 1-10V ou DALI (compatible push-dim, ready2mains, corridor function)
74 KGLivré en 4 éléments d’épaisseur 75 mm / Supplied in 4 elements
769 / MICRO BLADE CIRCLE 200
2200
22
00
110
011
00
Ø2000
75
1700
170
0
85
08
50
Ø 1500
75
19lighting 2018
Réf. 7000
P.26
MICRO BLADE DOOBLE 100
Réf. 7002
P.26
MICRO BLADE DOOBLE 50
20 lighting 2018
SYSTÈMES BLADE
Réf. 7011
SYSTÈME
NANO BLADE
Réf. 7009
P.25
SIMPLE BLADE
Réf. 7008
P.24
T-BLADE 8
Réf. 7010
P.56
Réf. 7006
P.26
T-BLADE 10
P.57
MICRO BLADE DOOBLE 35
12.
50
122
17
8 1
7
165
80 50 35
5
12.
50
36
design Atelier Sedap
SYSTÈMES BLADEdesign Atelier Sedap
V-BLADE 170
P.52
Réf. 786
Réf. 775
SYSTÈMES BLADE, MINI BLADE, MICRO BLADE, U-BLADE, V-BLADE, X-BLADE & ECO BLADE
SYSTÈME SYSTÈME
U-BLADE 135
Réf. 782
P.54
BLADE
Réf. 740
P.48
MINI BLADE
Réf. 760
P.44
MICRO BLADE 50
Réf. 772
P.30
MICRO BLADE 35
Réf. 770
P.36
MICRO BLADE CADRE
Réf. 779
P.39
MICRO BLADE 25
Réf. 730
P.28
ECO BLADE PLAN
Réf. 733
P.42
MICRO BLADE PLINTHE
Réf. 737
P.38
MICRO X-BLADE 35
Réf. 738
P.58
ECO BLADE CORNICHE
Réf. 734
P.42
MICRO BLADE CURTAIN 1-2
Réf. 756-761
P.41
MICRO X-BLADE
Réf. 870
P.58
X-BLADE
Réf. 840
P.58
MINI X-BLADE
Réf. 860
P.58
MICRO BLADE 63
Réf. 771
P.36
U-BLADE 120
Réf. 780
P.52
U-BLADE 120 X 120
Réf. 7004
P.54
MICRO BLADE ANGLE
P.40
21lighting 2018
ENCASTREMENT PLÂTRE / PLÂTRE Plaster to plaster jointing.
• Profil en plâtre très haute densité - longueur 1 m ou 2 m - à encas- trer et à raccorder dans de la plaque de plâtre ou dans du staff. High-density-plaster profile. To be recessed in plaster or plasterboard.
FINITION PARFAITE ASSURÉE Perfect jointing guaranteed.
• Extrémités et angles préfabriqués. Système d’alignement. Pre-moulded end parts and corners. Alignment system.
GRANDE SOUPLESSE DE CONCEPTION Great freedom of design.
• Positionnement mural - horizontal ou vertical - ou positionnement au plafond. Balisage de circulation et escalier, encadrement de portes. Horizontal or vertical wall mounting, or ceiling mounting. Ideal for corridors, staircases...
ÉCLAIRAGE CONTINU UNIFORME Homogenous, continnous lighting.
• Profil étudié pour une diffusion et une régularité optimale de la lumière. The plaster profile has been designed for the best light reflection.
SOURCES À ÉCONOMIE D’ÉNERGIE Energy saving systems.
• Fluorescent T5 et flexible Leds haute performance. High performance fluorescent T5 and linear LED lighting.
SYSTÈMES BLADE, MINI BLADE, MICRO BLADE, U-BLADE, V-BLADE & X-BLADE Le nouveau concept d’intégration dans l’architecture. The new lighting concept for architecture.
22 lighting 2018
MINI BLADE
MICRO BLADE 35
SYSTÈMES BLADE, MINI BLADE, MICRO BLADE, U-BLADE, V-BLADE, X-BLADE & ECO BLADE
MICRO BLADE 50 CROSS
23lighting 2018
24 lighting 2018
Profil en plâtre HD à encastrer pour intégration d’un profilé LED dans plafond et mur. Simple Blade est un système d’épaisseur 17 mm spécialement adapté aux cloisons en plaques de plâtre. Fixation de l’équipement par aimants. Micro Blade dooble is a high strength plaster profile for recessing linear LED lighting profile , 17 mm deep, especially designed for walls and ceilings. Equipment installation with magnets.
SIMPLE BLADEdesign Atelier Sedap
7008 SIMPLE BLADE
12.
50
122
17
8 1
7
17
17
122
2,00 M
DÉSIGNATION
7008 SIMPLE BLADE Design Atelier Sedap
7008.2 Profil droit encastrement mur
RÉFÉRENCE
1 M
LONGUEUR
5198 Écran transparent et dissipateur de chaleur aimantableTransparent screen and aluminum, magnetizable heatsink
1,00 M7008.1 Profil droit encastrement mur
25lighting 2018
Profil en plâtre HD à encastrer pour intégration de sources LED dans plafond et mur. Nano Blade est un système d’épaisseur 36 mm spécialement adapté aux cloisons en plaques de plâtre. Fixation de l’équipement par aimants.Nano Blade is a high strength plaster profile for recessing linear LED lighting, 36 mm deep, especially designed for walls and ceilings. Equipment installation with magnets.
NANO BLADEdesign Atelier Sedap
7009 NANO BLADE
165
80 50 35
5
12.
50
36
35
36
165
2,00 M
DÉSIGNATION
7009 NANO BLADE Design Atelier Sedap
7009.2 Profil droit encastrement mur
RÉFÉRENCE
1 M
LONGUEUR
5198 Écran transparent et dissipateur de chaleur aimantableTransparent screen and aluminum, magnetizable heatsink
1,00 M7009.1 Profil droit encastrement mur
MICRO BLADE DOOBLEProfil en plâtre HD à encastrer pour intégration de sources LED dans plafond et mur. Micro Blade dooble est un système d’épaisseur 75 mm spécialement adapté aux cloisons en plaques de plâtre. Micro Blade dooble is a high strength plaster profile for recessing linear LED lighting, 75 mm deep, especially designed for walls and ceilings
7002 / MICRO BLADE DOOBLE 100
26 lighting 2018
MICRO BLADE DOOBLE
design Atelier Sedap
MICRO BLADE DOOBLE
1,20 M1,50 M
LONGUEURDÉSIGNATION
7000 / MICRO BLADE DOOBLE 50
7000 MICRO BLADE DOOBLE 50 Design Atelier Sedap
7000.120 Profil droit 50
RÉFÉRENCE
7000.150 Profil droit 507001 Paire d’extrémités / Pair of end caps
1,20 M1,50 M
LONGUEURDÉSIGNATION
7002 MICRO BLADE DOOBLE 100 Design Atelier Sedap
7002.120 Profil droit 100
RÉFÉRENCE
7002.150 Profil droit 1007003 Paire d’extrémités / Pair of end caps
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
MICRO BLADE DOOBLE 50
MICRO BLADE DOOBLE 100
7002 / MICRO BLADE DOOBLE 1007000 / MICRO BLADE DOOBLE 5050 100
27lighting 2018
1,20 M1,50 M
LONGUEURDÉSIGNATION
7006 MICRO BLADE DOOBLE 35 Design Atelier Sedap
7006.120 Profil droit 35
RÉFÉRENCE
7006.150 Profil droit 357007 Paire d’extrémités / Pair of end caps
7006 / MICRO BLADE DOOBLE 3535
MICRO BLADE DOOBLE 35
730 731 / MICRO BLADE 25
28 lighting 2018
MICRO BLADE 25
design Atelier Sedap
Profil en plâtre HD conçu pour intégration par aimants de balisage LED en encastrement sur rail dans plafonds et murs. Micro Blade 25 est un système d’épaisseur 56 mm spécialement adapté aux cloisons en plaques de plâtre. Micro Blade 25 is a high strength plaster profile for recessing linear LED with magnets, for ambiant lighting, 56 mm deep, especially designed for walls and ceilings.
MICRO BLADE 25
25 118
56
MICRO BLADE 25
1,20 M
1 M
LONGUEURDÉSIGNATION
730-731-732 MICRO BLADE 25 Design Atelier Sedap
730.120 Profil droit encsatrement mur ou plafond
RÉFÉRENCE
736 Paire d’extrémités / Pair of end caps5198 Écran transparent et dissipateur de chaleur aimantable
Transparent screen and aluminum, magnetizable heatsink1,36 x 0,23 M1,25 M
731 Profil cintré (rayon 2 M - 10 éléments pour 1 cercle)5198.R2 Écran et alu pour ARC2 / Screen and heat sink for ARC2732 Profil cintré (rayon 4 M - 20 éléments pour 1 cercle)
Écran et alu pour ARC4 / Screen and heat sink for ARC45198.R41,30 x 0,20 M1,25 M
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
731 / MICRO BLADE 25-R2
732 / MICRO BLADE 25-R4
730 / MICRO BLADE 25
136
23
123
130
20
124
1360
1230
1240
1300
223
195
29lighting 2018
32 extract 2018
772 / MICRO BLADE 50
30 lighting 2018
MICRO BLADE 50design Atelier Sedap
MICRO BLADE 50
2,6 KG3,25 KG
50
50
165
35
POIDS
773 / MICRO BLADE 50 TURN
Vissage
Ecran diffusant
Flexible LED sur profilaluminium
Enduit - colle à base de plâtre, acrylique ou polyester pour collage et lissage
772 / MICRO BLADE 50
1,20 M1,50 M
LONGUEURDÉSIGNATION
772 MICRO BLADE 50 Design Atelier Sedap
772.120 Profil droit
RÉFÉRENCE
772.150 Profil droit 778 Paire d’extrémités / Pair of end caps
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
45 MM
2,6 KG3,25 KG
POIDS
1,20 M1,50 M
LONGUEURDÉSIGNATION
772R MICRO BLADE 50 POSE RAIL Design Atelier Sedap
772.120R Profil droit pose rail
RÉFÉRENCE
772.150R Profil droit pose rail778 Paire d’extrémités / Pair of end caps 45 MM
772R / MICRO BLADE 50 POSE RAIL
31lighting 2018
MICRO BLADE 50 SEGMENTS
design Atelier Sedap
32 lighting 2018
Accessoires du profil encastré MicroBlade réf. 772, les segments MB50 apportent de nouvelles solutions pratiques en rythme des lignes de lumière encastrée: Insertion de spot, rupture de ligne sans accessoire, éclairage direct Powered by iGuzzini, spot orientable, trappe technique d’accès, détecteur de présence...An addition of the MicroBlade recessed profile ref.772, the MB50 segments bring new practical solutions to interrupt the rhythm of the lines of recessed light with integrated adjustable spotlights, Powered by iGuzzini, technical access hatch, presence detector...
7012 SEGMENT NU
SEGMENT TROCADERO SEGMENT ANGLE : 1/1 SEGMENT TRIO SEGMENT iGuzzini SEGMENT NU
230
210
54 230 54 230
160
230
160
230
54
54
210
210
SEGMENT iGuzzini
160
230 54
SEGMENT TROCADERO SEGMENT ANGLE : 1/1 SEGMENT TRIO SEGMENT iGuzzini SEGMENT NU
230
210
54 230 54 230
160
230
160
230
54
54
210
210
SEGMENT iGuzzini
160
230 54
200
200
7012 Segment nu
33lighting 2018
MICRO BLADE 50 SEGMENTS
7013 SEGMENT SPOT LEDs 7,8 W / 350mA / 3 000 °K / 970 lm / IP20
7015 SEGMENT LASER BLADE XS5 LEDs 4 W / 700mA / 3 000 °K / 530 lm / IP20
7014 SEGMENT TRAPPE ACCESSOIRE
7013.01 MiniStar 7013.02 Trocadéro 7013.03 Trio 7013.04 Angle7013.05 Laser Blade XS3
7014.01 Trappe technique 7014.02 Passe-câble In7014.03 Passe-câble Out
SEGMENT TROCADERO SEGMENT ANGLE : 1/1 SEGMENT TRIO SEGMENT iGuzzini SEGMENT NU
230
210
54 230 54 230
160
230
160
230
54
54
210
210
SEGMENT iGuzzini
160
230 54
200
200
ø120
SEGMENT TROCADERO SEGMENT ANGLE : 1/1 SEGMENT TRIO SEGMENT iGuzzini SEGMENT NU
230
210
54 230 54 230
160
230
160
230
54
54
210
210
SEGMENT iGuzzini
160
230 54
200
200
ø120
SEGMENT TROCADERO SEGMENT ANGLE : 1/1 SEGMENT TRIO SEGMENT iGuzzini SEGMENT NU
230
210
54 230 54 230
160
230
160
230
54
54
210
210
SEGMENT iGuzzini
160
230 54
200
200
ø120SEGMENT TROCADERO SEGMENT ANGLE : 1/1 SEGMENT TRIO SEGMENT iGuzzini SEGMENT NU
230
210
54 230 54 230
160
230
160
230
54
54
210
210
SEGMENT iGuzzini
160
230 54
200
200
ø120
SEGMENT TROCADERO SEGMENT ANGLE : 1/1 SEGMENT TRIO SEGMENT iGuzzini SEGMENT NU
230
210
54 230 54 230
160
230
160
230
54
54
210
210
SEGMENT iGuzzini
160
230 54
SEGMENT TROCADERO SEGMENT ANGLE : 1/1 SEGMENT TRIO SEGMENT iGuzzini SEGMENT NU
230
210
54 230 54 230
160
230
160
230
54
54
210
210
SEGMENT iGuzzini
160
230 54
200
200
SEGMENT TROCADERO SEGMENT ANGLE : 1/1 SEGMENT TRIO SEGMENT iGuzzini SEGMENT NU
230
210
54 230 54 230
160
230
160
230
54
54
210
210
SEGMENT iGuzzini
160
230 54
200
200
ø120SEGMENT TROCADERO SEGMENT ANGLE : 1/1 SEGMENT TRIO SEGMENT iGuzzini SEGMENT NU
230
210
54 230 54 230
160
230
160
230
54
54
210
210
SEGMENT iGuzzini
160
230 54
200
200
ø120
SEGMENT TROCADERO SEGMENT ANGLE : 1/1 SEGMENT TRIO SEGMENT iGuzzini SEGMENT NU
230
210
54 230 54 230
160
230
160
230
54
54
210
210
SEGMENT iGuzzini
160
230 54
200
200
ø120
7013.01 MiniStar 7013.02 Trocadéro 7013.03 Trio
7013.04 Angle 7013.05 Laser Blade XS3
SEGMENT TROCADERO SEGMENT ANGLE : 1/1 SEGMENT TRIO SEGMENT iGuzzini SEGMENT NU
230
210
54 230 54 230
160
230
160
230
54
54
210
210
SEGMENT iGuzzini
160
230 54
200
ø120
200
7014.01 Trappe technique 7014.02 Passe-câble In 7014.03 Passe-câble Out
7015 Laser Blade XS5
572 x 572 MM
83 cm LEDs strip needed to be fixed outside the circleNécessite 83 cm de flex LEDs fixé à l’extérieur du cercle
7 KG
572
572
500
50
55
DIMENSIONS
773 / MICRO BLADE 50 TURN
Profil en plâtre HD à encastrer pour intégration de sources LED dans plafonds et murs. Micro Blade est un système d’épaisseur 55 mm spécialement adapté aux cloisons en plaques de plâtre.Micro Blade is a high strength plaster profile for recessing linear LED lighting. 55 mm deep, especially de-signed for walls and ceilings.
POIDSDÉSIGNATION
773 MICRO BLADE 50 TURN Design Atelier Sedap
773 Profil type Micro Blade 50 en arrondi
RÉFÉRENCE
Micro Blade 50 profile in rounded shapeLivré sans LEDs / Supplied without LEDs
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
34 lighting 2018
design Atelier Sedap
MICRO BLADE
50 TURN
764 / MICRO BLADE CROSS 50 60/120
Profil en plâtre HD à encastrer pour intégration de sources LED dans plafonds et murs. Micro Blade est un système d’épaisseur 55 mm spécialement adapté aux cloisons en plaques de plâtre.Micro Blade is a high strength plaster profile for recessing linear LED lighting. 55 mm deep, especially designed for walls and ceilings.
500
382
360
360
764 / MICRO BLADE CROSS 50 60/120
500 x 382 MM 3 KG
DIMENSIONS POIDSDÉSIGNATION
764 MICRO BLADE CROSS 60/120 Design Atelier Sedap
764 Profil type Micro Blade 50 en croix 60/120
RÉFÉRENCE
Micro Blade 50 cross 60/120 profileLivré sans LEDs / Supplied without LEDs
360 x 360 MM 3 KG
DIMENSIONS POIDSDÉSIGNATION
765 MICRO BLADE CROSS 90/90 Design Atelier Sedap
765 Profil type Micro Blade 50 en croix 90/90
RÉFÉRENCE
Micro Blade 50 cross 90/90 profileLivré sans LEDs / Supplied without LEDs
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
35lighting 2018
MICRO BLADE 50 CROSS
design Atelier Sedap
Profil en plâtre HD à encastrer pour intégration de sources LED dans plafond et mur. Micro Blade est un système d’épaisseur 56 mm spécialement adapté aux cloisons en plaques de plâtre.Micro Blade is a high strength plaster profile for recessing linear LED lighting, 56 mm deep, especially designed for walls and ceilings.
770 / MICRO BLADE 35
36 lighting 2018
MICRO BLADE 35 & 63design Atelier Sedap
50
35
115
56
63
165
MICRO BLADE 35 & 63
Vissage
Flexible LED sur profilaluminium
Ecran diffusant
Enduit - colle à base de plâtre, acrylique ou polyester pour collage et lissage
771 / MICRO BLADE 63 770 / MICRO BLADE 35
771 / MICRO BLADE 63
771 / MICRO BLADE 63
MICRO BLADE 63
1,20 M 2 KG
POIDSDÉSIGNATION
770 MICRO BLADE 35 Design Atelier Sedap
770.120 Profil droit
RÉFÉRENCE
Profil droitPaire d’extrémités / Pair of end caps
770.150776
2,5 KG1,50 M40 MM
1,20 M 2,5 KG
POIDSDÉSIGNATION
771 MICRO BLADE 63 Design Atelier Sedap
771.120 Profil droit
RÉFÉRENCE
Profil droitPaire d’extrémités / Pair of end caps
771.150777
3,1 KG1,50 M45 MM
LONGUEUR
LONGUEUR
37lighting 2018
MICRO BLADE PLINTHE
737 / MICRO BLADE PLINTHE
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
1,20 M
DÉSIGNATION
737 MICRO BLADE PLINTHE Design Atelier Sedap
737.120 Profil droit encastrement mur
RÉFÉRENCE
Profil droit encastrement mur737.150 1,50 M1 M
LONGUEUR
5198 Écran transparent et dissipateur de chaleur aimantableTransparent screen and aluminum, magnetizable heatsink
Profil en plâtre HD à encastrer pour intégration de sources LED dans mur. Fixation de l’équipement par aimants.Micro Blade is a high strength plaster profile for recessing linear LED lighting, 56 mm deep, especially designed for walls. Equipment installation with magnets.
50
90
56
38 lighting 2018
MICRO BLADE PLINTHE
design Atelier Sedap
Profil en plâtre HD à encastrer pour intégration de sources LED dans plafond et mur.Micro Blade is a high strength plaster profile for recessing linear LED lighting, 60mm deep, especially designed for walls and ceilings.
170
60
40
35
35
779 / MICRO BLADE CADRE 779 / MICRO BLADE CADRE
MICRO BLADE CADRE
1,20 M 2,5 KG
POIDSDÉSIGNATION
779 MICRO BLADE CADRE Design Atelier Sedap
779.120 Profil droit
RÉFÉRENCE
Profil droit779.150 3,1 KG1,50 M
LONGUEUR
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
39lighting 2018
MICRO BLADE CADREdesign Atelier Sedap
Profil en plâtre HD à encastrer pour intégration de sources LED dans plafond et mur.Micro Blade is a high strength plaster profile for recessing linear LED lighting, 54mm deep, especially designed for walls and ceilings.
775 / MICRO BLADE ANGLE
MICRO BLADE ANGLE
1,20 M 2,8 KG
POIDSDÉSIGNATION
775 MICRO BLADE ANGLE Design Atelier Sedap
775.120 Profil droit
RÉFÉRENCE
Profil droit775.150 3,5 KG1,50 M
LONGUEUR
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
27
124
54
50
35
133
33
40 lighting 2018
MICRO BLADE ANGLEdesign Atelier Sedap
Profil en plâtre HD à encastrer pour intégration de sources LEDs dans plafond et mur. Micro blade est un système spécialement adapté aux cloisons en plaques de plâtre.Micro blade is a high strength plaster profile for recessing linear LEDs lighting, especially designed for walls and ceilings.
MICRO BLADE CURTAIN 2
MICRO BLADE CURTAIN 1
73
115
185
85
120
110
180
132
73
115
185
85
120
110
180
132
1,20 M
DÉSIGNATION
761 MICRO BLADE CURTAIN 1 Design Atelier Sedap
761.120 Profil droit
RÉFÉRENCE
Profil droit761.150 1,50 M
LONGUEUR
1,20 M
DÉSIGNATION
756 MICRO BLADE CURTAIN 2 Design Atelier Sedap
756.120 Profil droit
RÉFÉRENCE
Profil droit756.150 1,50 M
LONGUEUR
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
761 / MICRO BLADE CURTAIN 1
41lighting 2018
MICRO BLADE CURTAIN
design Atelier Sedap
MICRO BLADE CURTAIN 2
Profils en plâtre HD pour intégration d’éclairage LED dans plafonds et murs (encastrement ou saillie). Eco Blade est un sys-tème d’épaisseur 55 mm spécialement adapté aux cloisons en plaques de plâtre.Eco Blade 25 is a high strength plaster profile for linear LED lighting, 55mm deep, especially designed for walls and ceilings (recessed or surface-mounted).
733 / ECO BLADE PLAN
42 lighting 2018
ECO BLADEdesign Atelier Sedap
ECO BLADEECOBLADE
63
75
43
103
68 137
55
35
30
104 positions possibles
733 / ECO BLADE PLAN 734 / ECO BLADE CORNICHE
1,20 M
1 M
LONGUEURDÉSIGNATION
733 ECO BLADE PLAN Design Atelier Sedap
733.120 Profil droit encsatrement mur ou plafond
RÉFÉRENCE
733.150 Profil droit encsatrement mur ou plafond5197 Écran transparent et dissipateur de chaleur
Transparent screen and aluminum heatsink
1,50 M
1,20 M
1 M
LONGUEURDÉSIGNATION
734 ECO BLADE CORNICHE Design Atelier Sedap
734.120 Profil droit angle
RÉFÉRENCE
734.150 Profil droit angle
5197 Écran transparent et dissipateur de chaleurTransparent screen and aluminum heatsink
1,50 M1,20 M735.120 Moulure pour pose Eco Blade Corniche en saillie
735.150 Moulure pour pose Eco Blade Corniche en saillie 1,50 M
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
734 / ECO BLADE CORNICHE
733 / ECO BLADE PLAN
734 / ECO BLADE CORNICHE
735 / ECO BLADE MOULURE
43lighting 2018
760 / MINI BLADE
44 lighting 2018
MINI BLADEdesign Atelier Sedap
Profil en plâtre HD à encastrer pour intégration de sources LED dans plafond et mur. Mini Blade est un système d’épaisseur 55 mm spécialement adapté aux cloisons en plaques de plâtre. Mini Blade is a high strength plaster profile for recessing linear LED lighting, 55mm deep, especially designed for walls and ceilings.
MINI BLADE
760 / MINI BLADE
760 / MINI BLADE
45lighting 2018
48
MINI BLADE
MINI BLADEMINI BLADE
760 / MINI BLADE
46 lighting 2018
MINI BLADE
MINI BLADE760 / MINI BLADE
Vissage plaque / rail
Largeur minimum 5 mm
Vissage Blade / rail
Ecran diffusant
Flex LED sur profil aluminium
Plaque de fixation de l’équipement électrique
Enduit - colle à base deplâtre, acrylique ou polyester pour collage et lissage
Rail de fixation en métal
35
41
40
55
90
100
230
6,6 KG8,2 KG
POIDS
1,20 M1,50 M
LONGUEURDÉSIGNATION
760 MINI BLADE Design Atelier Sedap
760.120 Profil droit encastrement mur ou plafond
RÉFÉRENCE
760.150 Profil droit encastrement mur ou plafond766 Paire d’extrémités / Pair of end caps 60 MM011051324 Support pour intégration d’alimentation
Power supply recessed system
760 / MINI BLADE
MINI BLADE
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
47lighting 2018
740 / BLADE
48 lighting 2018
BLADEdesign Atelier Sedap
Profil en plâtre HD à encastrer pour intégration de sources fluorescentesT5 ou LED dans plafond et mur.High strength plaster profile for recessing T5 fluo or linear LED lighting in walls and ceilings.
740 / BLADE
BLADE
BLADE
740 / BLADE
740 / BLADE
49lighting 2018
BLADE
740 / BLADE
740 / BLADE
50 lighting 2018
740 / BLADE
200 cm
27
100 cm
27
27
27
27
27
27
27
27
27
23
27
23
BLADE
Vissage plaque / rail
Largeur minimum 5 mm
Vissage Blade / rail
Rail de fixation en métal
Diffuseur polycarbonate
Tube ou Flex LED
Point de suspension pour pose en plafond
Plaque de fixation de l’équipement électrique
Enduit - colle à base de plâtre, acrylique ou poly-ester pour collage et lis-sage
140 mm
7,2 KG14,6 KG
POIDS
1,00 M2,00 M
LONGUEURDÉSIGNATION
740 BLADE Design Atelier Sedap
740.1 Profil droit
RÉFÉRENCE
740.2 Profil droit
2,2 KG2,4 KG
POIDS
0,27 M0,27 M
LONGUEURDÉSIGNATION
741 Angle droit descendant 90°
RÉFÉRENCE
742 Angle arrondi descendant 90°
2,2 KG2,4 KG
POIDS
0,27 M0,27 M
LONGUEURDÉSIGNATION
754 Angle droit descendant 270°
RÉFÉRENCE
755 Angle arrondi descendant 270°
3,5 KG
POIDS
0,15 M
LONGUEURDÉSIGNATION
748 Angle mur-mur / mur-plafond
RÉFÉRENCE
Wall to wall/ wall to ceiling corner
2 KG2 KG
POIDS
0,15 M0,15 M
LONGUEURDÉSIGNATION
743.2 Paire extrémité gauche / Pair of left end caps
RÉFÉRENCE
745.2 Paire extrémité droite / Pair of right end caps2 KG750 1 x 743 + 1 x 7452 KG0,15 M744.2 Paire extrémité arrondie gauche
Pair of rounded right end caps2 KG0,15 M746.2 Paire extrémité arrondie droite
Pair of rounded right end caps2 KG751 1 x 744 + 1 x 746
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
51lighting 2018
15 15
15 15
27
786 / V-BLADE 170
780 / U-BLADE 120
786 / V-BLADE 170
Profil en V ou en U en plâtre HD à encastrer pour intégration libre (par scie cloche) de sources MR16, GU10 ou LED COB.High strength, V-shaped or U-shaped plaster profile for recessing MR16, GU10 or LED COB downlights in walls and ceilings (hole cutter).
52 lighting 2018
V-BLADE 170U-BLADE 120
design Atelier Sedap
design Atelier Sedap
780 / U-BLADE 120786 / V-BLADE 170
V-BLADE 170 & U-BLADE 120
70
120
170
220
270
60 int
85 int100
120
4 KG8 KG
POIDS
1,00 M2,00 M
LONGUEURDÉSIGNATION
786 V-BLADE 170 Design Atelier Sedap
786.1 Profil droit encastrement mur ou plafond
RÉFÉRENCE
786.2 Profil droit encastrement mur ou plafond
787 Paire d’extrémités / Pair of end caps 50 MM
140 MMHauteur d’encastrement hors toutOverall dimension
4,5 KG9 KG
POIDS
1,00 M2,00 M
LONGUEURDÉSIGNATION
780 U-BLADE 120 Design Atelier Sedap
780.1 Profil droit encastrement mur ou plafond
RÉFÉRENCE
780.2 Profil droit encastrement mur ou plafond
781 Paire d’extrémités / Pair of end caps 45 MM
150 MMHauteur d’encastrement hors toutOverall dimension
ÉQUIPEMENT MR16, GU10 & LED COB U-BLADE 120 & V-BLADE 170
011100291-1 Spot MR16 blanc - P. maxi: 50 W / GU5.3 - 12V
Ampoule non fournie / White or black downlight (bulb not included)
RÉFÉRENCE SOURCES
011100294-0 Spot GU10 blanc ou noir - P. maxi: 50 W / GU10 - 230VAmpoule et alimentation non fournies / White downlight (bulb and power supply not included)
Spot LED COB 350 mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP / Alimentation non fournie011060058-0 Spot LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
53lighting 2018
011060063-0
Profils en U en plâtre HD à encastrer pour intégration libre dans plafond de boîtiers avec sources QR111 ou de spots encastrés MR16, GU10 ou LED COB.High strength, U-shaped plaster profiles for recessing in ceilings QR111 boxes or MR16, GU10 or LED COB downlights.
U-BLADE 120 x 120 & U-BLADE 135
7004 / U-BLADE 120 x 120
54 lighting 2018
U-BLADE 120 x 120
design Atelier Sedap
011100287/BOÎTIER 1 QR111 NOIR 011100288/BOÎTIER 2 QR111 NOIR 011100289/BOÎTIER 3 QR111 NOIR
782 / U-BLADE 135
U-BLADE 120 X 120 & U-BLADE 135
Plus d’informations et photométrie sur sedap.com / More data and photometry available at sedap.com
85 int95
135
235
cale bois60 x 8 mm
782 / U-BLADE 135 détail
120 int130
120
220
782 / U-BLADE 135
ÉQUIPEMENT MR16, GU10 & LED COB U-BLADE 135 & U-BLADE 120 X 120
011100291-1 Spot MR16 blanc - P. maxi: 50 W / GU5.3 - 12V
Ampoule non fournie / White or black downlight (bulb not included)
RÉFÉRENCE SOURCES
011100294-0 Spot GU10 blanc ou noir - P. maxi: 50 W / GU10 - 230VAmpoule et alimentation non fournies / White downlight (bulb and power supply not included)
ÉQUIPEMENT QR111 U-BLADE 135
011100287-1 Boîtier QR111 - Orientable noir ou blanc - P. maxi: 75 W / G53 - 12V / Longueur boîtier: 133 mm
Ampoules et alimentation non fournies / Adjustable white downlight (bulbs and power supply not included)
RÉFÉRENCE SOURCES
011100288-0 Boîtier QR111 - Orientables noir ou blanc - P. maxi: 2 x 75 W / G53 - 12V / Longueur boîtier: 260 mmAmpoule et alimentation non fournies / Adjustable white downlight (bulb and power supply not included)
Ampoules et alimentation non fournies / Adjustable white downlight (bulbs and power supply not included)011100289-0 Boîtier QR111 - Orientables noir ou blanc - P. maxi: 3 x 75 W / G53 - 12V / Longueur boîtier: 385 mm
5 KG10 KG
POIDS
1,00 M2,00 M
LONGUEURDÉSIGNATION
7004 U-BLADE 120 x 120 Design Atelier Sedap
7004.1 Profil droit encastrement mur ou plafond
RÉFÉRENCE
7004.2 Profil droit encastrement mur ou plafond
7005 Paire d’extrémités / Pair of end caps 50 MM
210 MMHauteur d’encastrement hors toutOverall dimension
5 KG10 KG
POIDS
1,00 M2,00 M
LONGUEURDÉSIGNATION
782 U-BLADE 135 Design Atelier Sedap
782.1 Profil droit encastrement mur ou plafond
RÉFÉRENCE
782.2 Profil droit encastrement mur ou plafond
783 Paire d’extrémités / Pair of end caps, 50 MM
175 MMHauteur d’encastrement hors toutOverall dimension
Spot LED COB 350 mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP / Alimentation non fournie011060058-0 Spot LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
55lighting 2018
011060063-0
56 lighting 2018
T-BLADEdesign Atelier Sedap
7010 / T-BLADE 8
7010 / T-BLADE 8
57lighting 2018
T-BLADE
7,2 KG14,6 KG
POIDS
1,00 M2,00 M
LONGUEURDÉSIGNATION
7010 T-BLADE 8 Design Atelier Sedap
7010.1 Profil droit
RÉFÉRENCE
7010.2 Profil droit
8,2 KG15,6 KG
POIDS
1,00 M2,00 M
LONGUEURDÉSIGNATION
7011 T-BLADE 10 Design Atelier Sedap
7011.1 Profil droit
RÉFÉRENCE
7011.2 Profil droit
41
41
13
13
46
25
101
80
46
41
100
13
41
41
13
13
46
25
101
80
25
41
80
13
Structures d’éclairage indirect mural ou de plafond, sans encastrement (Flex LEDs). Grâce à son installation facile vissée-collée, T-BLADE multiplie les possibilités d’éclairage avec ses lignes continues adaptables à l’infini...Wall or ceiling indirect lighting system. Surface-mounted structures (LED strips). A practical and useful surface wash solution, T-BLADE multiplies the possibilities of washing ceilings with its continuous lines adaptable to infinity...
7011 / T-BLADE 10
Structures d’éclairage indirect mural ou de plafond, sans encastrement (Flex LEDs ou T5).Wall or ceiling indirect lighting system. Surface-mounted structures (LED strips or T5).
X-BLADE, MINI X-BLADE & MICRO X-BLADE
840 / X-BLADE
7,2 KG14,6 KG
POIDS
1,00 M2,00 M
LONGUEURDÉSIGNATION
840 X-BLADE Design Atelier Sedap
840.1 Profil droit
RÉFÉRENCE
840.2 Profil droit 0,15 MPaire d’extrémités gauche et droite
Pair of left and right end caps846
110 100
100
40
135
58 lighting 2018
X-BLADEdesign Atelier Sedap
X-BLADE, MINI X-BLADE & MICRO X-BLADE
860 / MINI X-BLADE
205050
3560
100 2060
60 35
870 / MICRO X-BLADE
1,20 M
DÉSIGNATION
738 MICRO X-BLADE 35 Design Atelier Sedap
738.120 Profil droit à coller-visser
RÉFÉRENCE
Profil droit à coller-visser738.150 1,50 M
5 M
LONGUEUR
739 Paire d’embouts / Pair of end capsRouleau de lexan diffusant / Roll if diffusing PMMA(longueur sur demande jusqu’à 50m / Up to 50m on request)
5176
30
55
35
50
30
35
8,2 KG
POIDS
1,50 M0,15 M
LONGUEURDÉSIGNATION
860 MINI X-BLADE Design Atelier Sedap
860 Profil droit
RÉFÉRENCE
866 Paire d’extrémités gauche et droitePair of left and right end caps
5 MRouleau de lexan diffusant / Roll if diffusing PMMA(longueur sur demande jusqu’à 50m / Up to 50m on request)
5176
3,1 KG
POIDS
1,50 M0,15 M
LONGUEURDÉSIGNATION
870 MICRO X-BLADE Design Atelier Sedap
870 Profil droit
RÉFÉRENCE
876 Paire d’extrémités gauche et droitePair of left and right end caps
5 MRouleau de lexan diffusant / Roll if diffusing PMMA(longueur sur demande jusqu’à 50m / Up to 50m on request)
5176
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
59lighting 2018
Profils en plâtre HD à coller et à visser pour éclairage indirect avec source flex LED.Micro Corniche is a high strength plaster profile for indirect linear LED lighting.
MICRO CORNICHES
60 lighting 2018
CALEdesign Atelier Sedap
188 / AILE 189 / LIGNE
187 / CALE190 / DOUCINE
MICRO CORNICHES
50
75
50
35
57
37
57
47
2,8 KG3,5 KG
POIDS
1,20 M1,50 M
LONGUEURDÉSIGNATION
187 CALE Design Atelier Sedap
187.120 Profil droit en plâtre haute dureté
RÉFÉRENCE
187.150 Profil droit en plâtre haute dureté
Équipement flexibles LEDs en option
1,6 KG2 KG
POIDS
1,20 M1,50 M
LONGUEURDÉSIGNATION
188 AILE Design Atelier Sedap
188.120 Profil droit en plâtre haute dureté
RÉFÉRENCE
188.150 Profil droit en plâtre haute dureté
Équipement flexibles LEDs en option
2,4 KG3 KG
POIDS
1,20 M1,50 M
LONGUEURDÉSIGNATION
189 LIGNE Design Atelier Sedap
189.120 Profil droit en plâtre haute dureté
RÉFÉRENCE
189.150 Profil droit en plâtre haute dureté
Équipement flexibles LEDs en option
2 KG2,5 KG
POIDS
1,20 M1,50 M
LONGUEURDÉSIGNATION
190 DOUCINE Design Atelier Sedap
190.120 Profil droit en plâtre haute dureté
RÉFÉRENCE
190.150 Profil droit en plâtre haute dureté
Équipement flexibles LEDs en option
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
61lighting 2018
198 / CORNICHE
62 lighting 2018
CORNICHESdesign Atelier Sedap
Profils en plâtre HD à coller et à visser pour éclairage indirect avec source T5 ou flex LED.Corniche is a high strength plaster profile for indirect T5 or linear LED lighting.
197/CORNICHE 198/CORNICHE
250
80
150
80
199/CORNICHE
11,7 KG8,7 KG
POIDS
2,50 M2,50 M
LONGUEURDÉSIGNATION
197, 198 & 199 CORNICHES Design Atelier Sedap
197 Profil droit en plâtre haute dureté
RÉFÉRENCE
198 Profil droit en plâtre haute dureté
Équipement flexibles LEDs ou T5 en option
7 KG2,50 M199 Profil droit en plâtre haute dureté
80
100
197 / CORNICHE
CORNICHES
194/CORNICHE
130
45
45
190
195/CORNICHE
50
17045
230
191/CORNICHE
130
40
45140
192/CORNICHE
35
45135
130
193/CORNICHE
45
45135
125
6,5 KG8 KG
POIDS
2,50 M
LONGUEURDÉSIGNATION
191-192-193-194-195 CORNICHES Design Atelier Sedap
191 Profil droit en plâtre haute dureté
RÉFÉRENCE
Équipement flexibles LEDs ou T5 en option
192 Profil droit en plâtre haute dureté 2,50 M7,6 KG2,50 M193 Profil droit en plâtre haute dureté8,3 KG194 Profil droit en plâtre haute dureté 2,50 M8,9 KG2,50 M195 Profil droit en plâtre haute dureté
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
63lighting 2018
124 / CORNICHE AUTO-ÉCLAIRANTE
125 / CORNICHE AUTO-ÉCLAIRANTE 126 / CORNICHE AUTO-ÉCLAIRANTE 127 / CORNICHE AUTO-ÉCLAIRANTE
64 lighting 2018
CORNICHES AUTO-ECLAIRANTES
design Atelier Sedap
230
170
176
210
186
169
2,50 M
DÉSIGNATION
125 STYLE EMPIRE Design Atelier Sedap
125 Profil droit staff traditionnel
RÉFÉRENCE LONGUEUR
Corniche livrée en deux éléments
2,50 M
DÉSIGNATION
126 STYLE LOUIS XV Design Atelier Sedap
126 Profil droit staff traditionnel
RÉFÉRENCE LONGUEUR
Corniche livrée en deux éléments
2,50 M
DÉSIGNATION
127 STYLE CLASSIQUE Design Atelier Sedap
127 Profil droit staff traditionnel
RÉFÉRENCE LONGUEUR
Corniche livrée en deux éléments
LEDs et accessoires sur sedap.com / LEDs and accessories at sedap.com
170
190
210
180
230
170
Corniches en plâtre HD en éléments compris entre 1,75 m et 2,50 m, augmentées d’une moulure pour recevoir un profilé aluminium support de LED.High-density plaster cornices, available in elements from 1.75 to 2.50m, with an added molding designed to receive an LED lighting equipment and its aluminium heatsink profile.
140
140
1,75 M
DÉSIGNATION
124 STYLE LOUIS XV Design Atelier Sedap
124 Mini corniche
RÉFÉRENCE LONGUEUR 140
140
240
210
2,50 M
DÉSIGNATION
133 STYLE LOUIS XV Design Atelier Sedap
133 Profil droit staff traditionnel
RÉFÉRENCE LONGUEUR
Corniche livrée en deux éléments
210
240
65lighting 2018
1,25
DÉSIGNATION
99 SUPPORT LED POUR CORNICHES Design Atelier Sedap
99 Profil droit staff traditionnel
RÉFÉRENCE LONGUEUR
À placer sous une corniche pour lerétro-éclairage LED de la corniche.
66 lighting 2018
68 - 103
ENCASTRÉS & SEMI-ENCASTRÉSRECESSED & SEMI-RECESSED LAMPS EINBAULEUCHTEN & HALBEINBAULEUCHTEN EMPOTRADOS & SEMI-EMPOTRADOS INACSSI & SEMI-INCASSI
76-79
72-75
80-81
82-833207/TROCADÉRO DOUBLE 3204/ANTIQAL ROND3206/TROCADÉRO ROND
MINISTAR
3043/TIQAL CARRÉ 3067/TIQAL DOUBLE3065/TIQAL ROND 3066/TIQAL 30°
3073/IPL TBT 12-33072/IPL TBT 12-23071/IPL TBT 12-1
84-85
88-89
90-91
92-93
94-95
86-87
3041/SLOT XL4 3042/SLOT XL5
1966/SLOT
3029/SLOT XL33030/SLOT XL23031/SLOT XL1
1965/SPHÈRE 1967/SQUARE1961/EGG 1962/FLAM
1666/CARRÉ1660/ PETIT ROND
96-97
3205/ANTIQAL DOUBLE
MINI TIQAL
3061/STAR 3062/DIAMANT3060/HAUSSMANN
3202/SLIM SLOT XL 3203/SLIM SLOT XL3201/SLIM SLOT XL3200/SLIM SLOT XL
100-101
98-99
SLIM LINE
MICRO & MINI TIQAL LED
SPOTS COMPACTS 3124/DAG ROND 3125/DAG ELLIPSE
3114/TRAPPE TECH 3117/TRAPPE TECH3115/TRAPPE TECH 3116/TRAPPE TECH
3224/QUADRAT 10 3225/QUADRAT 15
3226/ELLIPSE
102-103
67lighting 2018
68-71SOLEIL LUCIO
MINISTAR
SPOTS
3277 / SOLEIL ROND
SOLEILdesign Fabrice Berrux
68 lighting 2018
Miroir éclairant encsatré en plâtre HD spécialement adaptée aux cloisons sèches. Équipement LED COB IP65. Profondeur d’encastrement de 55 mm.Recessed lighting mirror in high-strength plaster fitting especially designed to be easily recessed in plasterboard ceilings. IP65 LED COB equipment. Recessed dimension 55 mm.
3279 / SOLEIL RECTANGLE
69lighting 2018
3277_24
3277 SOLEIL ROND Design Fabrice Berrux
13 KGIP 65
3277_26 13 KGIP 65
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3278_24
3278 SOLEIL CARRÉ Design Fabrice Berrux
13 KGIP 65
3278_26 13 KGIP 65
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3279_24
3279 SOLEIL RECTANGLE Design Fabrice Berrux
13 KGMiroir éclairant LED - 3 000 °K / 43 W / 3 240 lm Mirror, LED and power supply included
IP 65
3279_26 13 KGMiroir éclairant LED HP - 3 000 °K / 58 W / 6 000 lm IP 65
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
40
SOLEIL : 1/10
1200
1400
1000
1000 600
800
40
1000
600
SOLEIL : 1/10
Vue face Vue coupeø600
1000
ø800
800
40
1000
600
SOLEIL : 1/10
Vue face Vue coupe
501000
SOLEIL : 1/10
800
40
1000
600
SOLEIL : 1/10
800
40
1000
600
1000
501000
800600
40
SOLEIL : 1/10
1200
1400
1000
1000 6001200
501400
12001000
Mirror, LED and power supply included
Mirror, LED and power supply included
Mirror, LED and power supply included
Mirror, LED and power supply included
Mirror, LED and power supply included
Miroir éclairant LED - 3 000 °K / 32 W / 2 376 lm
Miroir éclairant LED - 3 000 °K / 42 W / 4 400 lm
Miroir éclairant LED - 3 000 °K / 23 W / 1 728 lm
Miroir éclairant LED - 3 000 °K / 31 W / 3 200 lm
70 lighting 2018
LUCIOEncastré de plafond en plâtre HD spé-cialement adaptée aux cloisons sèches. Équipement LED. Hauteur d’encastrement de 100 mm.High-density plaster fitting especially de-sogned to be easily recesssed in plaster-board ceilings.
LUCIOdesign Auguste Ajar
LUCIO by Auguste Ajar nous offre la perfection d’un éclairage par lacéra-tion d’un plafond en cloison sèche.La face intérieure rétroéclairée par des LEDs de puissance peut aussi re-cevoir une finition adaptée : peinture Or, Argent, Cuivre ou sur mesure...LUCIO by Auguste Ajar offers us the perfection of an intense experience slicing light into the interior..The interior backlit can also receive a suitable finish: paint Gold, Silver, Copper or custom...
71lighting 2018
3282 LUCIO Design Auguste Ajar
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3282_26 12 KGFlex LEDs / 3 100 ° K / 24V / 38 W / 4 000 lm
Warm white LEDs and power supply included
IP 20
3282_29 Flex LEDs / 2 800 ° K / 24V / 38 W / 4 000 lm
LEDs and power supply included
IP 20 12 KG
3282_31 Flex LEDs / 3 000 ° K / 24V / 52 W / 4 940 lm / IRC > 90
LEDs and power supply included
IP 20 12 KG
3282_32 Flex LEDs / 2 700 ° K / 24V / 52 W / 4 940 lm / IRC > 90
LEDs and power supply included
IP 20 12 KG
1200
270
1059
50
31104
Encastré de plafond en plâtre HD spécialement adaptée aux cloisons sèches. Équipement LED COB. Hauteur d’encastrement de 100 mm.High-strength plaster fitting especially designed to be easily recessed in plasterboard ceilings. LED COB equipment. Recessed dimension 100 mm.
3256 / MINISTAR
72 lighting 2018
MINI STARdesign Atelier Sedap
MINI STARdesign Atelier Sedap
MINISTAR
3256/MINISTAR
3256 MINISTAR Design Atelier Sedap
3256_06
1,5 KG
LED COB - 7,8 W / 3 000 °K / 970 lm / 350mA
RÉFÉRENCE SOURCES Alimentation incluse / Power supply included
3256 / MINISTAR
200
200
ø120
Plus d’informations sur sedap.com / More info on sedap.com
73lighting 2018
Option IP 44Option dimmable : 1-10V ou Push DimSur demande : TRIAC ou DALI
IP 20
74 lighting 2018
Encastrés de plafond en plâtre HD spécialement adaptée aux cloisons sèches. Équipement LED COB. Hauteur d’encastrement de 100 mm.High-strength plaster fitting especially designed to be easily recessed in plasterboard ceilings. LED COB equipment. Recessed dimension 100 mm.
SPOTSdesign Atelier Sedap
& Fabrice Berrux
3258 TROCADÉRO 3257 TRIO 3259 ANGLE
75lighting 2018
3257 TRIO Design Atelier Sedap
3257_06
1,5 KG
LED COB - 7,8 W / 3 000 °K / 970 lm / 350mA
RÉFÉRENCE SOURCES Alimentation incluse / Power supply included
3258 TROCADÉRO Design Fabrice Berrux
3258_06
1,5 KG
LED COB - 7,8 W / 3 000 °K / 970 lm / 350mA
RÉFÉRENCE SOURCES Alimentation incluse / Power supply included
3259 ANGLE Design Atelier Sedap
3259_06
1,5 KG
LED COB - 7,8 W / 3 000 °K / 970 lm / 350mA
RÉFÉRENCE SOURCES Alimentation incluse / Power supply included
Option IP 44Option dimmable : 1-10V ou Push DimSur demande : TRIAC ou DALI
200
200
200
200
200
200
ENCASTRE TROCADERO ENCASTRE ANGLE : 1/1 ENCASTRE TRIO
200
200
ø120
200
200
200
200
200
200
ENCASTRE TROCADERO ENCASTRE ANGLE : 1/1 ENCASTRE TRIO
200
200
ø120
200
200
200
200
200
200
ENCASTRE TROCADERO ENCASTRE ANGLE : 1/1 ENCASTRE TRIO
200
200
ø120
IP 20
IP 20
IP 20
Gamme d’encastrés de plafond en plâtre HD spécialement adaptée aux cloisons sèches. Équipement retrofit au choix (MR16 ou GU10) ou LED COB. Hauteur d’encastrement de 140 mm.High-strength plaster fittings especially designed to be easily recessed in plasterboard ceilings. Retrofit equipment between MR16 and GU10 or LED COB. Recessed dimension 140mm.
3234 / MINI TIQAL 3 SPOTS
76 lighting 2018
MINI TIQALdesign Atelier Sedap
245
245
330160
160
245 160
245
245
245
330160
160
245
315
160
245
245
330160
160
245
220
245
245
245
330160
160
245
160
160
ø55
MINI TIQAL
3233 / MINI TIQAL 3 SPOTS
3231 MINI TIQAL 1 SPOT Design Atelier Sedap
3231_65
1,5 KG
1 spot MR16 (blanc ou noir) - P. maxi 50 W / GX5.3 - Hauteur d’encastrement hors-tout : 100 mm
RÉFÉRENCE SOURCES
3231_75 1 spot GU10 (blanc ou noir) - P. maxi 50 W / GU10 / 230V - Hauteur d’encastrement hors-tout : 122 mm3231_85 1 spot MR16 IP44 (blanc ou noir) - P. maxi 35 W / GX5.3 - Hauteur d’encastrement hors-tout : 119 mm
Ampoule et alimentation non fournies
3231_95 1 spot LED COB IP54 (blanc ou noir) - P. maxi 11,2 W / 1 175 lm / 350mA / 22° / 3 000 °KHauteur d’encastrement hors tout : 140 mm
3232 MINI TIQAL 2 SPOTS Design Atelier Sedap
3232_65
1,5 KG
2 spots MR16 (blanc ou noir) - P. maxi 2 x 50 W / GX5.3 - Hauteur d’encastrement hors-tout : 100 mm
RÉFÉRENCE SOURCES
3232_75 2 spots GU10 (blanc ou noir) - P. maxi 2 x 50 W / GU10 / 230V - Hauteur d’encastrement hors-tout : 122 mm3232_85 2 spots MR16 IP44 (blanc ou noir) - P. maxi 2 x 35 W / GX5.3 - Hauteur d’encastrement hors-tout : 119 mm
Ampoule et alimentation non fournies
3232_95 2 spots LED COB IP54 (blanc ou noir) - P. maxi 2 x 11,2 W / 2 350 °K / 350mA / 22° / 3 000 °K Hauteur d’encastrement hors tout : 140 mm
3233 MINI TIQAL 3 SPOTS Design Atelier Sedap
3233_65
1,5 KG
3 spots MR16 (blanc ou noir) - P. maxi 3 x 50 W / GX5.3 - Hauteur d’encastrement hors-tout : 100 mm
RÉFÉRENCE SOURCES
3233_75 3 spots GU10 (blanc ou noir) - P. maxi 3 x 50 W / GU10 / 230V - Hauteur d’encastrement hors-tout : 122 mm3233_85 3 spots MR16 IP44 (blanc ou noir) - P. maxi 3 x 35 W / GX5.3 - Hauteur d’encastrement hors-tout : 119 mm
Ampoule et alimentation non fournies
3233_95 3 spots LED COB IP54 (blanc ou noir) - P. maxi 3 x 11,2 W / 3 500 lm / 350mA / 22° / 3 000 °K Hauteur d’encastrement hors tout : 140 mm
3234 MINI TIQAL 3 SPOTS Design Atelier Sedap
3234_65
1,5 KG
3 spots MR16 (blanc ou noir) - P. maxi 3 x 50 W / GX5.3 - Hauteur d’encastrement hors-tout : 100 mm
RÉFÉRENCE SOURCES
3234_75 3 spots GU10 (blanc ou noir) - P. maxi 3 x 50 W / GU10 / 230V - Hauteur d’encastrement hors-tout : 122 mm3234_85 3 spots MR16 IP44 (blanc ou noir) - P. maxi 3 x 35 W / GX5.3 - Hauteur d’encastrement hors-tout : 119 mm
Ampoule et alimentation non fournies
3233_95 3 spots LED COB IP54 (blanc ou noir) - P. maxi 3 x 11,2 W / 3 500 lm / 350mA / 22° / 3 000 °K Hauteur d’encastrement hors tout : 140 mm
77lighting 2018
Gamme d’encastrés de plafond en plâtre HD spécialement adaptée aux cloisons sèches. Équipement retrofit au choix (MR16 ou GU10) ou LED COB IP54. High-strength plaster fittings especially designed to be easily recessed in plasterboard ceilings. Retrofit equipment be-tween MR16 and GU10 or LED COB IP54.
3235 / MICRO TIQAL LED
78 lighting 2018
MICRO & MINI TIQAL LEDdesign Atelier Sedap
MICRO & MINI TIQAL LED
3235 MICRO TIQAL LED Design Atelier Sedap
3235_95
0,5 KG
1 spot LED IP40 (blanc) - P. 6 W / 500mA / 390 lm / 3 000 °K / IRC > 80 - Hauteur d’encastrement hors-tout : 153 mm
RÉFÉRENCE SOURCES Alimentation non fournie
3245 MICRO TIQAL MR11 Design Atelier Sedap
3245_75
0,5 KG
1 spot MR16 IP44 (blanc ou noir) - P. maxi 35 W / GXU4 - Hauteur d’encastrement hors-tout : 91 mm
RÉFÉRENCE SOURCES
3245_95 1 spot LED IP40 (blanc ou noir) - P. 6 W / 500mA / 390 lm / 3 000 °K / IRC > 80 - Hauteur d’encastrement hors-tout : 132 mm
Ampoule et alimentation non fournies
3246 MICRO TIQAL MR11 ORIENTABLE Design Atelier Sedap1,0 KGRÉFÉRENCE SOURCES Ampoule et alimentation non fournies
3241 MINI TIQAL ORIENTABLE Design Atelier Sedap
3241_65
1,0 KG
1 spot MR16 IP20 (blanc ou noir) - GU5.3 - Hauteur d’encastrement hors-tout : 96 mm
RÉFÉRENCE SOURCES
3241_75 1 spot GU10 IP20 (blanc ou noir) - Hauteur d’encastrement hors-tout : 116 mm3241_95 1 spot LED IP20 (blanc ou noir) - P. 11,2 W / 350mA / 1175 lm / 3 000 °K / IRC > 85 - Hauteur d’encastrement hors-tout : 120 mm
Ampoule et alimentation non fournies
3241 / MINI TIQAL ORIENTABLE
110
86
110
13
ø30
ø40110
110
4013
160
160
ø60
4313
160
160
ø80
4613
3246_65 1 spot MR16 IP20 (blanc) - P. maxi 35 W / GXU4 - Hauteur d’encastrement hors-tout : 85 mm3246_95 1 spot LED IP20 (blanc) - P. 11,2 W / 350mA / 1175 lm / 3 000 °K / IRC > 85 - Hauteur d’encastrement hors-tout : 120 mm
79lighting 2018
3229 / ENCASTRÉ SIMPLE 3230 / ENCASTRÉ DOUBLE
Collection de spots en plâtre haute dureté pour équipement MR16, GU10 ou LED COB.Collection of high-strength plaster downlights for MR16, GU10 or LED COB equipments.
SOURCES
3229 & 3230 SPOTS ENCSATRÉS COMPACTS Design Atelier SedapRÉFÉRENCE
69
315
460
145
3230 / ENCASTRÉ DOUBLE
Hauteur d’encastrement hors-tout : 165 mm
3229_05 1 spot orientable MR16 (blanc ou noir inclus) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)3229_07 1 spot orientable GU10 (blanc ou noir inclus) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)
3229_06 1 spot fixe LED COB IP65 (blanc inclus) - P. maxi 9 W / 200mA / 650 lm / 55° / IRC > 80 - (Alimentation incluse)
3230_05 2 spots orientables MR16 (blanc ou noir inclus) - P. maxi 2 x 50 W / GX5.3 - (Ampoules et alimentation non fournies)3230_07 2 spots orientables GU10 (blanc ou noir inclus) - P. maxi 2 X 50 W / GU10 / 230V - (Ampoules non fournies)
3230_06 2 spots fixes LED COB IP65 (blanc inclus) - P. maxi 2 x 9 W / 200mA / 2 x 650 lm / 55° / IRC > 80 - (Alimentation incluse)
315
315
70
69
80 lighting 2018
SPOTS ENCASTRÉS COMPACTS
design Atelier Sedap
3229_26 1 spot orientable LED COB 350mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP / (alimentation non fournie)3229_16 1 spot orientable LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
3230_26 2 spots orientables LED COB 350mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP / (alimentation non fournie)3230_16 2 spots orientables LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
Gamme de plafonniers semi-encastrés en plâtre HD, pour installation collée en recouvrement (sans raccordement joint plâtre).Range of high-strength plaster lighting fixtures, for a semi-recessed mounting (with acrylic glue-without plaster jointing).
DAG
3125 / DAG ELLIPSE
290
175
135
ø265
70
ø265
3124 / DAG ROND
3124 DAG ROND Design Atelier Sedap
3124_05
1,5 KG
1 spot orientable MR16 (blanc) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)
RÉFÉRENCE SOURCES
Semi-encastré / Semi-recessed mounting
Hauteur d’encastrement hors-tout : 160 mm
3125 DAG ELLIPSE Design Atelier Sedap
3125_05
1,5 KG
1 spot orientable MR16 (blanc) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)
RÉFÉRENCE SOURCES
Semi-encastré / Semi-recessed mounting
3124_07 1 spot orientable GU10 (blanc) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)
Hauteur d’encastrement hors-tout : 200 mm
3125_07 1 spot orientable GU10 (blanc) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)
81lighting 2018
DAGdesign Atelier Sedap
3124_26 1 spot orientable LED COB 350mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP / (alimentation non fournie)3124_16 1 spot orientable LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
3125_26 1 spot orientable LED COB 350mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP / (alimentation non fournie)3125_16 1 spot orientable LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
3206 / TROCADÉRO ROND
Encastrés en plâtre HD pour équipement MR16, GU10 ou LED COB. Gamme spécialement adaptée aux plafonds.
High strength plaster recessed fittings, with MR16,GU10 or LED COB equipments, es-pecially designed for ceil-ings.
3207 / TROCADÉRO DOUBLE
3206 TROCADÉRO ROND Design Fabrice BerruxRÉFÉRENCE SOURCES
3207 TROCADÉRO DOUBLE Design Fabrice BerruxRÉFÉRENCE SOURCES
1,5 KGHauteur d’encastrement hors-tout : 200 mm
2,5 KGHauteur d’encastrement hors-tout : 200 mm
3206_05 1 spot orientable MR16 (blanc) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)3206_07 1 spot orientable GU10 (blanc) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)
3207_05 2 spots orientables MR16 (blanc) - P. maxi 2 x 50 W / GX5.3 - (Ampoules et alimentation non fournies)3207_07 2 spots orientables GU10 (blanc) - P. maxi 2 X 50 W / GU10 / 230V - (Ampoules non fournies)
110
200
ø 122
340
340
ø122
200 110
ø 122
110200
340
460
340
460
ø122
200 110
82 lighting 2018
TROCADÉROdesign Fabrice Berrux
3206_26 1 spot orientable LED COB 350mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP / (alimentation non fournie)3206_16 1 spot orientable LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
3207_26 2 spots orientables LED COB 350mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP / (alimentation non fournie)3207_16 2 spots orientables LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
200
460
200
3205 / ANTIQAL DOUBLE
3204 / ANTIQAL ROND
TROCADÉRO & ANTIQAL
3204 ANTIQAL ROND Design Auguste AjarRÉFÉRENCE SOURCES
3205 ANTIQAL DOUBLE Design Auguste AjarRÉFÉRENCE SOURCES
1,5 KGHauteur d’encastrement hors-tout : 180 mm
2,5 KGHauteur d’encastrement hors-tout : 180 mm
3204_05 1 spot orientable MR16 (blanc) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)3204_07 1 spot orientable GU10 (blanc) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)
3204_06 1 spot fixe LED COB IP65 (blanc) - P. maxi 9 W / 200mA / 650 lm / 55° / IRC > 80 - (Alimentation incluse)
3205_05 2 spots orientables MR16 (blanc) - P. maxi 2 x 50 W / GX5.3 - (Ampoules et alimentation non fournies)3205_07 2 spots orientables GU10 (blanc) - P. maxi 2 X 50 W / GU10 / 230V - (Ampoules non fournies)
3205_06 2 spots fixes LED COB IP65 (blanc) - P. maxi 2 x 9 W / 200mA / 2 x 650 lm / 55° / IRC > 80 - (Alimentation incluse)
306
306
122
100
4
306
306
122
180
F INIT IONS
S OUR C E S L UMINE US E S
306
435
122
100
4
306
435
122
180
83lighting 2018
ANTIQALdesign Auguste Ajar
Encastrés en plâtre HD pour équipement MR16, GU10 ou LED COB. Gamme spécialement adaptée aux plafonds.
High strength plaster recessed fittings, with MR16, GU10 or LED COB equipments, espe-cially designed for ceilings.
3204_26 1 spot orientable LED COB 350mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP / (alimentation non fournie)3204_16 1 spot orientable LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
3205_26 2 spots orientables LED COB 350mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP/ (alimentation non fournie)3205_16 2 spots orientables LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
3067 / TIQAL DOUBLE
Encastrés en plâtre HD pour équipement MR16, GU10 ou LED COB. Gamme spécialement adaptée aux plafonds.High strength plaster recessed fittings, with MR16, GU10 or LED COB equipments, especially designed for ceilings.
3043 / TIQAL CARRÉ 3065 / TIQAL ROND 3066 / TIQAL 30°
3067 / TIQAL DOUBLE
84 lighting 2018
TIQALdesign Atelier Sedap
3067 / TIQAL DOUBLE
TIQALdesign Atelier Sedap
TIQAL
250
210
60°
65 int.
142
210
330
110
65 int.
65 int.
210
210
110
210
210
6.5 int.
110
3043 TIQAL CARRÉ Design Atelier Sedap
3043_05
1,5 KG
1 spot orientable MR16 (blanc ou noir inclus) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)
RÉFÉRENCE SOURCES
3043_07 1 spot orientable GU10 (blanc ou noir inclus) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)
3043_06 1 spot fixe LED COB IP65 (blanc inclus) - P. maxi 9 W / 200mA / 650 lm / 55° / IRC > 80 - (Alimentation incluse)
Hauteur d’encastrement hors-tout : 165 mm
3065 TIQAL ROND Design Atelier Sedap
3065_05
1,5 KG
1 spot orientable MR16 (blanc ou noir inclus) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)
RÉFÉRENCE SOURCES
3065_07 1 spot orientable GU10 (blanc ou noir inclus) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)
3065_06 1 spot fixe LED COB IP65 (blanc inclus) - P. maxi 9 W / 200mA / 650 lm / 55° / IRC > 80 - (Alimentation incluse)
Hauteur d’encastrement hors-tout : 165 mm
3066 TIQAL 30° Design Atelier Sedap
3066_05
1,5 KG
1 spot orientable MR16 (blanc ou noir inclus) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)
RÉFÉRENCE SOURCES
3066_07 1 spot orientable GU10 (blanc ou noir inclus) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)
Hauteur d’encastrement hors-tout : 190 mm
3067 TIQAL DOUBLE Design Atelier Sedap
3067_05
1,5 KG
2 spots orientables MR16 (blanc ou noir inclus) - P. maxi 2 x 50 W / GX5.3 - (Ampoules et alimentation non fournies)
RÉFÉRENCE SOURCES
3067_07 2 spots orientables GU10 (blanc ou noir inclus) - P. maxi 2 x 50 W / GU10 / 230V - (Ampoules non fournies)
Hauteur d’encastrement hors-tout : 165 mm
85lighting 2018
3043_26 1 spot orientable LED COB 350mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP / (alimentation non fournie)3043_16 1 spot orientable LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
3065_26 1 spot orientable LED COB 350mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP / (alimentation non fournie)3065_16 1 spot orientable LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
3066_26 1 spot orientable LED COB 350mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP / (alimentation non fournie)3066_16 1 spot orientable LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
3067_26 2 spots orientables LED COB 350mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP / (alimentation non fournie)3067_16 2 spots orientables LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
3066_06 1 spot fixe LED COB IP65 (blanc inclus) - P. maxi 9 W / 200mA / 650 lm / 55° / IRC > 80 - (Alimentation incluse)
3067_06 1 spot fixe LED COB IP65 (blanc inclus) - P. maxi 9 W / 200mA / 650 lm / 55° / IRC > 80 - (Alimentation incluse)
3060 / HAUSSMANN
3062 / DIAMANT3060 / HAUSSMANN 3061 / STAR
Encastrés en plâtre HD pour équipement MR16, GU10 ou LED COB. Gamme spécialement adaptée aux plafonds.High strength plaster recessed fittings, with MR16, GU10 or LED COB equipments, especially designed for ceilings.
86 lighting 2018
HAUSSMANNSTAR
DIAMANTdesign Atelier Sedap
3061 / STAR 3062 / DIAMANT
HAUSSMANN, STAR & DIAMANT
380
440
88
3060 HAUSSMANN Design Atelier Sedap1,5 KGRÉFÉRENCE SOURCES Hauteur d’encastrement hors-tout : 160 mm
3061 STAR Design Atelier Sedap1,5 KGRÉFÉRENCE SOURCES
3062 DIAMANT Design Atelier Sedap1,5 KGRÉFÉRENCE SOURCES
280
280
93
195
240
65
240
183
3060_05 1 spot orientable MR16 (blanc ou noir) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)3060_07 1 spot orientable GU10 (blanc ou noir) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)
3060_06 1 spot fixe LED COB IP65 (blanc) - P. maxi 9 W / 200mA / 650 lm / 55° / IRC > 80 - (Alimentation incluse)
Hauteur d’encastrement hors-tout : 180 mm
Hauteur d’encastrement hors-tout : 185 mm
3061_05 1 spot orientable MR16 (blanc ou noir) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)3061_07 1 spot orientable GU10 (blanc ou noir) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)
3061_06 1 spot fixe LED COB IP65 (blanc) - P. maxi 9 W / 200mA / 650 lm / 55° / IRC > 80 - (Alimentation incluse)
3062_05 1 spot orientable MR16 (blanc ou noir) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)3062_07 1 spot orientable GU10 (blanc ou noir) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)
3062_06 1 spot fixe LED COB IP65 (blanc) - P. maxi 9 W / 200mA / 650 lm / 55° / IRC > 80 - (Alimentation incluse)
87lighting 2018
3060_26 1 spot orientable LED COB 350mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP / (alimentation non fournie)3060_16 1 spot orientable LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
3061_26 1 spot orientable LED COB 350mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP / (alimentation non fournie)3061_16 1 spot orientable LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
3062_26 1 spot orientable LED COB 350mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP / (alimentation non fournie)3062_16 1 spot orientable LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
3071 / IPL TBT 12-1 - 3072 / IPL TBT 12-2
Encastrés en plâtre HD pour équipement LED COB, MR ou GU10. Gamme spécialement adaptée aux plafonds.High strength plaster recessed fittings, with LED COB, MR16 or GU10 equipments, especially designed for ceilings.
3073 / IPL TBT 12-33071 / IPL TBT 12-1 3072 / IPL TBT 12-2
88 lighting 2018
IPL TBT 12design Atelier Sedap
3073 / IPL TBT 12-3
IPL 12
Plus d’informations et photométrie sur sedap.com / More data and photometry available at sedap.com
3071 IPL TBT 12-1 Design Atelier Sedap2,0 KGRÉFÉRENCE SOURCES Hauteur d’encastrement hors-tout : 160 mm
3072 IPL TBT 12-2 Design Atelier Sedap3,0 KGRÉFÉRENCE SOURCES Hauteur d’encastrement hors-tout : 160 mm
3073 IPL TBT 12-3 Design Atelier Sedap3,7 KGRÉFÉRENCE SOURCES Hauteur d’encastrement hors-tout : 160 mm
3071_05 1 spot orientable MR16 (blanc ou noir) - P. maxi 50 W / GX5.3 - (Ampoule et alimentation non fournies)3071_07 1 spot orientable GU10 (blanc ou noir) - P. maxi 50 W / GU10 / 230V - (Ampoule non fournie)
3071_06 1 spot fixe LED COB IP65 (blanc) - P. maxi 9 W / 200mA / 650 lm / 55° / IRC > 80 - (Alimentation incluse)
3072_05 2 spots orientables MR16 (blanc ou noir) - P. maxi 2 x 50 W / GX5.3 - (Ampoules et alimentation non fournies)3072_07 2 spots orientables GU10 (blanc ou noir) - P. maxi 2 x 50 W / GU10 / 230V - (Ampoules non fournies)
3072_06 2 spots fixes LED COB IP65 (blanc) - P. maxi 2 x 9 W / 200mA / 1 300 lm / 55° / IRC > 80 - (Alimentation incluse)
3073_05 3 spots orientables MR16 (blanc ou noir) - P. maxi 3 x 50 W / GX5.3 - (Ampoules et alimentation non fournies)3073_07 3 spots orientables GU10 (blanc ou noir) - P. maxi 3 x 50 W / GU10 / 230V - (Ampoules non fournies)
3073_06 3 spots fixes LED COB IP65 (blanc) - P. maxi 3 x 9 W / 200mA / 1 950 lm / 55° / IRC > 80 - (Alimentation incluse)
89lighting 2018
3071_26 1 spot orientable LED COB 350mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP / (alimentation non fournie)3071_16 1 spot orientable LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
3072_26 2 spots orientables LED COB 350mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP / (alimentation non fournie)3072_16 2 spots orientables LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
3073_26 3 spots orientables LED COB 350mA / 36° / 12,2 W / 1 170 lm / 3 000 °K / IRC > 90 / gradable DALI - 1-10V - BP / (alimentation non fournie)3073_16 3 spots orientables LED COB 230/240V / 36° / 9,5 W / 760 lm / 3 000 °K / IRC > 90 / gradable TRIAC
220
220
120 int.
60 int.
120 int.
220
340
120 int.
60 int.
240 int.
220
420
120 int.
60 int.
320 int.
Trappes techniques en plâtre HD pour encastrement plafond. Passe cable permettant un accès facile aux alimentations .Recessed technical hatch for ceilings. Cable gland for easy access to power supplies.
3117 / TRAPPE TECHNIQUE
90 lighting 2018
TRAPPES TECHNIQUESdesign Atelier Sedap
TRAPPES TECHNIQUES
3114 / TRAPPE TECHNIQUE
3114 3115
3116 3117
3114 / TRAPPE TECHNIQUE
200 x 200 MM 1,0 KG
DIMENSIONS POIDSDÉSIGNATION
3114, 3115, 3116 & 3117 TRAPPES TECHNIQUES Design Atelier Sedap
3114 Trappe technique
RÉFÉRENCE
200 x 200 MM 1,0 KG3115 Trappe technique200 x 200 MM 1,0 KG3116 Trappe technique200 x 200 MM 1,0 KG3117 Trappe technique
200
200
65 int.
3114 3115
3116 3117
ø120
91lighting 2018
100
Hauteur d’encastrement hors-tout : 100 mm
QUADRAT(3224-3225)
Gamme d’encastrés de mur en plâtre HD spécialement adapté aux cloisons sèches. Equipement LED HP 230V - 3000°K. Driver extractible (fixation magnétique).High-strength plaster fittings especially designed to be recessed in plasterboard walls. High power LED equipment – Power supply 230V - 3000°K. Extractable driver (magnets).
3225 / QUADRAT 15
92 lighting 2018
QUADRATdesign Atelier Sedap
QUADRAT
3225 / QUADRAT 153224 / QUADRAT 10
56
150 270100 220
56
3224 & 3225 QUADRAT 10 & 15 Design Atelier Sedap
3224_06
1,0 KG
3 000 °K / 3,2 W / 230V / 440 lm / 350mA / IRC > 80 - Equipement non dimmable / Non dimmable equipment
RÉFÉRENCE SOURCES
3225_06 3 000 °K / 6,2 W / 230V / 750 lm / 350mA / IRC > 80 - Equipement non dimmable / Non dimmable equipment
LEDs et alimentation extractible incluses / LEDs and extractable power supply included
Option dimmable : 1-10V ou Push Dim
3224 / QUADRAT 10 3225 / QUADRAT 15
3224 / QUADRAT 10 3225 / QUADRAT 15
255 305 150
100
56 56
93lighting 2018
93
90
255
1
29
175 55 160 242
305
150
1
25
55
Pour 3225 : sur demande TRIAC ou DALI
Encastrés en plâtre HD pour 2 LEDs high power. Slim Slot XL est une gamme d’épaisseur 55 mm spécialement adaptée aux cloisons en plaque de plâtre.High strength plaster recessed fittings, equiped with 2 high power 350mA LEDs, especially designed for plasterboard walls (55 mm deep).
3200 3201 3202 3203 / SLIM SLOT XL
94 lighting 2018
SLIM SLOT XLdesign Atelier Sedap
Alimentation LED dimmable 1-10V ou Push Dim multi-amp (12V / 10 W)011030097
SLIM SLOT XL
3201/SLIM SLOT XL
3203/SLIM SLOT XL 3201, 3200, 3202 & 3203
3200 3201 3202 3203
25
30
0
160
390
160
278
25
20
0
55160
160
25
45730
0
25
20
0
360
3200, 3201, 3202, 3203 & 3226 SLIM SLOT XL Design Atelier Sedap
3200_WW3 2 KG2 700 °K / 2 LEDs highbrightness / 350mA / 2 W / 264 lm ou 500mA / 3 W / 320 lm
RÉFÉRENCE SOURCES
3201_WW3 2 700 °K / 2 LEDs highbrightness / 350mA / 2 W / 264 lm ou 500mA / 3 W / 320 lm 3202_WW3 2 700 °K / 2 LEDs highbrightness / 350mA / 2 W / 264 lm ou 500mA / 3 W / 320 lm
2 KG
3203_WW3 2 700 °K / 2 LEDs highbrightness / 350mA / 2 W / 264 lm ou 500mA / 3 W / 320 lm 3226_WW3 2 700 °K / 2 LEDs highbrightness / 350mA / 2 W / 264 lm ou 500mA / 3 W / 320 lm
Alimentation LED non-dimmable multi-amp (350mA / 15 W ou 500mA / 20 W)011030103
POIDS
3226/SLOT XL ELLIPSE
2 KG2 KG2 KG
40
190
160
360
3226
95lighting 2018
Sur demande : DALI
Encastrés en plâtre HD pour 2 LEDs high power. Slot est une gamme d’épaisseur 50 mm spécialement adaptée aux cloisons en plaque de plâtre.High strength plaster recessed fittings, equiped with 2 high power 350mA LED, especially designed for plasterboard walls (50 mm deep).
3030 / SLOT XL2
3041/SLOT XL4 3042/SLOT XL53029/SLOT XL33030/SLOT XL23031/SLOT XL1
96 lighting 2018
SLOT XLdesign Atelier Sedap
3030 / SLOT XL3
50
560 400
160
60
50
780 600
160
60
160
410 250
6050
160
330 170
6050
160
245 85
6050
Plus d’informations et photométrie sur sedap.com / More data and photometry available at sedap.com
SLOT XL
3031 SLOT XL1 Design Atelier Sedap
3031_WW3
1,0 KG
2 700 °K / 2 LEDs highbrightness / 350mA/2 W/ 264 lm ou 500mA/3 W/320 lm / Circuit / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
Alimentation LED dimmable 1-10V ou Push Dim multi-amp (12V / 10 W)011030097Alimentation LED non-dimmable multi-amp (350mA / 15 W ou-500mA / 20 W)011030103
3030 SLOT XL2 Design Atelier Sedap
3030_WW3
1,6 KG
2 700 °K / 2 LEDs highbrightness / 350mA/2 W/264 lm ou 500mA/3 W/320 lm / Circuit / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
Alimentation LED dimmable 1-10V ou Push Dim multi-amp (12V / 10 W)011030097Alimentation LED non-dimmable multi-amp (350mA / 15 W ou-500mA / 20 W)011030103
3029 SLOT XL3 Design Atelier Sedap
3029_WW3
2,0 KG
2 700 °K / 2 LEDs highbrightness / 350mA/2 W/264 lm ou 500mA/3 W/320 lm / Circuit / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
Alimentation LED dimmable 1-10V ou Push Dim multi-amp (12V / 10 W)011030097Alimentation LED non-dimmable multi-amp (350mA / 15 W ou-500mA / 20 W)011030103
3041 SLOT XL4 Design Atelier Sedap
3041_WW3
2,0 KG
2 700 °K / 2 LEDs highbrightness / 350mA/2 W/264 lm ou 500mA/3 W/320 lm / Circuit / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
Alimentation LED dimmable 1-10V ou Push Dim multi-amp (12V / 10 W)011030097Alimentation LED non-dimmable multi-amp (350mA / 15 W ou 500mA / 20 W)011030103
3042 SLOT XL5 Design Atelier Sedap
3042_WW3
3,3 KG
2 700 °K / 2 LEDs highbrightness / 350mA/2 W/264 lm ou 500mA/3 W/320 lm / Circuit / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
Alimentation LED dimmable 1-10V ou Push Dim multi-amp (12V / 10 W)011030097Alimentation LED non-dimmable multi-amp (350mA / 15 W ou 500mA / 20 W)011030103
97lighting 2018
Sur demande : DALI
Sur demande : DALI
Sur demande : DALI
Sur demande : DALI
Sur demande : DALI
3030 / SLOT XL3
1966 / SLOT1965 / SPHÈRE 1967 / SQUARE 1961 / EGG 1962 / FLAM
1961 / EGG
Encastrés en plâtre HD pour équipement LEDs 12V. Gamme d’épaisseur 50 mm spécialement adaptée aux cloisons en plaque de plâtre.High strength plaster recessed fittings, equiped with 12V LEDs, especially designed for plasterboard walls (50 mm deep).
EGG, FLAM, SPHÈRE, SLOT & SQUARE
98 lighting 2018
EGGdesign Atelier Sedap
1966 / SLOT
EGG, FLAM, SPHÈRE, SLOT & SQUARE
50
140
260
100
100
140
160
40
320
50
160
270
ø120
50
140
375 245
5040
155
270
80
150
50
Plus d’informations et photométrie sur sedap.com / More data and photometry available at sedap.com
Alimentation LED dimmable 1-10V ou Push Dim multi-amp (12V / 10 W)011030097
1961 EGG Design Atelier Sedap
1961_14
0,8 KG
2 700 °K / 8 LEDs highbrightness / maxi 1,2 W / 12V / 100 lm / Circuit inclus / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
Alimentation LED dimmable 1-10V ou Push Dim multi-amp (12V / 10 W)011030097
1962 FLAM Design Atelier Sedap
1962_14
0,8 KG
2 700 °K / 8 LEDs highbrightness / maxi 1,2 W / 12V / 100 lm / Circuit inclus / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
Alimentation LED dimmable 1-10V ou Push Dim multi-amp (12V / 10 W)011030097
1965 SPHÈRE Design Atelier Sedap
1965_14
0,8 KG
2 700 °K / 8 LEDs highbrightness / maxi 1,2 W / 12V / 100 lm / Circuit inclus / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
Alimentation LED dimmable 1-10V ou Push Dim multi-amp (12V / 10 W)011030097
1966 SLOT Design Atelier Sedap
1966_14
0,8 KG
2 700 °K / 8 LEDs highbrightness / maxi 1,2 W / 12V / 100 lm / Circuit inclus / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
Alimentation LED dimmable 1-10V ou Push Dim multi-amp (12V / 10 W)011030097
1967 SQUARE Design Atelier Sedap
1967_14
0,8 KG
2 700 °K / 8 LEDs highbrightness / maxi 1,2 W / 12V / 100 lm / Circuit inclus / Dimmable (1-10V ou PushDim)
RÉFÉRENCE SOURCES
1966 / SLOT
99lighting 2018
Encastrés en plâtre HD et diffusant PMMA satiné (77%) pour sources LED.Gamme d’épaisseur 55 mm spécialement adaptée aux cloisons en plaque de plâtre.High strength plaster and satin PMMA diffusor (77%) recessed fittings, with LED lighting, especially de-signed for plasterboard walls (55 mm deep).
1662 / GRAND ROND
100 lighting 2018
ROND CARRÉdesign Atelier Sedap
1660/PETIT ROND 1666/CARRÉ
1666 / CARRÉ
ROND & CARRÉ
230
100
140 55
270 55
370
20
0
200
Plus d’informations et photométrie sur sedap.com / More data and photometry available at sedap.com
1660 PETIT ROND Design Atelier Sedap
1660_24
1,5 KG
3 000 °K / 7,5 W / 930 lm / 350mA / Equipement non dimmable / Non dimmable equipment
RÉFÉRENCE SOURCES
1660_26 3 000 °K / 7,5 W / 930 lm / 350mA / Equipement dimmable 1-10V ou Push Dim / Dimmable equipment
LEDs et alimentation incluses / LEDs and power supply included
Option dimmable DALI
1666 CARRÉ Design Atelier Sedap
1666_24
3,5 KG
3 000 °K / 8,9 W / 1 360 lm / 350mA ou 13,3 W / 1 860 lm / 500mA / Driver multiwatt
RÉFÉRENCE SOURCES
1666_26 3 000 °K / 8,9 W / 1 360 lm / 350mA ou 13,3 W / 1 860 lm / 500mA / Driver multiwatt gradable (1-10V, Push Dim ou DALI)
LEDs et alimentation incluses / LEDs and power supply included
lighting 2018 101
Encastrés mur et plafond en plâtre HD pour Flex LEDs high power. Slim Line est une gamme d’épaisseur 35 mm spécialement adaptée aux cloisons en plaque de plâtre.High strength plaster recessed fittings, equiped with high power LEDs, especially designed for plasterboard walls and ceilings (35 mm deep).
789 / SLIM LINE
lighting 2018102
SLIM LINEdesign Atelier Sedap
SLIM LINE
LONGUEUR
Alimentation 24V / 30 W / Power supply 24V 30 W (160 x 46 x 30 mm)Alimentation 24V / 100 W / Power supply 24V 100 W (200 x 67 x 34 mm)
011030062011030050
1,08 M0,58 M
788 & 789 SLIM LINE Design Atelier Sedap
788 HP LEDs 9,6 W / 24V - 1 000 lm - Diffuseur inclus / Diffuser included
RÉFÉRENCE SOURCES
789 HP LEDs 19,2 W / 24V - 2 000 lm - Diffuseur inclus / Diffuser included
Sans alimentation / Power supply not included
788 / SLIM LINE
788 / SLIM LINE 789 / SLIM LINE
lighting 2018 103
3550
5
580
25
100
3510
05
1080
25
100
Instructions de pose «Système Blade» page 226 / Mounting instructions on page 226
106 - 165 APPLIQUESWALL LAMPS WANDLEUCHTEN APLIQUES APPLIQUES
110-1113263/RUCHE3215/FALDA
106-1073286/SIMPLE3265/SIMPLE
1933/EDGE 62
1930/EDGE 20 1931/EDGE 28 1932/EDGE 32
1934/EDGE 92 1935/EDGE 122
3024/SUCRE 60 3023/SUCRE 90 3022/SUCRE 120 3074/SUCRE LED 30 3075/SUCRE LED 60
3079/FORMAT PM 3133/FORMAT GM
112-113
114-117
118-119
122-125
126-127
128-129
3223/ANA
3140/TROCADÉRO 30 3141/TROCADÉRO 60 3142/MÉRIDIEN 30 3143/MÉRIDIEN 60
3272/PERLES
108-109
1732/BRIC 3055/SAQQARA
3057/DÉ
lighting 2018104
120-121
164-165
3077/AGRAFE 3078/AGRAFFE
1311 13331317 1339
3220/AGRAFE 90
130-131
138-139
136-137
140-141
142-145
132-135
1444 14451357 1523
1442 1465 1738
1562 1563 1564
1818
1809/PLÂTRE & VERRE 1817/PLÂTRE & VERRE
1707/OCÉAN 3083/SUCRE 60 IP44 3084/SUCRE 90 IP44
1549/ÉTOILES
1810/CHATS 1813/LAPIN 1814/NOUNOURS
1380/CHARME 1543/CHÊNE 1836/FEUILLE
1819/TORTUE
3132/BISCUIT CARRÉ3131/BISCUIT ROND
1427 1486 1487 18173032/LIA
3010/VANILLE1711/VANILLE 3082/VANILLE FLUO
1871/TOMTOM 3104
146-147
148-149
150-151
152-155
156-157
158-159
160-161
17401739 1741
1730 174517441743
3015/LIGHT
lighting 2018 105
3264/NUAGE
162-163
164-165
lighting 2018106
SIMPLEdesign Auguste Ajar
#hautedefinition #matiere #sculptural #minimalist #engineeredrefinement #castHaute définition de la matière sculptée (motif horizontal ou vertical) pour un éclairage Indirect ou Direct/Indirect LED de puissance.
High definition #casting # direct / indirect LED wash lighting.
3285/SIMPLE VERTICAL D/I
lighting 2018 107
SIMPLE VERTICAL : 1/10 SIMPLE HORIZONTAL : 1/10
602
390
80
42
50 602
80
42
390
50
Vue dessus
Vue face
Vue profil Vue profil
600
80
40
90SIMPLE VERTICAL : 1/10 SIMPLE HORIZONTAL : 1/10
602
390
80
42
50 602
80
42
390
50
Vue dessus
Vue face
Vue profil Vue profil
600
80
40
90
3265 SIMPLE VERTICAL I Design Auguste Ajar
3265_06 LED COB - 18,4 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80 IP 20
LEDs et alimentation incluses / LEDs and power supply included
RÉFÉRENCE SOURCES CARACTÉRISTIQUES ORIENTATION
3265_06.V2LED COB - 18,4 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable DALI / PushDim / R2M
3266 SIMPLE HORIZONTAL I Design Auguste Ajar
3266_06 LED COB - 18,4 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80 IP 20
LEDs et alimentation incluses / LEDs and power supply included
RÉFÉRENCE SOURCES CARACTÉRISTIQUES ORIENTATION
3266_06.V2LED COB - 18,4 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable DALI / PushDim / R2M
3285 SIMPLE VERTICAL D/I Design Auguste Ajar
3285_06 LED COB - 2 x 18,4 W / 400mA / 3 000 °K / 5 720 lm / IRC > 80
Diffuseur supérieur et inférieur en PMMA satiné / Top and bottom satin PMMA diffusor
IP 20
LEDs et alimentation incluses / LEDs and power supply included
RÉFÉRENCE SOURCES CARACTÉRISTIQUES ORIENTATION
3285_06.V2LED COB - 2 x 18,4 W / 400mA / 3 000 °K / 5 720 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable DALI / PushDim / R2M
3286 SIMPLE HORIZONTAL D/I Design Auguste Ajar
3286_06 LED COB - 2 x 18,4 W / 400mA / 3 000 °K / 5 720 lm / IRC > 80
Diffuseur supérieur et inférieur en PMMA satiné / Top and bottom satin PMMA diffusor
IP 20
LEDs et alimentation incluses / LEDs and power supply included
RÉFÉRENCE SOURCES CARACTÉRISTIQUES ORIENTATION
3286_06.V2LED COB - 2 x 18,4 W / 400mA / 3 000 °K / 5 720 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable DALI / PushDim / R2M
SIMPLE
SIMPLE VERTICAL : 1/10 SIMPLE HORIZONTAL : 1/10
602
390
80
42
50 602
80
42
390
50
Vue dessus
Vue face
Vue pro�l Vue pro�l
SIMPLE VERTICAL : 1/10 SIMPLE HORIZONTAL : 1/10
602
390
80
42
50 602
80
42
390
50
Vue dessus
Vue face
Vue pro�l Vue pro�l
600
50
40
90
600
50
40
90
3265/SIMPLE VERTICAL I 3286/SIMPLE HORIZONTAL D/I
lighting 2018
Gamme d’appliques architecturales en plâtre HD, éclairage indirect, équipement LED HP.High strength plaster wall lamps, indirect lighting, high powered LED equipment.
108
PERLESdesign Fabrice Berrux
lighting 2018 109
Ø70
636 110
630 110
70
PERLES
3272 PERLES Design Fabrice Berrux
3272_06 LED COB - 18,4 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80 IP 20
LEDs et alimentation incluses / LEDs and power supply included
RÉFÉRENCE SOURCES CARACTÉRISTIQUES ORIENTATION
3272_06.V2LED COB - 18,4 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable DALI / PushDim / R2M
lighting 2018110
FALDADesign Itamar Harari
Applique architecturale en plâtre HD, éclairage direct et indirect, équipement LED HP.High strength plaster wall lamp, direct and indirect lighting, high powered LED equipment.
370 110
90
3215_06 LED COB - 2 x 9,2 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80
Diffuseur inférieur en PMMA satiné / Bottom satin PMMA diffusor
3215 FALDA Design Itamar Harari
IP 20
LEDs et alimentation incluses / LEDs and power supply included
RÉFÉRENCE SOURCES CARACTÉRISTIQUES ORIENTATION
3215_06.V1LED COB - 2 x 9,2 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable 1-10V
3215_06.V2LED COB - 2 x 9,2 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable DALI / PushDim / R2M
lighting 2018
Applique architecturale en plâtre HD, éclairage direct et indirect, équipement LED HP.High strength plaster wall lamp, direct and indirect lighting, high powered LED equipment.
111
RUCHEDesign Bruno Houssin
277
100
20
208
280 210
100
277
100
20
208
3263 RUCHE applique Design Bruno Houssin
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION3263_06 LED COB - 23,4 W / 3 000 °K / 500mA / 2 910 lm / IRC > 80 1 KGIP 20 850°C
Option dimmable : DALI / PushDim
Voir suspensions RUCHE Pages 190-191
Appliques architecturales en plâtre HD, éclairage direct et indirect.High strength plaster wall lamps with indirect and direct lighting.
3223 ANA Design Rémi Fontaine
RÉFÉRENCE CARACTÉRISTIQUES ORIENTATIONSOURCES
3223/ANA
200
200
122
lighting 2018
ANAdesign Rémi Fontaine
112
3223_02 Halogène
P. maxi: 60 W / 230 V G9
3223_03 Retrofit GX53 - P. maxi: 2 X 9 W
IP 20 850°C
IP 20 850°C
3057 DÉ Design Atelier Sedap
3057_02 Halogène
P. maxi: 60 W / 230 V G9
1,4 KG
3057_03 Retrofit GX53 - P. maxi: 2 X 9 W 1,4 KG
IP 20 850°C
IP 20 850°C
140
140 140
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
lighting 2018 113
DÉdesign Atelier Sedap
3057/DÉ
Gamme d’appliques architecturales en plâtre HD, éclairage direct et indirect, équipement LED HP.High strength plaster wall lamps, direct and indirect lighting, high powered LED equipment.
lighting 2018114
TROCADÉROdesign Fabrice Berrux
3140/TROCADÉRO 30
3141/TROCADÉRO 60
3141/TROCADÉRO 60
3140_06 LED COB - 2 x 9,2 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80
Diffuseur inférieur en PMMA satiné / Bottom satin PMMA diffusor
3140 TROCADÉRO 30 Design Fabrice Berrux
3141 TROCADÉRO 60 Design Fabrice Berrux
IP 20
LEDs et alimentation incluses / LEDs and power supply included
3141_06 LED COB - 2 x 18,4 W / 400mA / 3 000 °K / 5 720 lm / IRC > 80
Diffuseur inférieur en PMMA satiné / Bottom satin PMMA diffusor
IP 20
LEDs et alimentation incluses / LEDs and power supply included
92
100 380
100 660
92
TROCADÉRO
RÉFÉRENCE SOURCES CARACTÉRISTIQUES ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3140/TROCADÉRO 30
lighting 2018
3140_06.V1LED COB - 2 x 9,2 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable 1-10V
3140_06.V2LED COB - 2 x 9,2 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable DALI / PushDim / R2M
3141_06.V2LED COB - 2 x 18,4 W / 400mA / 3 000 °K / 5 720 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable DALI / PushDim / R2M
115
3142/MÉRIDIEN 30
Gamme d’appliques architecturales en plâtre HD, éclairage direct et indirect, équipement LED HP.High strength plaster wall lamps, direct and indirect light-ing, high powered LED equipment.
lighting 2018116
MÉRIDIENdesign Atelier Sedap
3142/MÉRIDIEN 30
3143/MÉRIDIEN 60
3143/MÉRIDIEN 60
MÉRIDIEN
3142 MÉRIDIEN 30 Design Atelier Sedap
3143 MÉRIDIEN 60 Design Atelier Sedap
3142_06 LED COB - 2 x 9,2 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80
Diffuseur inférieur en PMMA satiné / Bottom satin PMMA diffusor
IP 20
LEDs et alimentation incluses / LEDs and power supply included
3143_06 LED COB - 2 x 18,4 W / 400mA / 3 000 °K / 5 720 lm / IRC > 80
Diffuseur inférieur en PMMA satiné / Bottom satin PMMA diffusor
IP 20
LEDs et alimentation incluses / LEDs and power supply included
90390
115
115
90674
RÉFÉRENCE SOURCES CARACTÉRISTIQUES ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
lighting 2018
3142_06.V1LED COB - 2 x 9,2 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable 1-10V
3142_06.V2LED COB - 2 x 9,2 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable DALI / PushDim / R2M
3143_06.V2LED COB - 2 x 18,4 W / 400mA / 3 000 °K / 5 720 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable DALI / PushDim / R2M
117
1932/EDGE 32
Edge est une gamme d’appliques architecturales en plâtre HD. High strength plaster wall lamps.
lighting 2018118
EDGE design Atelier Sedap
1930/EDGE 20 1931/EDGE 28 1932/EDGE 32
1930_02
1931_03
Halogène
Fluo - Ballast électronique
P. maxi: 150 W / R7s / 78 mm
P. maxi: 18 W / G24q2
1930 EDGE 20 Design Atelier Sedap
1931 EDGE 28 Design Atelier Sedap
1932 EDGE 32 Design Atelier Sedap
0,9 KG
1 KGIP 20
.LDT
.LDT
IP 20 850°C
EDGE
315
160
65
95
125
58
57
275
205
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
lighting 2018
1930_06 LED COB - 7,8 W / 3 000 °K / 350mA / 970 lm 0,9 KGIP 20 850°C
Option dimmable : 1-10V / PushDim / DALI / Triac
1931_06 LED COB - 5,9 W / 3 000 °K / 500mA / 870 lm 1 KGIP 20 850°C
Option dimmable : 1-10V / PushDim
1932_06 LED COB - 23,4 W / 3 000 °K / 350mA / 2 910 lm / IRC > 80 3 KGIP 20 850°C
Option dimmable : DALI / PushDim
119
1933/EDGE 62
Edge est une gamme d’appliques architecturales en plâtre HD, éclairage indirect, fluorescence T5 électronique.High strength plaster wall lamps, indirect lighting, T5 electronic fluorescent.
lighting 2018120
EDGE design Atelier Sedap
1933/EDGE 62
EDGE design Atelier Sedap
1933/EDGE 62 1934/EDGE 92 1935/EDGE 122
1933_03
1934_03
1935_03
Fluo T5 - Ballast électronique - Verre de protection / Protective glass
Fluo T5 - Ballast électronique - Verre de protection / Protective glass
Fluo T5 - Ballast électronique - Verre de protection / Protective glass
P. maxi: 24 W / G5
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V)
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
1933 EDGE 62 Design Atelier Sedap
1934 EDGE 92 Design Atelier Sedap
1935 EDGE 122 Design Atelier Sedap
4 KG
4,9 KG
6,2 KG
IP 40 850°C
IP 40 850°C
IP 40 850°C
.LDT
.LDT
.LDT
EDGE
58
106
1220
106
58
920
106
58
620
P. maxi: 21-39 W / G5 multiwatt
P. maxi: 28-54 W / G5 multiwatt
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
lighting 2018
1933_06 LED COB 18,4 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80 IP 20
1933_06.V2LED COB 18,4 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable DALI / PushDim / R2M
4 KG
4 KG
1934_06 LED COB 27,6 W / 400mA / 3 000 °K / 4 290 lm / IRC > 80 IP 20
1934_06.V2LED COB 27,6 W / 400mA / 3 000 °K / 4 290 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable DALI / PushDim / R2M
4 KG
4 KG
1934_06 LED COB 36,8 W / 400mA / 3 000 °K / 5 720 lm / IRC > 80 IP 20
1934_06.V2LED COB 36,8 W / 400mA / 3 000 °K / 5 720 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable DALI / PushDim / R2M
4 KG
4 KG
121
3024/SUCRE 60
Sucre est une gamme d’appliques architec-turales en plâtre HD, éclairage direct et indi-rect, fluorescence T5 électronique.High strength plaster wall lamps, direct and indirect lighting, T5 electronic fluorescent.
lighting 2018122
SUCREdesign Atelier Sedap
SUCREdesign Atelier Sedap
3024/SUCRE 60 3023/SUCRE 90 3022/SUCRE 120
SUCRE détail
3024_03
3023_03
3022_03
Fluo T5 - Ballast électronique
Fluo T5 - Ballast électronique
Fluo T5 - Ballast électronique
P. maxi: 24 W / G5
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
3024 SUCRE 60 Design Atelier Sedap
3023 SUCRE 90 Design Atelier Sedap
3022 SUCRE 120 Design Atelier Sedap
4,9 KG
3 KG
3,8 KG
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V)
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
IP 20 850°C
IP 20 850°C
IP 20 850°C
SUCRE
.LDT
.LDT
.LDT55
95
1235
935
635
95
95
55
55
P. maxi: 21-39 W / G5 multiwatt
P. maxi: 28-54 W / G5 multiwatt
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
lighting 2018 123
126
3074/SUCRE LED 30
Gamme d’appliques architecturales en plâtre HD, éclairage direct et indirect, équipement LED HP.High strength plaster wall lamps, direct and indirect lighting, high powered LED equipment.
lighting 2018124
SUCRE LEDdesign Atelier Sedap
SUCRE LEDdesign Atelier Sedap
SUCRE LED détail
3074 SUCRE LED 30 Design Atelier Sedap
3075 SUCRE LED 60 Design Atelier Sedap
SUCRE LED
383
102
58
660
102
58
RÉFÉRENCE SOURCES CARACTÉRISTIQUES ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES ORIENTATION
lighting 2018
3074_06 LED COB - 2 x 9,2 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80
Diffuseur inférieur en PMMA satiné / Bottom satin PMMA diffusor
IP 20
LEDs et alimentation incluses / LEDs and power supply included
3074_06.V1LED COB - 2 x 9,2 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable 1-10V
3074_06.V2LED COB - 2 x 9,2 W / 400mA / 3 000 °K / 2 860 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable DALI / PushDim / R2M
3075_06 LED COB - 2 x 18,4 W / 400mA / 3 000 °K / 5 720 lm / IRC > 80
Diffuseur inférieur en PMMA satiné / Bottom satin PMMA diffusor
IP 20
LEDs et alimentation incluses / LEDs and power supply included
3075_06.V2LED COB - 2 x 18,4 W / 400mA / 3 000 °K / 5 720 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable DALI / PushDim / R2M
125
1732/BRIC 3055/SAQQARA
Appliques architecturales en plâtre HD.High strength plaster wall lamps.
1732/BRIC
lighting 2018126
BRIC & SAQQARAdesign Atelier Sedap
3055/SAQQARA
3055_03
1732_02
Fluocompact électronique multiwattage 26/32/42 W
Halogène
P. maxi: 42 W / GX24q4
P. maxi: 150 W - 78 mm / R7s
Fluocompact double - Alimentation électronique / Electronic power supply
3055 SAQQARA Design Atelier Sedap
1732 BRIC Design Atelier Sedap
1,7 KG
1,2 KG
1732_03
P. maxi: 18 W / G24q2
IP 20
1,2 KGIP 20
IP 20 850°C
BRIC & SAQQARA
135
80
250
240
120
70
Option: Ballast électronique gradable 1-10V / Dimmable electronic ballast 1-10V
Avec écran supérieur transparent et écran inférieur diffusant
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
With top transparent screen and bottom diffuser
lighting 2018
3055_06 LED COB - 23,4 W / 3 000 °K / 2 910 lm / IRC > 80 1,7 KGIP 20IP 20IP 20
3055_06.V2LED COB - 23,4 W / 3 000 °K / 2 910 lm / IRC > 80
Dimmable DALI / PushDim
1,7 KGIP 20IP 20IP 20
127
Appliques architecturales en plâtre HD, équipement LED.High strength plaster wall lamps with LED equipment.
3133_24 LED COB 17,8 W / 2 720 lm indirect / 350mA ou 26,6 W / 3 720 lm indirect / 500 mA
Switch sur l’équipement pour passer de 2 x 8,9 W à 2 x 13,3 W
3 KGIP 20
3133 FORMAT GM Design Fabrice Berrux
500
380
130
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3133_26
Driver multiwatt - LEDs et alimentation fournies / LEDs and power supply included
Switch sur l’équipement pour passer de 2 x 8,9 W à 2 x 13,3 W
Blanc chaud / Warm white (3 000 °K)
LED COB - 17,8 W / 2 720 lm indirect / 350mA ou 26,6 W / 3 720 lm indirect / 500 mA
Blanc chaud / Warm white (3 000 °K)
Driver multiwatt dimmable - LEDs et alimentation fournies / LEDs and power supply included
3 KGIP 20
lighting 2018128
FORMATdesign Fabrice Berrux
3133/FORMAT GM
Option dimmable : 1-10V / PushDim / DALI
FORMATdesign Fabrice Berrux
3079/FORMAT PM
FORMAT
3079_24 LED COB - 13,3 W / 500mA / 3 000 °K / 1 860 lm
Driver dimmable - LEDs et alimentation fournies / LEDs and power supply included
3079 FORMAT PM Design Fabrice Berrux
1,5 KGIP 20
160
360
270
380
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
Driver non dimmable - LEDs et alimentation fournies / LEDs and power supply included
3079_26 1,5 KGIP 20LED COB - 8,9 W / 350mA / 3 000 °K / 1 360 lm
lighting 2018 129
Option dimmable : 1-10V / PushDim / DALI
132
3077/AGRAFE
Appliques architecturales en plâtre HD, équipement fluocompact et LED.High strength plaster wall lamps with com-pact fluorescent and LED equipment.
lighting 2018130
AGRAFEdesign Atelier Sedap
3077_03
3078_03
Fluocompact - Ballast électronique
Fluocompact - Ballast électronique
P. maxi: 26W / G24q3
P. maxi: 2 x 26W / G24q3
3077 AGRAFE Design Atelier Sedap
3078 DOUBLE AGRAFFE Design Atelier Sedap
1,5 KG
2,4 KG
IP 20
IP 20
AGRAFE
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
54
142320
54
142
620
AGRAFE D’ANGLESAppliques architecturales en plâtre HD, équipement fluocompact.High strength plaster wall lamps with compact fluorescent equipment.
3220 AGRAFE 90 Design Atelier Sedap
Fluocompact - Ballast électronique3220_03
P. maxi: 26W / G24q3
IP 20
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
55443
lighting 2018
3220_06 LED COB - 9,2 W / 3 000 °K / 400mA / 1 430 lm / IRC > 80 IP 20IP 20IP 20
3220_06.V2LED COB - 9,2 W / 3 000 °K / 400mA / 1 430 lm / IRC > 80
Dimmable DALI / PushDim / R2M
IP 20IP 20IP 20
3077_06 LED COB - 9,2 W / 3 000 °K / 400mA / 1 430 lm / IRC > 80 1,5 KGIP 20IP 20IP 20
3077_06.V2LED COB - 9,2 W / 3 000 °K / 400mA / 1 430 lm / IRC > 80
Dimmable DALI / PushDim / R2M
1,5 KGIP 20IP 20IP 20
3078_06 LED COB - 18,4 W / 3 000 °K / 400mA / 2 860 lm / IRC > 80 2,4 KGIP 20IP 20IP 20
3078_06.V2LED COB - 18,4 W / 3 000 °K / 400mA / 2 860 lm / IRC > 80
Dimmable DALI / PushDim / R2M
2,4 KGIP 20IP 20IP 20
131
3020/AGRAFE 90
134
Applique architecturale en plâtre HD, éclairage indirect et direct.High strength plaster wall lamp, indirect and direct lighting.
1818
1818 DESIGN
ATELIER SEDAP
122 2015
Applique architecturale en plâtre HD, éclairage indirect et direct.High strength plaster wall lamp, indirect and direct lighting.
1818
1818 DESIGN
ATELIER SEDAP
122 2015
Applique architecturale en plâtre HD, éclairage indirect et direct.High strength plaster wall lamp, indirect and direct lighting.
lighting 2018132
1818design Atelier Sedap
Applique architecturale en plâtre HD, éclairage indirect et direct.High strength plaster wall lamp, indirect and direct lighting.Applique architecturale en plâtre HD, éclairage indirect et direct.High strength plaster wall lamp, indirect and direct lighting.
1818design Atelier Sedap
1818
1818 Design Atelier Sedap
1818_01 Retrofit E27 3,2 KG
1818_23 Fluocompact électronique multiwattage 26/32/42 W
P. maxi: 42 W / GX24q4
3,2 KGIP 20
IP 20
440
135
Option: Ballast électronique gradable / Dimmable electronic ballast 1-10V
Avec écran supérieur transparent / With top transparent screen
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
1818
1818 Design Atelier Sedap
1818_01 3,2 KG
1818_23 3,2 KGIP 20
IP 20
1818
440 207
135
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS
1818
1818 Design Atelier Sedap
1818_01 3,2 KG
1818_23 3,2 KGIP 20
IP 20
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS
lighting 2018
1818_06 LED COB - 23,4 W / 3 000 °K / 2 910 lm / IRC > 80 3,2 KGIP 20 3,2 KGIP 20 3,2 KGIP 20
1818_06.V2LED COB - 23,4 W / 3 000 °K / 2 910 lm / IRC > 80
Dimmable DALI / PushDim
3,2 KGIP 20 3,2 KGIP 20 3,2 KGIP 20
133
JAUNE FLUO / F1 ORANGE FLUO / F2
ROSE FLUO / F3 VERT FLUO / F4
ROUGE FLUO / F5 NOIR MAT / NM
lighting 2018134
FINITIONSPossibilités de choisir une finition colorée, métallisée, noire.
TITANE / MT OR / MJ
OR CUIVRÉ / MC
OR ROSÉ / MRCANON DE FUSIL / MF
FINITIONS
FINITIONS
lighting 2018 135
1564
Appliques architecturales en plâtre HD, éclairage indirect et direct.High strength plaster wall lamps, indirect and direct lighting.
lighting 2018136
1562, 1563 & 1564design Atelier Sedap
1564_03 Fluocompact double - Double dichroïque orientable
P. maxi: 2 x 18 W / G24q2 - P. maxi: 2 x 20 W - 12V / MR11 halogène
1564 Design Atelier Sedap
5,6 KG
Option: Allumage séparé / Separated power supply
IP 20 850°C
1562, 1563 & 1564
1000
220
130
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
lighting 2018
1564_06 LED COB - 18,4 W / 3 000 °K / 400mA / 2 680 lm / IRC >80 - 2 x MR11 LED 6 W / 12V 3,2 KGIP 20 3,2 KGIP 20 3,2 KGIP 20
1564_06.V2LED COB - 18,4 W / 3 000 °K / 400mA / 2 680 lm / IRC >80 - 2 x MR11 LED 6 W / 12V
Dimmable DALI / PushDim / R2M
3,2 KGIP 20 3,2 KGIP 20 3,2 KGIP 20
137
1563_03 Fluocompact - Dichroïque orientable côté gauche
1563 Design Atelier Sedap
2,8 KG
P. maxi: 18 W / G24q2 - P. maxi: 20 W - 12V / MR11 halogène
Option: Allumage séparé / Separated power supply
1562_03 Fluocompact - Dichroïque orientable côté droit
1562 Design Atelier Sedap
2,8 KG
P. maxi: 18 W / G24q2 - P. maxi: 20 W - 12V / MR11 halogène
Option: Allumage séparé / Separated power supply
IP 20 850°C
IP 20 850°C
165
410
140
165
410
140
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
1562_06 LED COB - 8 W / 3 000 °K / 350mA / 1 280 lm / IRC > 80 - MR11 LED 6 W /12V 2,8 KGIP 20IP 20IP 20
1563_06 LED COB - 8 W / 3 000 °K / 350mA / 1 280 lm / IRC > 80 - MR11 LED 6 W /12V 2,8 KGIP 20IP 20IP 20
1562
1563
Option dimmable : 1-10V / PushDim
Option dimmable : 1-10V / PushDim
1339
Appliques architecturales en plâtre HD, éclairage indirect.High strength plaster wall lamps, indirect lighting.
1317
lighting 2018138
1317,1339,1311 & 1333
design Atelier Sedap
1333
1339 Design Atelier Sedap
1317_01 Retrofit E27
1317 Design Atelier Sedap
1,5 KG
1339_01 Retrofit E27 1,5 KGIP 20
IP 20
1311, 1317, 1333 & 1339
300
150
145
295
140
107RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
1333_01 Retrofit E27
1333 Design Atelier Sedap
1,9 KGIP 20
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
135
610
250
1311 Design Atelier Sedap
1311_01 Retrofit E27 4,2 KGIP 20
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
1311
120
410
165
lighting 2018
1317_02 Halogène - P. maxi: 150 W / 78 mm / R7s 1,5 KGIP 20 850°C
1339_02 Halogène - P. maxi: 200 W / 117 mm / R7s 1,5 KGIP 20 850°C
1333_02 Halogène - P. maxi: 2 x 200 W / 117 mm / R7s
1333_06 LED COB - 8 W / 3 000 °K / 350mA / 1 280 lm / IRC > 80 1,9 KGIP 20
1333_06.V1LED COB - 8 W / 3 000 °K / 350mA / 1 280 lm / IRC > 80 1,9 KGIP 20
Dimmable 1-10V / PushDim
1,9 KGIP 20 850°C
1311_02 Halogène - P. maxi: 2 x 200 W / 117 mm / R7s
1311_06 LED COB - 18,4 W / 3 000 °K / 400mA / 2 460 lm / IRC > 80 4,2 KGIP 20
1311_06.V2LED COB - 18,4 W / 3 000 °K / 400mA / 2 460 lm / IRC > 80 4,2 KGIP 20
Dimmable DALI / PushDim / R2M
4,2 KGIP 20 850°C
139
Sur demande : TRIAC / DALI
1445
Appliques architecturales en plâtre HD, éclairage indirect.High strength plaster wall lamps, indirect lighting.
1523
lighting 2018140
1357, 1444,
1445 & 1523design Atelier Sedap
1444
1445_01 Retrofit E14 - P. maxi: 100 W
1445 Design Atelier Sedap
3,7 KG
1444_01 Retrofit E14 - P. maxi: 60 W
1444 Design Atelier Sedap
1,9 KGIP 20 850°C
IP 20
1357, 1444, 1445 & 1523
740
200
100
580
155
60
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
1357_01 Retrofit E27
1357 Design Atelier Sedap
10,3 KGIP 20
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
1523_01 Retrofit E27
1523 Design Atelier Sedap
10,4 KGIP 20
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
1145
280
125
1740
359
138
1357
lighting 2018
1523_02 Halogène - P. maxi: 2 x 200 W / 117 mm / R7s 10,4 KGIP 20
1523_06 LED COB - 36,8 W / 3 000 °K / 400mA / 5 720 lm / IRC > 80 10,4 KGIP 20
1523_06.V2LED COB - 36,8 W / 3 000 °K / 400mA / 5 720 lm / IRC > 80 10,4 KGIP 20
Dimmable DALI / PushDim / R2M
1557_02 Halogène - P. maxi: 2 x 200 W / 117 mm / R7s 10,3 KGIP 20
1557_06 LED COB - 18,4 W / 3 000 °K / 400mA / 2 860 lm / IRC > 80 10,3 KGIP 20
1557_06.V2LED COB - 18,4 W / 3 000 °K / 400mA / 2 860 lm / IRC > 80 10,3 KGIP 20
Dimmable DALI / PushDim / R2M
1445_02 Halogène - P. maxi: 2 x 200 W / 117 mm / R7s 3,7 KGIP 20
1445_06 LED COB - 18,4 W / 3 000 °K / 400mA / 2 680 lm / IRC > 80 3,7 KGIP 20
1445_06.V2LED COB - 18,4 W / 3 000 °K / 400mA / 2 680 lm / IRC > 80
3,7 KG
IP 20
Dimmable DALI / PushDim / R2M
1444_02 Halogène - P. maxi: 150 W / 78 mm / R7s 1,9 KGIP 20 850°C
141
1809/PLÂTRE & VERRE
Appliques architecturales en plâtre HD et verre, éclairage indirect et direct.High strength plaster and glass wall lamps, indirect and direct lighting.
lighting 2018142
PLATRE & VERREdesign Atelier Sedap
1817/PLÂTRE & VERRE
PLÂTRE & VERRE
220
115
110
420
220
lighting 2018 143
1809 PLÂTRE & VERRE Design Atelier Sedap
1809_01 Retrofit E27 1,9 KG
1817 PLÂTRE & VERRE Design Atelier Sedap
1817_01 Retrofit E27 1 KG
1809_23 Fluocompact électronique multiwattage 26/32/42 W 1,9 KGIP 20
IP 20
IP 20
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V)
Avec écran supérieur transparent / With top transparent screen
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
P. maxi: 42 W / GX24q4
Appliques architecturales en plâtre HD et verre, éclairage indirect et direct.High strength plaster and glass wall lamps, indirect and direct lighting.
lighting 2018144
1442, 1465 & 1738design Atelier Sedap
1738
1442
1465 Design Atelier Sedap
1465_01 Retrofit E27 2,7 KG
1738 Design Atelier Sedap
1738_01 Retrofit E27 1,6 KG
1442 Design Atelier Sedap
1442_01 Retrofit E27 2,8 KGIP 20 850°C
IP 20 850°C
IP 20 850°C
1442, 1465 & 1738
80
440
230
95
430
235
470
250
95RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
lighting 2018 145
Appliques architecturales en plâtre HD, éclairage indirect.High strength plaster wall lamps, indirect lighting.
3010/VANILLE PM
700
150
150
185
145
1100
1711 3011
lighting 2018146
VANILLEdesign Michel Tortel
1711/VANILLE
3010_01 Retrofit E27
3010 VANILLE PM Design Michel Tortel
2,9 KG
1711 VANILLE Design Michel Tortel
1711_01 Retrofit E27 5,2 KGIP 20
IP 20
VANILLE
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
lighting 2018 147
Applique architecturale en plâtre HD, éclairage direct/indirect.High strength plaster wall lamp, direct/indirect lighting.
1871/TOMTOM
1871_02 Retrofit GU10 - 230V - P. maxi: 2 x 50 W
1871 TOMTOM Design Alain Brux
2 KGIP 20 850°C
145
103
410RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
lighting 2018148
TOMTOMdesign Alain Brux
3104_02 Retrofit GU10 - 230V - P. maxi: 2 x 50 W
3104 CRISTALLOGRAPHIE Design Irina Petruk
2 KGIP 20 850°C
103
145
410
3104/CRISTALLOGRAPHIE
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
CRISTALLOGRAPHIE détail
lighting 2018 149
CRISTALLOGRAPHIEdesign Irina Petruk
Applique architecturale en plâtre HD, éclairage direct/indirect.High strength plaster wall lamp, direct/indirect lighting.
3084/SUCRE 90 IP 44
Appliques de salle de bain en plâtre HD, éclairage indirect et direct fluocompact.Bathroom high strength plaster wall lamps, indirect and direct com-pact fluorescent lighting.
lighting 2018150
SUCRE IP44 & OCÉAN
design Atelier Sedap
1707/OCÉAN
1707_03 Retrofit E27 IP23
Verre de protection haut et bas / Top and bottom protective glass included
1707 OCÉAN Design Atelier Sedap
2,3 KGIP 23 850°C
3084_03 Réglette fluo T5 IP44 - Ballast électronique
P. maxi: 21 W
3084 SUCRE 90 IP 44 Design Atelier Sedap
4 KG
3083_03 Réglette fluo T5 IP44 - Ballast électronique
P. maxi: 14 W
3083 SUCRE 60 IP 44 Design Atelier Sedap
2,5 KG
IP 44
IP 44
Montage vertical possible / Vertical mounting possible
Montage vertical possible / Vertical mounting possible
SUCRE IP44 & OCÉAN
950
55
82
650
82
55
530
120
90
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
lighting 2018 151
152
NUAGEdesign Julie Figueroa Zafiro
lighting 2018
Gamme d’appliques architecturales en plâtre HD, éclairage direct et indi-rect, équipement LED HP.High strength plaster wall lamps, direct and indirect lighting, high powered LED equipment.
3264_06 LED COB - 2 x 9,2 W / 400 mA / 3 000 °K / 2 860 lm / IRC > 80
Diffuseur inférieur en PMMA satiné / Bottom satin PMMA diffusor
3264 NUAGE Design Julie Figueroa Zafiro
IP 20
LEDs et alimentation incluses / LEDs and power supply included
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3264_06.V1LED COB - 2 x 9,2 W / 400 mA / 3 000 °K / 2 860 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable 1-10V
3264_06.V2LED COB - 2 x 9,2 W / 400 mA / 3 000 °K / 2 860 lm / IRC > 80 IP 20
Alimentation éléctronique dimmable PushDim / R2M
3264.AA.012 x E27 Retrofit IP 20
500 140
270
NUAGE
lighting 2018 153
3240/TORTUE
lighting 2018154
TORTUEdesign Didier Cornille
Appliques architecturales en plâtre HD, éclairage indirect.High strength plaster wall lamps, indirect lighting.
CHATS, LAPIN, NOUNOURS & TORTUE
1810_01 Retrofit E14 forme tube - P. maxi: 2 x 40 W
1810 CHATS Design Atelier Sedap
2,7 KG
1813 LAPIN Design Didier Cornille
1814 NOUNOURS Design Didier Cornille
IP 20 850°C
CHATS, LAPIN, NOUNOURS & TORTUE
140
325
200
410
140
200
325
180
100
3240 TORTUE Design Didier Cornille
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
1813/LAPIN1810/CHATS 1814/NOUNOURS
lighting 2018
1813_01 Retrofit E14 - P. maxi: 60 W 2,9 KGIP 20
1813_06 LED COB - 6 W / 2 700 °K / 580 lm / IRC > 80 2,9 KGIP 20
1814_01 Retrofit E14 - P. maxi: 60 W 2,3 KGIP 20
1814_06 LED COB - 6 W / 2 700 °K / 580 lm / IRC > 80 2,3 KGIP 20
3240_01 Retrofit E14 - P. maxi: 60 W 2,3 KGIP 20
3240_06 LED COB - 6 W / 2 700 °K / 580 lm / IRC > 80 2,3 KGIP 20
1810_06 LED COB - 12 W / 2 700 °K / 1 160 lm / IRC > 80 2,7 KGIP 20 850°C
155
325
200
140
158
3131/BISCUIT ROND
lighting 2018156
BISCUITdesign Didier Cornille
BISCUIT & ÉTOILESAppliques architecturales en plâtre HD, éclairage indirect.High strength plaster wall lamps, indirect lighting.
3132/BISCUIT RECTANGLE 1549/ÉTOILES
BISCUIT & ÉTOILES
3131_01 Retrofit E14 - P. maxi: 60 W
3131 BISCUIT ROND Design Didier Cornille
2,3 KG
3132 BISCUIT RECTANGLE Design Didier Cornille
IP 20
1549 ÉTOILES Design Atelier Sedap
1549_01 Retrofit E27 1,6 KGIP 20 135
160
325
3132_01 Retrofit E14 - P. maxi: 60 W 2,3 KGIP 20
280
70
200
240 70
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
lighting 2018
3131_06 LED COB - 6 W / 2 700 °K / 580 lm / IRC > 80 2,3 KGIP 20
3132_06 LED COB - 6 W / 2 700 °K / 580 lm / IRC > 80 2,3 KGIP 20
157
1380/CHARME
Appliques architecturales en plâtre HD, éclairage indirect.High strength plaster wall lamps, indirect lighting.
CHARME, CHÊNE & FEUILLE
lighting 2018158
CHARMEdesign Atelier Sedap
1543/CHÊNE
1543_01 Retrofit E14 forme tube - P. maxi: 60 W
1543 CHÊNE Design Atelier Sedap
2,2 KG
1836_01 Retrofit E14 forme tube - P. maxi: 60 W
1836 FEUILLE Design Atelier Sedap
2,2 KG
1380_01 Retrofit E14 forme tube - P. maxi: 60 W
1380 CHARME Design Atelier Sedap
1,9 KGIP 20
IP 20
IP 20
CHARME, CHÊNE & FEUILLE
430
220
140
250
600
150
555
295
90
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
1836/FEUILLE
lighting 2018 159
1486 1487
Appliques d’angle en plâtre HD.High strength plaster corner wall lamps.
1427,1486, 1487, PLÂTRE ET VERRE & LIA PLÂTRE ET VERRE
lighting 2018160
14861487
design Yves Blayo
3032/ LIA PLÂTRE & VERRE
1817_01 Retrofit E27
1817 PLÂTRE & VERRE Design Atelier Sedap
1,1 KG
3032 LIA PLÂTRE & VERRE Design Atelier Sedap
3032_01 Retrofit E27 2,3 KG
1427 Design Atelier Sedap
1427_01 Retrofit E27 forme tube 1,4 KG
1486_01 Retrofit E27
1486 Design Yves Blayo
2,8 KG
1487 Design Yves Blayo
1487_01 Retrofit E27 2,9 KG
IP 20
IP 20
IP 20
IP 20
IP 20
APPLIQUES D’ANGLE
230 180
835
230 180
835
200
165
206
115
Option kit d’angle / Corner wall lamp as an option
Option kit d’angle / Corner wall lamp as an option
156
220
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
1817/PLÂTRE & VERRE 1427
lighting 2018
Verre diffusant en partie basse
161
1740/DOUBLE ÉCLAIRAGE 1739/COMPACT VERRE & PLÂTRE
1741/COMPACT 3015/LIGHT
Appliques architecturales en plâtre HD.High strength plaster wall lamps.
COMPACT
lighting 2018162
1740_01 Retrofit E27
1740 COMPACT DOUBLE ÉCLAIRAGE Design Atelier Sedap
1,5 KGIP 20
1739_01 Retrofit E27
1739 COMPACT VERRE & PLÂTRE Design Atelier Sedap
1,5 KGIP 20
1741_01 Retrofit E27
1741 COMPACT Design Atelier Sedap
1,3 KGIP 20
Verre dépoli / Frosted glass
3015, 1739, 1740 & 1741
80
280
130
275
150
150
280
150
100
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3015_02 Halogène
3015 LIGHT Design Atelier Sedap
0,7 KGIP 20 850°C
P. maxi: 150 W - 78 mm / R7s .LDT 170
45
140
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
lighting 2018 163
1744/ BANDEAU COMPACT
Appliques architecturales en plâtre HD.High strength plaster wall lamps.
lighting 2018164
COMPACTdesign Atelier Sedap
1743/PLAFONNIER COMPACT
1745/ TRANSPARENCE VERRE & PLÂTRE 1730/ MINI COMPACT
1745_01 Retrofit E27
1745 TRANSPARENCE VERRE & PLÂTRE Design Atelier Sedap
1,7 KG
1743_01 Retrofit E27
1743 PLAFONNIER COMPACT PLÂTRE & VERRE Design Atelier Sedap
2,7 KG
IP 20
IP 20 850°C
1730_02 Halogène
P. maxi: 150 W - 78 mm / R7s
1730 MINI-COMPACT Design Atelier Sedap
0,7 KG
1744_01 Retrofit E27
1744 BANDEAU COMPACT Design Atelier Sedap
2,1 KGIP 20
IP 20 850°C
Verre dépoli / Frosted glass
Verre dépoli / Frosted glass
1730, 1743, 1744 & 1745
.LDT
330
86
180
100
400
140
140
Ø 315
118
78
126
270
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
lighting 2018
1743_06 LED COB - 14,5 W / 230-240V / 3 000 °K / 2 330 lm / IRC >80 2,7 KGIP 20 850°C
165
lighting 2018166
168 - 177
APPLIQUES TABLEAUXLIGHTING SCULPTURES TABELLENCUADROS PANELLI
lighting 2018 167
168-169
170-171
172-1731594/ÉCLIPSE 1595/BOLIDE
3026/GEMME3126/VENUS 35 3127/VENUS 55
1710 1834 1835/MOUCHARABIEH
3134/VOILE PM
174-175
176-177
3222/CRÉPIDULA3136/ATOLL 3137/ATOLL
170
ATOLL & CRÉPIDULAAppliques en plâtre HD, éclairage indirect et direct fluocompact.High strength plaster wall lamps indirect and direct compact fluo-rescent lighting.
lighting 2018168
ATOLLdesign Leonovitch Arseni
ATOLL & CRÉPIDULA
3136/ATOLL & 3222 CREPIDULA
480
550
480
410
460
550 140
3222/CRÉPIDULA
lighting 2018 169
3137 ATOLL Design Leonovitch Arsenii
Fluocompact 2D ou Retrofit LED (ampoule non fournie)3137_03
P. maxi: 28 W / GR10q
IP 20 850°C
3136 ATOLL Design Leonovitch Arsenii
Fluocompact 2D ou Retrofit LED (ampoule non fournie)3136_03
P. maxi: 28 W / GR10q
IP 20 850°C
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3222 CRÉPIDULA Design Atelier Sedap
Fluocompact 2D ou Retrofit LED (ampoule non fournie)3222_03
P. maxi: 28 W / GR10q
IP 20 850°C
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
Gamme d’appliques architecturales en plâtre HD.High strength plaster wall lamps.
3126/VENUS 35 & 3127/VENUS 55
80
Ø 350
Ø 554
80
lighting 2018170
VENUSdesign Fabrice Berrux
3126_03 Fluocompact 2D ou Retrofit LED (ampoule non fournie)
P. maxi: 28 W / GR 10q
3126 VENUS 35 Design Fabrice Berrux
3,4 KGIP 20 850°C
3127_03 Fluocompact 2D ou Retrofit LED (ampoule non fournie)
P. maxi: 28 W / GR 10q
3127 VENUS 55 Design Fabrice Berrux
7 KGIP 20 850°C
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3026/GEMME
lighting 2018 171
GEMMEdesign Didier Cornille
130
620
620
Applique architecturale en plâtre HD.High strength plaster wall lamp.
3026_03 Fluocompact 2D ou Retrofit LED (ampoule non fournie)
3026 GEMME Design Didier Cornille
6,7 KGIP 20 850°C
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
P. maxi: 28 W / GR 10q
Appliques architecturales en plâtre HD.High strength plaster wall lamps.
1594/ÉCLIPSE
lighting 2018172
ÉCLIPSE & BOLIDEdesign Neil Poulton
1595/BOLIDE 1595/BOLIDE
ÉCLIPSE & BOLIDE
90
750
750
lighting 2018 173
750
90
750
1595_03 Tube circulaire et ballast électronique
P. maxi: 55 W / 2GX13
1595 BOLIDE Design Neil Poulton
12,7 KGIP 20
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
1594_03 Tube circulaire et ballast électronique
P. maxi: 55 W / 2GX13
1594 ÉCLIPSE Design Neil Poulton
12,7 KGIP 20
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
LED COB - 24 W / 600mA / 3 000 °K / 4 000 lm / IRC > 80 12,7 KGIP 20 850°C 1594_06
LED COB - 24 W / 600mA / 3 000 °K / 4 000 lm / IRC > 80 12,7 KGIP 20 850°C 1595_06
Option dimmable : 1-10V / PushDim / DALI
Option dimmable : 1-10V / PushDim / DALI
3134/VOILE PM
lighting 2018174
VOILEdesign Didier Cornille
Appliques architecturales en plâtre HD.High strength plaster wall lamps.
VOILE
400
400
115
VOILE
lighting 2018 175
3134_03 Fluocompact 2D ou Retrofit LED (ampoule non fournie)
3134 VOILE PM Design Didier Cornille
4,5 KGIP 20
Voir plafonniers VOILE Pages 214-215
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
P. maxi: 28 W / GR 10q
1835/MOUCHARABIEH MM
Appliques architecturales en plâtre HD.High strength plaster wall lamps.
lighting 2018176
MOUCHARABIEHdesign Ddier Cornille
1710/MOUCHARABIEH GM 1834/MOUCHARABIEH PM
MOUCHARABIEH
275
275
80
350
80
350
85
500
500
lighting 2018 177
1710_03
1710 MOUCHARABIEH GM Design Didier Cornille
7 KG
1835_03
1835 MOUCHARABIEH MM Design Didier Cornille
3,4 KG
1834_03
1834 MOUCHARABIEH PM Design Didier Cornille
2,5 KG
IP 20 850°C
IP 20 850°C
IP 20 850°C
Voir plafonniers MOUCHARABIEH Pages 202-203
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
Fluocompact 2D ou Retrofit LED (ampoule non fournie)
P. maxi: 28 W / GR 10q
Fluocompact 2D ou Retrofit LED (ampoule non fournie)
P. maxi: 28 W / GR 10q
Fluocompact 2D ou Retrofit LED (ampoule non fournie)
P. maxi: 28 W / GR 10q
lighting 2018178
180 - 207 SUSPENSIONSPENDANTS HÄNGELEUCHTEN SUSPENSIONES SOSPENSIONI
190-191
3180/ANNEAU 80 3181/ANNEAU 100
194-195
198-199
200-201
202-203
204-205
192-193
3128/TERRE 25
1824/HALO
3090/AUDIO 1 3091/AUDIO 2 3092/AUDIO 3
1571/ELLIPSE 1833/ÉVOLUTION
1886/QUARTZ
1572
1575 15761385 1573 1574
3095/MINI QUARTZ3094/MINI AUDIO3190/MINI TUBE
196-1973158/TROCADÉRO 30 3159/TROCADÉRO 60
206-207
lighting 2018 179
3274/RIVOLI
3260-3261-3262/RUCHE
188-1893267-3268-3269/PLISSÉ
184-1873270/PERLES 3271/PERLES 3287/PERLES
180-181ABC/MOTS
182-1833273/ASTRE
lighting 2018180
#hashtag #lettres #desmotsenlair #love #lumiere #lesparolessenvolentlesecritsrestent #letters #write #lightupPlume de lumière, alphabet, idées lumineuses, concept de lumière. Ecrivez - Eclairez... un concept de lumières. Write and light ! Powered by iGuzzini. Words fly past, writings remain!
MOTSdesign Fabrice Berrux
ABC.# MOTS LED COB - 4 W / 700mA / 3 000 °K / 320 lm / 26 x 6 x 45 cm260
450
47
lighting 2018 181
ABC.#ABC.AABC.RABC.TABC.E
MOTS
POWERED BY IGUZZINI
lighting 2018182
ASTREdesign Fabrice Berrux
#ciel #planete suspendue #bimatiere #sideral #spatial #eclipse #flyingsaucer #suspendedplanet #zenith #heavenly #infinity Un crépuscule de lune fantasmé par une suspension bi-matière. A lunar landscape hovering in space obscuring the light.
3273 ASTRE Design Fabrice Berrux
3273_26 LED COB - 42 W / 3 000 ° K / 24V / 4 000 lm / IP20
Warm white LEDs and power supply included
IP 20
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
820
160
lighting 2018 183
ASTRE
186 lighting 2018184
PERLESdesign Fabrice Berrux
PERLESdesign Fabrice Berrux
185lighting 2018
#bijouxlumineux #perles #feminin #bracelets #bijou #brillant #placevendome #joaillerie Tout ce qui brille... Éclat du Bijou! Pendantifs, boucles d’oreille et bracelets... La nouvelle collection d’éclairage au féminin by Fabrice Berrux.
3288 PERLES suspension 100 Design Fabrice Berrux
3288_26 LED COB - 60 W / 3 000 °K / 24V / 6 200 lm / IP20
Warm white LEDs and power supply included
IP 20
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3287 PERLES suspension 80 Design Fabrice Berrux
3287_26 LED COB - 48 W / 3 000 °K / 24V / 5 000 lm / IP20
Warm white LEDs and power supply included
IP 20
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
70
ø800
85.6
2
5.89
ø1000
70
3288/PERLES 100
lighting 2018186
3271 PERLES suspension verticale Design Fabrice Berrux
3271_06 LED COB - 16 W / 350 mA / 3 000 °K / 2 560 lm / IRC >80
Diffuseur inférieur en PMMA satiné / Bottom satin PMMA diffusor
IP 20
LEDs et alimentation incluses / LEDs and power supply included
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3271_06.V2LED COB - 16 W / 350 mA / 3 000 °K / 2 560 lm / IRC >80 IP 20
Alimentation éléctronique dimmable DALI / PushDim / R2M
3270 PERLES suspension horizontale Design Fabrice Berrux
3270_06 LED COB - 16 W / 350 mA / 3 000 °K / 2 560 lm / IRC >80
Diffuseur inférieur en PMMA satiné / Bottom satin PMMA diffusor
IP 20
LEDs et alimentation incluses / LEDs and power supply included
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3270_06.V2LED COB - 16 W / 350 mA / 3 000 °K / 2 560 lm / IRC >80 IP 20
Alimentation éléctronique dimmable DALI / PushDim / R2M
70
290
636 Ø70630
70
630
3271/PERLES
lighting 2018 187
PERLES
3270/PERLES
lighting 2018
PLISSÉdesign Fabrice Berrux
Gamme de suspensions en plâtre HD. High strength plaster pendants lamps, for direct lighting.
188
lighting 2018
3267 PLISSÉ GM Design Fabrice Berrux
3267_26 13 KGLED COB - 52 W / 3 100 ° K / 24V / 5 400 lm
Warm white LEDs and power supply included
IP 20
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3268 PLISSÉ MM Design Fabrice Berrux
3268_26 13 KGLED COB - 52 W / 3 100 ° K / 24V / 5 400 lm
Warm white LEDs and power supply included
IP 20
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3269 PLISSÉ PM Design Fabrice Berrux
3269_26 13 KGLED COB - 52 W / 3 100 ° K / 24V / 5 400 lm
Warm white LEDs and power supply included
IP 20
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
189
#matiere #tissu #hautecouture #fashionweek #dixheuresdix #fabric #pleatedSuspensions Haute Couture, la collection PLISSÉ invite la Fashion Week dans vos intérieurs. Fashion Statements, the PLISSÉ collection dictates the passion of your interiors.
22.5
8
52.3
838
.89
32.5
9
52.2
9
18.9
0
22.6
3
40.9
119
.16
390
ø520
ø220
22.5
8
52.3
838
.89
32.5
9
52.2
9
18.9
0
22.6
3
40.9
119
.16190
ø520
ø320
22.5
8
52.3
838
.89
32.5
9
52.2
9
18.9
0
22.6
3
40.9
119
.16190
ø400
ø220
PLISSÉ
lighting 2018190
RUCHEdesign Bruno Houssin
Gamme de suspensions en plâtre HD. High strength plaster pendants lamps, for direct lighting.
Gamme de suspensions en plâtre HD. High strength plaster pendants lamps, for direct lighting.
lighting 2018 191
3260 PETITE RUCHE Design Bruno Houssin
3256_06 LED COB - 7,8 W / 3 000 °K / 970 lm / 350 mARÉFÉRENCE SOURCES
Alimentation non incluse / Power supply not included
3261_24 LED COB - 13,3 W / 24V / 500mA / 3 000 °K / 1 860 lm
Driver dimmable - LEDs et alimentation fournies / LEDs and power supply included
3261 MOYENNE RUCHE Design Bruno Houssin
IP 20
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
Driver non dimmable - LEDs et alimentation fournies / LEDs and power supply included
3261_26 IP 20LED COB - 8,9 W / 24V / 350mA / 3 000 °K / 1 360 lm
Option dimmable : 1-10V / PushDim / DALI
3262 GRANDE RUCHE Design Bruno Houssin
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION3262_06 LED COB - 26,7 W / 900mA / 3 000 °K / 3 720 lm IP 20 850°C
Option dimmable : 1-10V / DALI / PushDim
CARACTÉRISTIQUES POIDS ORIENTATION
Ø168
Ø135
122122
ø168ø135
Ø277
Ø222
200200
ø277ø222
360
Ø493
Ø395
358
ø493ø395
RUCHE
lighting 2018
Suspension en plâtre HD. High strength plaster pendant lamp, for direct lighting.
COUPOLE RIVOLI
192
RIVOLIdesign Atelier Sedap
lighting 2018 193
#paris #villelumiere #fastes #ornement #artdevivre #style #feuilleda-canthe #haussmann #coupole #artisans #classic #craftmanshipTout le style classique du siècle des Lumières concentré dans une collection de coupoles en applique, plafonnier, suspension ou encastré. All the classic style from the Age of Enlightenment concentrated in a collection of wall-ceiling-pendant domes.
3274 COUPOLE RIVOLI Design Atelier Sedap
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3274_26 12 KGCoupole - Flex LEDs HP 340 cm / 3 100 ° K / 24V / 66 W / 6 800 lm
Warm white LEDs and power supply included
IP 20
3274_00 12 KGCoupole sans équipement électrique / Dome without LED
3274_27 Coupole - Flex LEDs 340 cm RVB/RGB / 24V / 51 W / Télécommande radio (RF)
LEDs and power supply included
IP 20 12 KG
3274_29 Coupole - Flex LEDs HP 340 cm / 2 800 ° K / 24V / 66 W / 6 800 lm
LEDs and power supply included
IP 20 12 KG
3274_31 Coupole - Flex LEDs THP 340 cm / 3 000 ° K / 24V / 88,4 W / 8 400 lm
LEDs and power supply included
IP 20 12 KG
3274_32 Coupole - Flex LEDs THP 340 cm / 2 700 ° K / 24V / 88,4 W / 8 400 lm
LEDs and power supply included
IP 20 12 KG
C
M
J
CM
MJ
CJ
CMJ
N
Plaf. Coupoles.pdf 1 03/01/13 16:57
1000
1170
120
Gamme de suspensions en plâtre HD. High strength plaster pendants lamps, for direct lighting.
3181/ANNEAUX 100
lighting 2018194
ANNEAUXdesign Atelier Sedap
3180/ANNEAU 803180/ANNEAU 80
ANNEAUX
920
660
80
1120
860
80
maxi: 2000
lighting 2018
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
3180 ANNEAU 80 Design Atelier Sedap
3180_26 13 KGSuspension - Flex LEDs HP / 3 100 ° K / 24V / 52 W / 5 400 lm
Warm white LEDs and power supply included
IP 20
3180_27 Suspension - Flex LEDs RVB/RGB / 24V / 41 W / Télécommande radio (RF)
LEDs and power supply included
IP 20 13 KG
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3180_29 Suspension - Flex LEDs HP / 2 800 ° K / 24V / 52 W / 5 400 lm
LEDs and power supply included
IP 20 13 KG
3180_31 Suspension - Flex LEDs THP / 3 000 ° K / 24V / 70 W / 6 670 lm / IRC > 90
LEDs and power supply included
IP 20 13 KG
3180_32 Suspension - Flex LEDs THP / 2 700 ° K / 24V / 70 W / 6 670 lm / IRC > 90
LEDs and power supply included
IP 20 13 KG
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
3181 ANNEAU 100 Design Atelier Sedap
3181_26 17 KGSuspension - Flex LEDs HP / 3 100 ° K / 24V / 66 W / 6 800 lm
Warm white LEDs and power supply included
IP 20
3181_27 Suspension - Flex LEDs RVB/RGB / 24V / 51 W / Télécommande radio (RF)
LEDs and power supply included
IP 20 17 KG
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3181_29 Suspension - Flex LEDs HP / 2 800 ° K / 24V / 66 W / 6 800 lm
LEDs and power supply included
IP 20 17 KG
3181_31 Suspension - Flex LEDs THP / 3 000 ° K / 24V / 88,4 W / 8 400 lm / IRC > 90
LEDs and power supply included
IP 20 17 KG
3181_32 Suspension - Flex LEDs THP / 2 700 ° K / 24V / 88,4 W / 8 400 lm
LEDs and power supply included
IP 20 17 KG
195
3159/TROCADÉRO 90
lighting 2018196
TROCADÉROdesign Fabrice Berrux
TROCADÉRO3158/TROCADÉRO 60
3158_03 Fluo T5 - Ballast électronique - Diffuseur inférieur PMMA satiné
P. maxi: 24 W / G5
3158 TROCADÉRO 60 Design Fabrice Berrux
TROCADÉRO
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
3159 TROCADÉRO 90 Design Fabrice Berrux
IP 20
1260 185
115
742 185
115
maxi: 2000
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
lighting 2018
3158_06 LED COB - 18,4 W / 400mA / 3 000 °K / 2 860 lm
Option dimmable : DALI / PushDim / R2M
IP 20
3159_03 Fluo T5 - Ballast électronique - Diffuseur inférieur PMMA satiné
P. maxi: 28-54 W / G5 multiwatt
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
IP 20
3159_06 LED COB - 36,8 W / 400mA / 3 000 °K / 5 720 lm
Option dimmable : DALI / PushDim / R2M
IP 20
197
Suspension en plâtre HD. High strength plaster pendant lamp, for direct lighting.
Diffuseur inférieur en PMMA satiné / Bottom satin PMMA diffusor
Diffuseur inférieur en PMMA satiné / Bottom satin PMMA diffusor
1824/HALO
Suspensions en métal et plâtre naturel.High strength plaster pendants.
QUARTZ & HALO
lighting 2018198
HALOdesign Michel Tortel
1886/QUARTZ
1824_06 LED COB - 32,5 W / 500mA / 3 000 °K / 4 350 lm
1824 HALO Design Michel Tortel
10,2 KGIP 20 850°C
QUARTZ & HALO
213
675
550
50
50
600-2000RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
maxi: 2000
maxi: 2000
lighting 2018
1824_06.V1LED COB - 32,5 W / 500mA / 3 000 °K / 4 350 lm
Dimmable 1-10V / DALI / PushDim
10,2 KGIP 20 850°C
199
1886_02 Retrofit PAR30 E27 - P. maxi: 100 W
1886 QUARTZ Design Michel Tortel
6,8 KGIP 20
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3090/AUDIO 1 3091/AUDIO 2 3092/AUDIO 3
Gamme de suspensions en plâtre HD. High strength plaster pendants.
3090/AUDIO 1
lighting 2018200
AUDIOdesign Fabrice Berrux
AUDIOdesign Fabrice Berrux
AUDIO
maxi: 2000
400
480
320
460
360
900
3092/AUDIO 3
lighting 2018 201
3090_02 Retrofit PAR30 E27 - P. maxi: 100 W
3090 AUDIO 1 Design Fabrice Berrux
10 KG
3091_02 Retrofit PAR30 E27 - P. maxi: 100 W
3091 AUDIO 2 Design Fabrice Berrux
7 KG
3092_02 Retrofit PAR30 E27 - P. maxi: 100 W
3092 AUDIO 3 Design Fabrice Berrux
8 KG
IP 20
IP 20
IP 20
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
Suspensions en plâtre HD, source fluorescente T5 pour éclairage indirect. High strength plaster pendants, with T5 fluorescent equipment, for indirect lighting.
1572, ELLIPSE & ÉVOLUTION
1571/ELLIPSE
1572
lighting 2018202
ÉVOLUTIONdesign Atelier Sedap
1833/ÉVOLUTION
1571_03 3 tubes fluorescents T5
1571 ELLIPSE Design Atelier Sedap
22 KG
1833_03 3 tubes fluorescents T5 et spots orientables
1833 ÉVOLUTION Design Atelier Sedap
24,2 KG
P. maxi: 5 x 20 W - 12 V diam 35 mm / GZ4 MR11 orientables / ajustable
Option: Allumage séparé / Separated power supply
IP 20 850°C
IP 20 850°C
1572, ELLIPSE & ÉVOLUTION
1760
780
150100-2000
1760
780
100-2000150
P. maxi: 3 x 28-54 W / G5 multiwatt
P. maxi: 3 x 54 W / G5
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
2000
600
145
100-2000
lighting 2018
1571_06 LED COB - 73,6 W / 400mA / 3 000 °K / 11 440 lm / IRC > 80 27,1 KGIP 20 850°C
LED COB - 73,6 W / 400mA / 3 000 °K / 11 440 lm / IRC > 80
Dimmable DALI / PushDim / R2M
1571_06.V2 27,1 KGIP 20 850°C
1833_06 LED COB - 73,6 W / 400mA / 3 000 °K / 11 440 lm / IRC > 80 27,1 KGIP 20 850°C
LED COB - 73,6 W / 400mA / 3 000 °K / 11 440 lm / IRC > 80
Dimmable DALI / PushDim / R2M
1833_06.V2 27,1 KGIP 20 850°C
et 5 x 20 W - 12 V diam 35 mm / GZ4 MR11 orientables / ajustable
et 5 x 20 W - 12 V diam 35 mm / GZ4 MR11 orientables / ajustable
203
1572_03 Fluo T5 - Ballast électronique
1572 Design Yves Blayo
27,1 KGIP 20 850°C
P. maxi: 3 x 39 W / G5
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
1572_06 LED COB - 55,2 W / 400mA / 3 000 °K / 8 580 lm / IRC > 80 27,1 KGIP 20 850°C
LED COB - 55,2 W / 400mA / 3 000 °K / 8 580 lm / IRC > 80
Dimmable DALI / PushDim / R2M
1572_06.V2 27,1 KGIP 20 850°C
3276
3236 3237 3276 3283 3284
Gamme de suspensions en plâtre HD et métal. High strength plaster pendants, for indirect lighting.
3236, 3237, 3276, 3283 & 3284
lighting 2018204
3236design Atelier Sedap
3236, 3273, 3276, 3283 & 3284
lighting 2018 205
3237_06 LED COB - 26,7 W / 900mA / 3 000 °K / 3 720 lm / IRC > 80
LED COB - 26,7 W / 900mA / 3 000 °K / 3 720 lm / IRC > 80
3237 Design Atelier Sedap
9 KG
Dimmable DALI / 1-10V / PushDim
3237_06dim 9 KG
3236_06 LED COB - 22 W / 230-240V / 3 000 °K / 2 320 lm / IRC > 80
3236 Design Atelier Sedap
2,9 KG
IP 20
IP 20 850°C
IP 20 850°C
80
Ø500
80
Ø600
106
Ø800
133
Ø1000
Ø1200
160
RÉFÉRENCE SOURCES
CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3276_06 LED COB - 26,7 W / 900mA / 3 000 °K / 3 720 lm / IRC > 80
LED COB - 26,7 W / 900mA / 3 000 °K / 3 720 lm / IRC > 80
3276 Design Atelier Sedap
10 KG
Dimmable DALI / 1-10V / PushDim
3276_06dim 10 KGIP 20
IP 20 850°C
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3283_06 LED COB - 26,7 W / 900mA / 3 000 °K / 3 720 lm / IRC > 80
LED COB - 26,7 W / 900mA / 3 000 °K / 3 720 lm / IRC > 80
3283 Design Atelier Sedap
12,8 KG
Dimmable DALI / 1-10V / PushDim
3283_06dim 12,8 KGIP 20
IP 20 850°C
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3284_06 LED COB - 26,7 W / 900mA / 3 000 °K / 3 720 lm / IRC > 80
LED COB - 26,7 W / 900mA / 3 000 °K / 3 720 lm / IRC > 80
3284 Design Atelier Sedap
15 KG
Dimmable DALI / 1-10V / PushDim
3284_06dim 15 KGIP 20
IP 20 850°C
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
20 - 200
20 - 200
20 - 200
20 - 200
20 - 200
3095/MINI QUARTZ3094/MINI AUDIO
Mini suspensions en plâtre HD, éclairage direct. High strength plaster pendants, for direct lighting.
TERRE 25, MINI TUBE, MINI QUARTZ & MINI AUDIO
lighting 2018206
MINI SUSPENSIONSdesign Atelier Sedap & Fabrice Berrux
3190/MINI TUBE
3095_02 MR16 dichroïque halogène ou LED
3095 MINI QUARTZ Design Michel Tortel
2 KG
3094_02 MR16 dichroïque halogène ou LED
3094 MINI AUDIO Design Fabrice Berrux
2 KG
3190_02 MR16 dichroïque halogène ou LED
P. maxi: 50 W / GU10 - 230V
3190 MINI TUBE Design Atelier Sedap
2 KG
P. maxi: 50 W / GU10 - 230V
P. maxi: 50 W / GU10 - 230V
IP 20 850°C
IP 20 850°C
TERRE 25, MINI TUBE, MINI AUDIO & MINI QUARTZ
IP 20 850°C
380
120
180
220
120
120
350
maxi: 2000
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3128_02 MR16 dichroïque halogène ou LED
P. maxi: 50 W / GU10 - 230V
3128 TERRE 25 Design Fabrice Berrux
2 KGIP 20 850°C
184
260RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
maxi: 2000
TERRE 25
lighting 2018 207
210 lighting 2018208
210 - 225 PLAFONNIERSCEILING LAMPS DECKENLEUCHTEN PLAFONES PLAFONIERE
211
212-213
210-211
214-215
218-219
3164/COUPOLE 1003160/COUPOLE 42 3162/COUPOLE 75
3170/ANNEAU 80 3171/ANNEAU 100
3096/TUBE 120 3097/TUBE 200 3098/TUBE 300
1579/VOILE 3135/VOILE PM
1885 3011 3012
1743 1982 1983
216-217
220-221
222-223
224-225
3165/COUPOLE S 1003161/COUPOLE S 42 3163/COUPOLE S 75
3172/PLAF ROND 3173/PLAF CARRÉ
lighting 2018 209
ANNEAUX 80 & 100
3171/ANNEAU 1003170/ANNEAU 80
Gamme de plafonniers en plâtre HD. High strength plaster ceiling lamps, for direct lighting.
lighting 2018210
ANNEAUXdesign Atelier Sedap
920
660
80
1120
860
80
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
ANNEAUX
ANNEAU détail
lighting 2018
3170 ANNEAU 80 Design Atelier Sedap
3170_26 13 KGPlafonnier - Flex LEDs HP / 3 100 ° K / 24V / 52 W / 5 400 lm
Warm white LEDs and power supply included
IP 20
3170_27 Plafonnier - Flex LEDs RVB/RGB / 24V / 41 W / Télécommande radio (RF)
LEDs and power supply included
IP 20 13 KG
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3170_29 Plafonnier - Flex LEDs HP / 2 800 ° K / 24V / 52 W / 5 400 lm
LEDs and power supply included
IP 20 13 KG
3170_31 Plafonnier - Flex LEDs THP / 3 000 ° K / 24V / 70 W / 6 670 lm / IRC > 90
LEDs and power supply included
IP 20 13 KG
3170_32 Plafonnier - Flex LEDs THP / 2 700 ° K / 24V / 70 W / 6 670 lm / IRC > 90
LEDs and power supply included
IP 20 13 KG
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
3171 ANNEAU 100 Design Atelier Sedap
3171_26 17 KGPlafonnier - Flex LEDs HP / 3 100 ° K / 24V / 66 W / 6 800 lm
Warm white LEDs and power supply included
IP 20
3171_27 Plafonnier - Flex LEDs RVB/RGB / 24V / 51 W / Télécommande radio (RF)
LEDs and power supply included
IP 20 17 KG
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3171_29 Plafonnier - Flex LEDs HP / 2 800 ° K / 24V / 66 W / 6 800 lm
LEDs and power supply included
IP 20 17 KG
3171_31 Plafonnier - Flex LEDs THP / 3 000 ° K / 24V / 88,4 W / 8 400 lm / IRC > 90
LEDs and power supply included
IP 20 17 KG
3171_32 Plafonnier - Flex LEDs THP / 2 700 ° K / 24V / 88,4 W / 8 400 lm
LEDs and power supply included
IP 20 17 KG
211
3164/COUPOLE 1003162/COUPOLE 753160/COUPOLE 42
Gamme de plafonniers en plâtre HD. High strength plaster ceiling lamps, for direct lighting.
COUPOLES 42 & 75
lighting 2018212
COUPOLESdesign Atelier Sedap
COUPOLES 42 & 100
COUPOLES
C
M
J
CM
MJ
CJ
CMJ
N
Plaf. Coupoles.pdf 1 03/01/13 16:57
90
420
590
C
M
J
CM
MJ
CJ
CMJ
N
Plaf. Coupoles.pdf 1 03/01/13 16:57
150
750
910
C
M
J
CM
MJ
CJ
CMJ
N
Plaf. Coupoles.pdf 1 03/01/13 16:57
1000
1170
200
lighting 2018
3162 COUPOLE 75 Design Atelier Sedap
3160 COUPOLE 42 Design Atelier Sedap
3164 COUPOLE 100 Design Atelier Sedap
3160_26 5 KGCoupole - Flex LEDs HP 160 cm / 3 100 ° K / 24V / 31 W / 3 200 lm
Warm white LEDs and power supply included
IP 20
3160_27 Coupole - Flex LEDs 160 cm RVB/RGB / 24V / 24 W / Télécommande radio (RF)
LEDs and power supply included
IP 20 5 KG
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3160_29 Coupole - Flex LEDs HP 160 cm / 2 800 ° K / 24V / 31 W / 3 200 lm
LEDs and power supply included
IP 20 5 KG
3160_31 Coupole - Flex LEDs THP 160 cm / 3 000 ° K / 24V / 41,6 W / 3 952 lm
LEDs and power supply included
IP 20 5 KG
3160_32 Coupole - Flex LEDs THP 160 cm / 2 700 ° K / 24V / 41,6 W / 3 952 lm
LEDs and power supply included
IP 20 5 KG
3162_26 11 KGCoupole - Flex LEDs HP 260 cm / 3 100 ° K / 24V / 50 W / 5 200 lm
Warm white LEDs and power supply included
IP 20
3162_27 Coupole - Flex LEDs 260 cm RVB/RGB / 24V / 39 W / Télécommande radio (RF)
LEDs and power supply included
IP 20 11 KG
3162_29 Coupole - Flex LEDs HP 260 cm / 2 800 ° K / 24V / 50 W / 5 200 lm
LEDs and power supply included
IP 20 11 KG
3162_31 Coupole - Flex LEDs THP 260 cm / 3 000 ° K / 24V / 68 W / 6 422 lm
LEDs and power supply included
IP 20 11 KG
3162_32 Coupole - Flex LEDs THP 260 cm / 2 700 ° K / 24V / 68 W / 6 422 lm
LEDs and power supply included
IP 20 11 KG
3164_26 18 KGCoupole - Flex LEDs HP 340 cm / 3 100 ° K / 24V / 66 W / 6 800 lm
Warm white LEDs and power supply included
IP 20
3164_27 Coupole - Flex LEDs 340 cm RVB/RGB / 24V / 51 W / Télécommande radio (RF)
LEDs and power supply included
IP 20 18 KG
3164_29 Coupole - Flex LEDs HP 340 cm / 2 800 ° K / 24V / 66 W / 6 800 lm
LEDs and power supply included
IP 20 18 KG
3164_31 Coupole - Flex LEDs THP 340 cm / 3 000 ° K / 24V / 88,4 W / 8 400 lm
LEDs and power supply included
IP 20 18 KG
3164_32 Coupole - Flex LEDs THP 340 cm / 2 700 ° K / 24V / 88,4 W / 8 400 lm
LEDs and power supply included
IP 20 18 KG
213
3163/COUPOLE STYLE 75
Gamme de plafonniers en plâtre HD. High strength plaster ceiling lamps, for direct lighting.
lighting 2018214
COUPOLES STYLEdesign Atelier Sedap
COUPOLES STYLE
C
M
J
CM
MJ
CJ
CMJ
N
Plaf. Coupoles.pdf 1 03/01/13 16:57
90
420
590
C
M
J
CM
MJ
CJ
CMJ
N
Plaf. Coupoles.pdf 1 03/01/13 16:57
150
750
910
C
M
J
CM
MJ
CJ
CMJ
N
Plaf. Coupoles.pdf 1 03/01/13 16:57
1000
1170
200
3163 COUPOLE 75 STYLE Design Atelier Sedap
3161 COUPOLE 42 STYLE Design Atelier Sedap
3165 COUPOLE 100 STYLE Design Atelier Sedap
3161_26 6 KGCoupole - Flex LEDs HP 160 cm / 3 100 ° K / 24V / 31 W / 3 200 lm
Warm white LEDs and power supply included
IP 20
3161_27 Coupole - Flex LEDs 160 cm RVB/RGB / 24V / 24 W / Télécommande radio (RF)
LEDs and power supply included
IP 20 6 KG
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
3161/COUPOLE STYLE 42 3161/COUPOLE STYLE 100
lighting 2018
3161_29 Coupole - Flex LEDs HP 160 cm / 2 800 ° K / 24V / 31 W / 3 200 lm
LEDs and power supply included
IP 20 6 KG
3161_31 Coupole - Flex LEDs THP 160 cm / 3 000 ° K / 24V / 41,6 W / 3 952 lm
LEDs and power supply included
IP 20 6 KG
3161_32 Coupole - Flex LEDs THP 160 cm / 2 700 ° K / 24V / 41,6 W / 3 952 lm
LEDs and power supply included
IP 20 6 KG
3163_26 12 KGCoupole - Flex LEDs HP 260 cm / 3 100 ° K / 24V / 50 W / 5 200 lm
Warm white LEDs and power supply included
IP 20
3163_27 Coupole - Flex LEDs 260 cm RVB/RGB / 24V / 39 W / Télécommande radio (RF)
LEDs and power supply included
IP 20 12 KG
3163_29 Coupole - Flex LEDs HP 260 cm / 2 800 ° K / 24V / 50 W / 5 200 lm
LEDs and power supply included
IP 20 12 KG
3163_31 Coupole - Flex LEDs THP 260 cm / 3 000 ° K / 24V / 68 W / 6 422 lm
LEDs and power supply included
IP 20 12 KG
3163_32 Coupole - Flex LEDs THP 260 cm / 2 700 ° K / 24V / 68 W / 6 422 lm
LEDs and power supply included
IP 20 12 KG
3165_26 20 KGCoupole - Flex LEDs HP 340 cm / 3 100 ° K / 24V / 66 W / 6 800 lm
Warm white LEDs and power supply included
IP 20
3165_27 Coupole - Flex LEDs 340 cm RVB/RGB / 24V / 51 W / Télécommande radio (RF)
LEDs and power supply included
IP 20 20 KG
3165_29 Coupole - Flex LEDs HP 340 cm / 2 800 ° K / 24V / 66 W / 6 800 lm
LEDs and power supply included
IP 20 20 KG
3165_31 Coupole - Flex LEDs THP 340 cm / 3 000 ° K / 24V / 88,4 W / 8 400 lm
LEDs and power supply included
IP 20 20 KG
3165_32 Coupole - Flex LEDs THP 340 cm / 2 700 ° K / 24V / 88,4 W / 8 400 lm
LEDs and power supply included
IP 20 20 KG
215
Appliques / plafonniers en plâtre HD, éclairage LED direct.Wall / ceiling lamps in high strength plaster, direct LED lighting.
3173/PLAF CARRÉ
lighting 2018216
PLAFdesign Atelier Sedap
3172 PLAF ROND Design Atelier Sedap
Panneau LEDs - 1 530 lm / 3 000 °K / Driver inclu / Driver included 3172_06
P. maxi: 18 W
IP 20
3173 PLAF CARRÉ Design Atelier Sedap
Panneau LEDs / 1 920 lm / 3 000 °K / Driver inclu / Driver included 3173_06
P. maxi: 25 W
IP 20
PLAF
3172/PLAF ROND3172/PLAF ROND
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
360
60
360
360
360
60
lighting 2018 217
lighting 2018218
PROFIL TUBESdesign Atelier Sedap
Plafonniers en plâtre HD, éclairage LED direct.Wall lamps in high strength plaster, direct LED lighting.
3096, 3097 & 3098/TUBE
3096_02
3096 TUBE 120 Design Atelier Sedap
1 KG
3097_02
3097 TUBE 200 Design Atelier Sedap
1,5 KG
3098_02
3098 TUBE 300 Design Atelier Sedap
2,2 KG
IP 20 850°C
IP 20 850°C
IP 20 850°C
MR16 dichroïque halogène ou LED
P. maxi: 50 W / GU10 - 230V
MR16 dichroïque halogène ou LED
P. maxi: 50 W / GU10 - 230V
MR16 dichroïque halogène ou LED
P. maxi: 50 W / GU10 - 230V
PROFIL & TUBE
110
300
110
200
110
120RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
lighting 2018 219
3097_16 1,5 KGIP 20 850°C LED COB - 230/240V / 36° / 9,5 W / 760mA / 3 000 °K / IRC > 90 gradable TRIAC
P. maxi: 50 W / GU10 - 230V
3098_16 1,5 KGIP 20 850°C LED COB - 230/240V / 36° / 9,5 W / 760mA / 3 000 °K / IRC > 90 gradable TRIAC
P. maxi: 50 W / GU10 - 230V
1885/MOUCHARABIEH 3
1579/VOILE
Gamme de plafonniers en plâtre HD. High strength plaster ceiling lamps, for direct lighting.
lighting 2018220
VOILEdesign Didier Cornille
3135/PETITE VOILE
VOILE
180
850
850
115
400
400
lighting 2018 221
1579_03 Fluocompact - Alimentation électronique / Electronic power supply
P. maxi: 2 X 36 W / 2G10
1579 VOILE Design Didier Cornille
15 KGIP 20
3135_03 Fluocompact 2D ou Retrofit LED (ampoule non fournie)
P. maxi: 28 W / GR10q
3135 PETITE VOILE Design Didier Cornille
4 KGIP 20
Voir applique VOILE Pages 124-125
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
1579_06 LED COB 26,7 W / 900mA / 3 000 °K / 3 720 lm 15 KGIP 20 850°C
Option dimmable : 1-10V / DALI / PushDim
1885/MOUCHARABIEH 3
Gamme de plafonniers en plâtre HD. High strength plaster ceiling lamps, for direct lighting.
lighting 2018222
MOUCHARABIEHdesign Didier Cornille
3011/MOUCHARABIEH 13012/MOUCHARABIEH 2
MOUCHARABIEH
275
275
80
350
80
350
600
600
140
lighting 2018 223
1885_03 Tube circulaire ballast électronique
P. maxi: 55 W / 2GX13
1885 MOUCHARABIEH 3 Design Didier Cornille
15,8 KG
3012_03 Fluocompact 2D ou Retrofit LED (ampoule non fournie)
P. maxi: 28 W / GR 10q
3012 MOUCHARABIEH 2 Design Didier Cornille
3 KG
3011_03 Fluocompact 2D ou Retrofit LED (ampoule non fournie)
P. maxi: 28 W / GR 10q
3011 MOUCHARABIEH 1 Design Didier Cornille
2,2 KG
IP 20 850°C
IP 20 850°C
IP 20 850°C
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
Voir appliques MOUCHARABIEH Pages 160-161
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
1983/PLAFONNIER ROND
1982/PLAFONNIER CARRÉ
224 lighting 2018
ROND & CARRÉdesign Atelier Sedap
Plafonniers en plâtre HD. High strength plaster ceiling lamps, for direct lighting.
1743, 1982 & 1983
1743/PLAFONNIER COMPACT
1983_03 Tube circulaire - Ballast électronique - PMMA satiné diffusant
P. maxi: 55 W / 2GX13
1983 PLAFONNIER ROND Design Atelier Sedap
7,3 KG
1982_03 Tube circulaire - Ballast électronique - PMMA satiné diffusant
P. maxi: 55 W / 2GX13
1982 PLAFONNIER CARRÉ Design Atelier Sedap
7,3 KG
1743_01 Retrofit E27 - P. maxi: 75 W
1743 COMPACT PLÂTRE & VERRE Design Atelier Sedap
2,7 KGIP 20 850°C
IP 20 850°C
IP 20 850°C
Verre dépoli / Frosted glass
1743, 1982 & 1983
ø 530
80
530
530
80
315
118
ø 315
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
Option: Ballast électronique gradable / Dimmable electronic ballast (1-10V ou DALI)
Option: Système de détection haute fréquence / High frequency presence sensor
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
RÉFÉRENCE SOURCES CARACTÉRISTIQUES POIDS ORIENTATION
1743_06 LED COB - 14,5 W / 230-240V / 2 320 lm / IRC > 80 2,7 KG
Verre dépoli / Frosted glass
IP 20 850°C
225lighting 2018
1983_06 LED COB - 26,7 W / 900mA / 3 000 °K / 3 720 lm 7,3 KGIP 20 850°C
Option dimmable : 1-10V / DALI / PushDim
1982_06 LED COB - 26,7 W / 900mA / 3 000 °K / 3 720 lm 7,3 KGIP 20 850°C
Option dimmable : 1-10V / DALI / PushDim
SYSTÈME BLADE
1. 2. 3. 4.
5. 6. 7. 8.
9. 10.
SYSTÈME MICRO BLADE
1. 2. 3. 4.
6. 7. 8.
9. 10. 11. 12.
NOTICES DE POSE
Notices de pose détaillées disponibles sur www.sedap.com / Detailed mounting instructions downloadable on www.sedap.com
lighting 2018226
ENCASTRÉS
1. 2. 3. 4.
5. 6. 7.
NOTICES DE POSE
Notices de pose détaillées disponibles sur www.sedap.com / Detailed mounting instructions downloadable on www.sedap.com
NOTICE DE POSE / MOUNTING INSTRUCTIONS
Étape 1 Découper le flexible à la longueur désirée (sécable tous les 10 cm).
Souder si nécessaire pour relier 2 parties du flexible et/ou souder les fils d’alimentation
Soder the joint between the two parts of the flex and/or solder weld the power wires maintaining the polarity (+/-).
Attention! Ne jamais raccorder plus de 5 mètres de flexible. Les premières LED alimentées pourraient être endommagées.
Étape 3 Installer et connecter à l’alimentation 24V DC. L’alimentation doit être choisie en fonction de la longueur
Install and connect ti 24V DC power supply. Choose the power supply according to the length of the connected flex
Étape 4
Avant tout branchement, la bobine doit être impérativement déroulée entièrement.
Coller le flexible sur le profil aluminium après nettoyage de la surface de collage. Coller ensuite le profil aluminium
Étape 2
Clean up the aluminium profile and affix the flex to it. Glue the aluminium profile into the plaster profile
Cut the flex to the requested dimension (the flex is divisible every 10 cm).
en prenant soin de respecter la polarité (+/-).
Be careful not to join more than 5 meters of flex as this may cause damage to the first LEDs.
du flexible alimenté (1 mètre consomme 15 W). Pour 5 mètres, prendre une alimentation de 100 W minimum.
(1 meter needs 15 W). For 5 meters, use a 100 W power supply as a minimum.
The flex winding must be completely unwound before any connection.
dans le produit en plâtre choisi (corniche ou élément encastré) à l’aide d’une colle silicone ou polyuréthane.
(cornice or recessed element) with either silicon or polyurethan glue.
lighting 2018 227
FABRICATION SPÉCIALE & ADAPTATION DE PRODUITS
Notre savoir-faire et notre expé-rience dans le domaine du «sur-mesure» nous permettent de réaliser tout type de projets à partir de plans originaux.
Notre bureau d’étude et notre équipe technique se tiennent à la dispo-sition des cabinets d’architecture et des maîtres d’ouvrage afin d’étudier la fai-sabilité, le prix et les délais de toute réalisation sur mesure.
Ce service «sur-mesure» permet de donner une réponse aux besoins et aux rêves de chacun. We have a long experience and proven know-how in customized production of all types of designs based on your original drawings.
Our design departement and techni-cal staff are the disposal of architec-tural firms and building contractors for feasability studies and price estimates for all one-of-a-kind designs.
Thanks to this custom-made service, we can provide a solution to every one’s dreams and expectations.
lighting 2018228
FABRICATION SPÉCIALE & ADAPTATION DE PRODUITS
lighting 2018 229
RÉFÉRENCE / NOM
1444
1445
1465
1486
1487
1523
CHÊNE1543
PAGE(S)
1562
144-145
140-141
140-141
144-145
160-161
160-161
140-141
158-159
136-137
1810 CHATS
1813 LAPIN
1817 PLÂTRE ET VERRE
1818
1814 NOUNOURS
1824
142-143
154-155
154-155
142-143
132-133
154-155
198-199
1564
1571
136-137
136-137
202-203
1833 ÉVOLUTION
1834 MOUCHARABIEH PM
1835 MOUCHARABIEH MM
1836 FEUILLE
1871
202-203
176-177
176-177
158-159
148
1660
1666
1707 OCÉAN
1710 MOUCHARABIEH GM
1711 VANILLE
100-101
100-101
150-151
176-177
146-147
1744 BANDEAU COMPACT
1745 TRANSPARENCE V. & P.
164-165
164-165
187 CALE
189 LIGNE
191 CORNICHE
193 CORNICHE
195 CORNICHE
197 CORNICHE
198 CORNICHE
743 BLADE
740 BLADE
742 BLADE
741 BLADE
60-61
60-61
62-63
62-63
62-63
62-63
48-51
48-51
48-51
744
745
746
748
750
751
754
759
760
761
48-51
48-51
48-51
48-51
48-51
48-51
48-51
16-19
44-47
764
765
770
772
35
35
36-37
30-31
866 MINI X-BLADE
870 MICRO X-BLADE
876 MICRO X-BLADE
795 COUPOLE 100 STYLE
796 COUPOLE 150
793 COUPOLE 75 STYLE
794 COUPOLE 100
792 COUPOLE 75
840 X-BLADE
846 X-BLADE
58-59
58-59
58-59
12-15
08-11
12-15
08-11
08-11
58-59
58-59
860 MINI X-BLADE 58-59
755
758
48-51
16-19
INDEX
BLADE
BLADE
BLADE
BLADE
MICRO BLADE CIRCLE 42
MINI BLADE
MICRO BLADE CROSS 60/120
BLADE
BLADE
BLADE
BLADE
MICRO BLADE CIRCLE 75
MICRO BLADE CURTAIN 1
MICRO BLADE CROSS 90/90
MICRO BLADE 35
MICRO BLADE 50
188 AILE 60-61
190 DOUCINE 60-61
192 CORNICHE 62-63
194 CORNICHE 62-63
767
768
769 MICRO BLADE CIRCLE 200
16-19
16-19
16-19
MICRO BLADE CIRCLE 100
MICRO BLADE CIRCLE 150
771 36-37MICRO BLADE 63
773 34MICRO BLADE 50 TURN OUT
775 MICRO BLADE ANGLE 40
791 COUPOLE 42 STYLE
790 COUPOLE 42
12-15
08-11
1317
1333
1339
138-139
138-139
138-139
1311 138-139
1357
1380
140-141
158-159
202-203
RÉFÉRENCE / NOM PAGE(S) RÉFÉRENCE / NOM PAGE(S)
41
62-63
1427
1442
1563
160-161
48-51
1549 ÉTOILES 156-157
1579 220-221VOILE
1595 172-173BOLIDE
1594 172-173ÉCLIPSE
1572
ELLIPSE
1730 164-165MINI-COMPACT
1732 126-127BRIC
1738 144-145
1739 162-163COMPACT V. & P.
1740 162-163DOUBLE ÉCLAIRAGE
1741 162-163COMPACT
1809 PLÂTRE ET VERRE
1743 164-165PLAFONNIER COMPACT
1885 222-223MOUCHARABIEH 3
1886 198-199QUARTZ
HALO
TOMTOM
PETIT ROND
CARRÉ
CHARME
1930 EDGE 20
1931
1932 EDGE 32
118-121
118-121
118-121
1933 EDGE 62
1934 EDGE 92
1935 EDGE 122
1962 FLAM
1965 SPHÈRE
1966 SLOT
1967 SQUARE
1982 PLAFONNIER CARRÉ
1983 PLAFONNIER ROND
118-121
118-121
118-121
98-99
98-99
98-99
98-99
224-225
224-225
1961 EGG 98-99
EDGE 28
lighting 2018230
199 CORNICHE 62-63
756 MICRO BLADE CURTAIN 2 41
738 MICRO X-BLADE 35
739 MICRO X-BLADE 35
58-59
58-59 900 COUPOLE RIVOLI 14-15
901 COUPOLE OVALE 08-11
798 COUPOLE GOUTTE 75
799 COUPOLE GOUTTE 42
797 COUPOLE ORIGAMI
08-11
08-11
08-11
780 U-BLADE 120
781 U-BLADE 120
782 U-BLADE 135
52-53
52-53
54-55
779 MICRO BLADE CADRE 39
783 54-55U-BLADE 135
787 52-53V-BLADE 170
786 52-53V-BLADE 170
789 102-103SLIM LINE
788 102-103SLIM LINE
99 SUPPORT LED 64-65
124 STYLE LOUIS XV 64-65
125 STYLE EMPIRE 64-65
126 STYLE LOUIS XV 64-65
127 STYLE CLASSIQUE 64-65
133 STYLE LOUIS XV 64-65
730 MICRO BLADE 25 28-29
731 MICRO BLADE 25 R2 28-29
732 MICRO BLADE 25 R4 28-29
733 ECO BLADE PLAN 42-43
734 ECO BLADE CORNICHE 42-43
737 MICRO BLADE PLINTHE 38
3042 SLOT XL5
3043 TIQAL CARRÉ
3055 SAQQARA
3057 DÉ
96-97
84-85
126-127
113
3060 HAUSSMANN
3061 STAR
3062 DIAMANT
3065 TIQAL ROND
3066 TIQAL 30°
3067 TIQAL DOUBLE
3071 IPL TBT 12-1
86-87
86-87
86-87
84-85
84-85
84-85
88-89
3010 VANILLE PM
3011 MOUCHARABIEH 1
3015 LIGHT
3022 SUCRE 120
3023 SUCRE 90
3024 SUCRE 60
3026 GEMME
3030 SLOT XL2
3031 SLOT XL1
3029 SLOT XL3
3032 LIA PLÂTRE & VERRE
146-147
222-223
152-153
122-123
122-123
122-123
171
96-97
96-97
96-97
160-161
3083 SUCRE 60 IP 44
3084
3094 MINI AUDIO
3095 MINI QUARTZ
TUBE 120
150-151
150-151
206-207
206-207
218-219
3125 DAG ELLIPSE
VENUS 35
VENUS 55
3159 TROCADÉRO 90
3160 COUPOLE 42
3161 COUPOLE 42 STYLE
3104 CRISTALLOGRAPHIE
3124 DAG ROND
3131 BISCUIT ROND
80-81
170
170
196-197
212-213
214-215
149
80-81
156-157
3097 TUBE 200 218-219
3132 BISCUIT RECTANGLE
3133 FORMAT GM
3134 VOILE PM
3137 ATOLL
3158 TROCADÉRO 60
156-157
174-175
168-169
196-197
3143 MÉRIDIEN 60
3140 TROCADÉRO 30
3141 TROCADÉRO 60
3142 MÉRIDIEN 30
3162 COUPOLE 75
116-117
114-115
114-115
116-117
212-213
3072 IPL TBT 12-2
3073 IPL TBT 12-3
3074 SUCRE LED 30
3075 SUCRE LED 50
3077 AGRAFE
3079 FORMAT PM
3078 DOUBLE AGRAFFE
88-89
88-89
124-125
124-125
130-131
128-129
130-131
TERRE 25 206-207
3090 AUDIO 1 200-201
3091 AUDIO 2 200-201
3092 AUDIO 3 200-201
3136 ATOLL 168-169
3041 SLOT XL4 96-97
INDEX
3098 TUBE 300 218-219
3164 COUPOLE 100
3165 COUPOLE 100 STYLE
3170 ANNEAU 80
212-213
214-215
210-211
3163 COUPOLE 75 STYLE 214-215
3171 ANNEAU 100 210-211
3172 PLAF ROND 216-217
3173 PLAF CARRÉ 216-217
3180 ANNEAU 80 194-195
3181 ANNEAU 100 194-185
3190 MINI TUBE 206-207
3200 SLIM SLOT XL 94-95
3201 SLIM SLOT XL 94-95
3202 SLIM SLOT XL 94-95
3203 SLIM SLOT XL 94-95
3204 ANTIQAL ROND 83
3205 ANTIQAL DOUBLE 83
3206 TROCADÉRO ROND 82
3207 TROCADÉRO DOUBLE 82
3220 AGRAFE 90 130-131
3222 CRÉPIDULA 168-169
3223 ANA 112
3135 PETITE VOILE 220-221
RÉFÉRENCE / NOM PAGE(S) RÉFÉRENCE / NOM PAGE(S) RÉFÉRENCE / NOM PAGE(S)
3096
3126
3127
3128
128-129
3012 MOUCHARABIEH 2 222-223
SUCRE 90 IP 44
lighting 2018 231
3114 TRAPPE TECHNIQUE 90-91
3115 TRAPPE TECHNIQUE 90-91
3116 TRAPPE TECHNIQUE 90-91
3117 TRAPPE TECHNIQUE 90-91
3274 COUPOLE RIVOLI 192-193
3260 PETITE RUCHE 190-191
3261 MOYENNE RUCHE 190-191
3262 GRANDE RUCHE 190-191
3273 ASTRE 182-183
3288 PERLES 184-187
3287 PERLES 184-187
ABC MOTS 180-181
3271 PERLES 184-187
3270 PERLES 184-187
3269 PLISSÉ 188-189
3268 PLISSÉ 188-189
3267 PLISSÉ 188-189
3266 PLISSÉ HORIZONTAL I 106-107
3265 SIMPLE VERTICAL I 106-107
3286 PLISSÉ HORIZONTAL D/I 106-107
3285 SIMPLE VERTICAL D/I 106-107
3272 PERLES 108-109
3229 SPOTS COMPACTS 80-81
3263 RUCHE 111
3215 FALDA 110
3236 204-205
3237 204-205
3276 204-205
3283 204-205
3284 204-205
3241 MINI TIQAL ORIENTABLE 78-79
3245 MICRO TIQAL MR11 78-79
3246 MICRO TIQAL MR11 78-79
3264 NUAGE 152-153
3230 SPOTS COMPACTS 80-81
3235 MICRO TIQAL LED 78-79
3226 SLOT XL ELLIPSE 94-95
3231 MINI TIQAL 1 76-77
3232 MINI TIQAL 2 76-77
3233 MINI TIQAL 3 76-77
3234 MINI TIQAL 4 76-77
3225 QUADRAT 15 92-93
3224 QUADRAT 10 92-93
3240 TORTUE 154-155
3277 SOLEIL ROND 68-69
3278 SOLEIL CARRÉ 68-69
3277 SOLEIL RECTANGLE 68-69
3282 LUCIO 70-71
3256 MINI STAR 72-73
3257 TRIO 74-75
3258 TROCADÉRO 74-75
3259 ANGLE 74-75
7000 MICRO BLADE DOOBLE 50 26-27
7002 MICRO BLADE DOOBLE 100 26-27
7004 U-BLADE 120 X 120 54-55
7005 U-BLADE 120 X 120 54-55
7006 MICRO BLADE DOOBLE 35 26-27
7008 SIMPLE BLADE 24
7009 NANO BLADE 25
7010 T-BLADE 8 56-57
7011 T-BLADE 10 56-57
7012 MB 50 SEGMENT NU 32-33
7013 MB 50 SEGMENT SPOT 32-33
7014 MB 50 SEGMENT TRAPPE 32-33
7015 MB 50 SEGMENT LB XS5 32-33
Fabrice BERRUX direction artistique / art direction
Tous les modèles de la collection Atelier Sedap sont protégés par des droits d’auteur en raison de leur valeur artistique et de la nature créative et originale de leur conception. Des droits d’auteur officiels et légaux assurent une protection com-plète des créations d’Atelier Sedap pendant toute la vie du designer et au-delà. Atelier Sedap est fortement impliquée dans le combat contre des copies, en partenariat avec d’autres fabricants et des associations de protection de designers.All the models from the Atelier Sedap collection are protected by copyrights and patents, due to their artistic value and original creative nature. Official, legal copyrights and patents ensure a complete protection of the Atelier Sedap creations during all the life of the designer, and even longer. Atelier Sedap is highly involved in the fight against copies, in par-tnership with other manufacturers and design protection associations.
Atelier Seda
p se
rés
erve
le
droi
t d’
appo
rter
tou
tes
modi
fica
tion
s au
x pr
odui
ts p
rése
ntés
dan
s ce
cat
alog
ue.
Phot
os n
on c
ontr
actu
elle
s.©
Copy
righ
t. T
ous
droi
ts r
éser
vés.
Atel
ier Sedap is entitled to modify the products shows in this catalogue.
Phot
os and colours may vary to the actual item.
© Co
pyright. All rights reserved.
Julie FIGUEROA ZAFIROdesign graphique / graphic design
Pages 18-46-47 Maison en GirondeArchitecte : Bassam El Okeily
Page 18 Conservatoire de PuteauxMaître d’ouvrage : Ville de PuteauxMaître d’oeuvre : Brossy & associés
Fabrice BERRUX Yves BLAYO Didier CORNILLE
Rémi FONTAINE
Neil POULTONIrina PETRUK Michel TORTEL
DESIGNERS
Arsenii LEONOVITCH
Julie FIGUEROA ZAFIRO
Auguste AJAR
lighting 2018
Alain BRUX
232
Bruno HOUSSINItamar HARARI
Atelier Seda
p se
rés
erve
le
droi
t d’
appo
rter
tou
tes
modi
fica
tion
s au
x pr
odui
ts p
rése
ntés
dan
s ce
cat
alog
ue.
Phot
os n
on c
ontr
actu
elle
s.©
Copy
righ
t. T
ous
droi
ts r
éser
vés.
Atel
ier Sedap is entitled to modify the products shows in this catalogue.
Phot
os and colours may vary to the actual item.
© Co
pyright. All rights reserved.
3 avenue du Professeur Jean Rouxel44481 CARQUEFOU Cedex - FRANCE
Tél. +33 2 40 99 85 25 - Fax +33 2 40 35 26 22Email : [email protected]
D 22
5 - 0
4/20
18
Top Related