Valves & ManifoldsFor Process Instrumentation

R

Process Industry

Needle valves and manifolds

� Pressure 6,000 … 10,000 psig (420 … 689 bar)

� Temperature (PTFE) -54 °C … +210 °C

� Standard bore diameter 4 mm � Standard material AISI 316L � Sizes from 1/4” NPT to 1” NPT � Meets B31.1 & B31.3 requirements

� T-bar for easy use � PTFE coating, Graphoil (optional) � Special materials (Duplex, Monel, Hastelloy) etc. � Variety of connections (NPT, Welded.

Flanged, Tube Fitting and BSP

Needle valvesIV10, IV11

Block-and-bleed-valvesIV20, IV21

3-valve manifoldsIV30, IV31

5-valve manifoldsIV50, IV51

Needle valves and manifolds

Monoflanges and monoblocks

� Compact block, block and bleed, double block and bleed

� Connections from 1/2" … 2" (DIN 15 … DN50) ASME, B16.5 RF and RTJ

� Valve with anti blow-out body and non-rotary indicator

� Hydrostatic test certificates available

� Process interface in compact valve � Body made of one cast piece � Bore diameter max. 10 mm process connections

according to ASME B16.5 RF and RTJ; NPT connections according to ASME B1.20.1

� ANSI category from class 150 ... 2,500

Monoflanges T-bar IVM

Monoflanges O.S.&Y. IVM

Monoblock DBB IVB

Injection DBB IVJ

Monoflanges and monoblocks

High pressure valves

The high pressure valves are designed for the fluid control of gaseous and liquid media. There are many versions for applications with temperatures from -65 … 600 °F (from -54 … +315 °C).

� Pressure 15,000 … 60,000 psig (1,034 … 4,137 bar) � Connections from conical thread 1/4" … 9/16" � Non-rotary body prevents jamming and possible scratches � Standard material stainless steel 316L and PTFE

Actuator Accessories HP Ball valves HP Check valves HP

High pressure valves

Accessories

We offer a wide range of accessories for various applications

Mini needle valves

Adapter flanges Swivel/oval adaptors Angled valves 90°

Ball valvesGauge cocks

Snubbers Overpressure protector Cooling elements

WIKA Instrument, LP1000 Wiegand BoulevardLawrenceville, GA 30043Toll Free 1-888-WIKA-USA (945-2872)Tel (770) 513-8200 Fax (770) 338-5118valves.us@wika.com • www.wika.com

RF048 - 300 2/19

WIKA® is a registered trademark of WIKA Alexander Wiegand SE & Co. KG., used under license by WIKA Instrument, LP. Copyright 2019 WIKA Instrument, LP. All Rights Reserved.

Monoflanges and monoblocksMonoflanges are used as a compact, economical solution to replace complex multi valve assemblies, together with monoblocks which control the transition between the process and instrument.

The advantages and benefits are evident with reduced potential leak paths, reduction in weight, and much lower maintenance costs.

High pressure valvesHigh pressure valves are suitable for fluid control of gases and liquids with pressures from 15,000 … 60,000 psig (from 1,034 … 4,137 bar). We offer a wide range of versions suitable for manual operations in temperature ranges from -65 … +600 °F (from -54 … +315 °C).

Needle valves and manifoldsBonnet version needle valves are available in various options, materials and connections. One-way valves are suitable for static pressure and applications with liquids.The 2-way and manifold valves are suitable for special applications with differential pressure, together with venting and draining facility. Our process instruments meet B31.1 and B31.3 requirements.

AccessoriesAdapters, fittings, cocks and seals are available in many different materials and dimensions with high accuracy tolerances.