Scan Group Go Download the Free Encelium Edge Device ...

2
WIRELESS ALC AAAAAAAAAAAAAAAA EN-ALC-ZB-BK 45585 Attention: Pour réduire le risque d'incendie et de choc électrique, ne pas relier les sorties de différents circuits de Classe 2 Caution: To reduce the risk of fire or electric shock, do not interconnect the outputs of different Class 2 circuits Max ambient temperature +55˚C +65˚C 120-277 Vac E-Ballast 20A 10A 120-347 Vac E-Ballast (Canada Only) 20A 10A 120-347 Vac Resistive 20A 10A 120-347 Vac Tungsten 20A 10A 120-347 Vac General Purpose 20A 1.5HP 10A Absolute maximum ratings: Max branch-circuit overcurrent protection 20A Purple/Grey: 0-10V Class 1 or Class 2, 30mA sink 120-277 Vac Motor 6NA8 Energy Management Equipment Subassembly Emergency Lighting and Power Equipment Appareil d’eclarage de secours For Plenum Use Made in Canada yymmdd POSITIVE SIGNAL NEGATIVE GB2 SENSOR UL 916 / UL 924 / UL 2043 FCC ID:H79DFZM-E7210 IC ID:4259B-DFZM7210 Class 2 18V–24V, 40 mA AAAAAAAAAAAAAAAA Made in Canada EN-WS-SC3-ZB-WH 45574 FCC ID:H79DFZM-E7220 IC ID:4259B-DFZM7220 Wallstation - Wireless 3-Scene Control Install per installation instructions and electrical and building codes. Max ambient temperature +50˚C AAAAAAAAAAAAAAAA yymmdd 3 SCENE WS AAAAAAAAAAAAAAAA EN-SCPPH- 0450-ZB 45570 AAAAAAAAAAAAAAAA yymmdd Made in Canada STD RANGE SENSOR AAAAAAAAAAAAAAAA Setup require barcode. Do not discard. EN-EC-ZB-SW 56330 6NA8 Made in Canada FCC ID:H79DFZM-E7210 IC ID:4259B-DFZM7210 Max ambient temperature +40˚C For Plenum Use AAAAAAAAAAAAAAAA MAC: 00:00:00:00:00:00 yymmdd POE-IN NC POE-IN Upgradable to Encelium Networked LMS Encelium Edge AAAAAAAAAAAAAAAA EDGE CTRL AAAAAAAAAAAAAAAA Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Encelium Edge Controller Number: Installed Area: Meeting Room Meeting Room Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Encelium Edge Controller Number: Installed Area: Cube Bank 1 Cube Bank 1 Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Encelium Edge Controller Number: Installed Area: Cube Bank 2 Encelium Edge Standalone Wireless Light Management System Quick system installaon and setup guide Encelium Edge System setup (default setup shown) Note: Mobile app screen shots shown may not be the latest versions available. Download the Free Encelium Edge Mobile Setup App Scan — the device barcodes for an area Group — the barcodes for that area Go — to the next area Cube Bank 2 Device barcode locator map Wireless Sensor Wireless Control Module (WALC, WADR, WPL) Wireless Wallstation Encelium Edge Controller Connected Lighting Module (CLM) in luminaire Group Go to next area Scan, Group, and Go Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Encelium Edge Controller Number: Installed Area: Lobby Lobby Scan

Transcript of Scan Group Go Download the Free Encelium Edge Device ...

WIRELESS ALC

AAAAAAAAAAAAAAAA

EN-ALC-ZB-BK 45585

Attention: Pour réduire le risque d'incendie et de chocélectrique, ne pas relier les sorties de différents circuits de Classe 2

Caution: To reduce the risk of fire or electric shock, donot interconnect the outputs of different Class 2 circuits

Max ambient temperature +55˚C +65˚C120-277 Vac E-Ballast 20A 10A120-347 Vac E-Ballast (Canada Only) 20A 10A120-347 Vac Resistive 20A 10A120-347 Vac Tungsten 20A 10A120-347 Vac General Purpose 20A

1.5HP10A

Absolute maximum ratings:

Max branch-circuit overcurrent protection 20APurple/Grey: 0-10V Class 1 or Class 2, 30mA sink

120-277 Vac Motor 6NA8

Energy ManagementEquipment SubassemblyEmergency Lighting andPower Equipment

Appareil d’eclarage de secoursFor Plenum Use

Made inCanada

yymmdd

POSITIV

E

SIG

NAL

NEGATIV

E

GB2 SENSOR

UL 916 / UL 924 / UL 2043FCC ID:H79DFZM-E7210IC ID:4259B-DFZM7210

Class 218V–24V, 40 mA

AAAAAAAAAAAAAAAA

Made inCanada6NA8

EN-WS-SC3-ZB-WH45574

FCC ID:H79DFZM-E7220IC ID:4259B-DFZM7220

Wallstation - Wireless 3-Scene Control

Install per installation instructionsand electrical and building codes.Max ambient temperature +50˚C

AAAAAAAAAAAAAAAAyymmdd

3 SCENE WS

AAAAAAAAAAAAAAAA

EN-SCPPH

-0450-ZB45570

AAAAAAAAAAAAAAAA

yymmdd

Made in Canada

STD RANGE SENSOR

AAAAAAAAAAAAAAAASetup require barcode.

Do not discard.

EN-EC-ZB-SW56330

6NA8

Made in Canada

FCC ID:H79DFZM-E7210IC ID:4259B-DFZM7210

Max ambient temperature +40˚CFor Plenum Use

AAAAAAAAAAAAAAAAMAC: 00:00:00:00:00:00

yymmdd

POE-IN

NC

POE-IN

Upgradable toEncelium Networked LMS

Encelium Edge

AAAAAAAAAAAAAAAA

EDGE CTRL

AAAAAAAAAAAAAAAA

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Encelium Edge Hardware Barcode Logbook

Encelium Edge Controller Number: Installed Area:

Note:1. Each Encelium Edge Controller covers a space of up to approximately 10,000 sq ft (929 sq m)

and/or up to 1,000 nodes.2. Additional pages can be downloaded from www.osram-americas.com/simpluxinstall.

SAVE THESE PAGES FOR FUTURE REFERENCE

Placesticker

here

MeetingRoom

Placesticker

here

Placesticker

here

Placesticker

here

Meeting Room

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Encelium Edge Hardware Barcode Logbook

Encelium Edge Controller Number: Installed Area:

Note:1. Each Encelium Edge Controller covers a space of up to approximately 10,000 sq ft (929 sq m)

and/or up to 1,000 nodes.2. Additional pages can be downloaded from www.osram-americas.com/simpluxinstall.

SAVE THESE PAGES FOR FUTURE REFERENCE

Placesticker

here

Cube Bank 1

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Cube Bank 1

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Encelium Edge Hardware Barcode Logbook

Encelium Edge Controller Number: Installed Area:

Note:1. Each Encelium Edge Controller covers a space of up to approximately 10,000 sq ft (929 sq m)

and/or up to 1,000 nodes.2. Additional pages can be downloaded from www.osram-americas.com/simpluxinstall.

SAVE THESE PAGES FOR FUTURE REFERENCE

Placesticker

here

Cube Bank 2

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Encelium Edge Standalone Wireless Light Management SystemQuick system installati on and setup guide

Encelium Edge System setup(default setup shown)

Note: Mobile app screen shots shown may not be the latest versions available.

Download the Free Encelium Edge

Mobile Setup App

Scan — the device barcodes for an area

Group — the barcodes for that area

Go — to the next area

Cube Bank 2

Device barcode locator map

Wireless Sensor

Wireless Control Module(WALC, WADR, WPL)

WirelessWallstation

Encelium Edge Controller

Connected Lighting Module (CLM) in luminaire Group

Go to next area

Scan, Group, and Go

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Encelium Edge Hardware Barcode Logbook

Encelium Edge Controller Number: Installed Area:

Note:1. Each Encelium Edge Controller covers a space of up to approximately 10,000 sq ft (929 sq m)

and/or up to 1,000 nodes.2. Additional pages can be downloaded from www.osram-americas.com/simpluxinstall.

SAVE THESE PAGES FOR FUTURE REFERENCE

Placesticker

here

Lobby

Placesticker

here

Placesticker

here

Lobby

Scan

• Install batteries (supplied) in eachWireless Wallstation.

• Refer to “Device Barcode Locator Map” on opposite page of this document.

• Locate and remove barcodes on hardware at perforation and affi x to Hardware Barcode Logbook supplied with Encelium Edge controller.

• Mount wallstations (refer to the installation manual supplied in packaging).

• Connect the Encelium Edge Controller power supply unit to a NEMA-approved junction box (refer to the installation manual supplied in packaging).

• Connect supplied CAT-5/power cord from the power supply unit to the Encelium Edge Controller.

• Remove the controller barcode at perforation and affi x to Hardware Barcode Logbook supplied with Encelium Edge controller.

• Install 2-AA batteries (supplied) in each Wireless Sensor.

• Refer to “Device Barcode Locator Map” on opposite page of this document.

• Locate and remove barcodes on hardware at perforation and affi x to Hardware Barcode Logbook supplied with Encelium Edge controller.

• Mount sensors (refer to the installation manual supplied in packaging).

Encelium Edge System quick installati on guide

For installation and technical questions go to www.encelium.com/contact/

UnpackBox Contents

InstallEncelium Edge Controller

InstallWireless Sensors

InstallWireless Wallstations

How to log your device barcodes Three easy steps to saving your device codes

Identify — area on new page of Hardware Barcode

Logbook (i.e., Meeting Room, Conference Room 1, Cube Bank 1, etc.)

Remove — barcode from device and affi x to Hardware Barcode Logbook sup-

plied with Encelium Edge Controller.

Stick — barcode on appropriate page in the Hardware Barcode Logbook. Save for set up staff and future reference.

Identi fyand record area name

Remove

Example:Wireless Area Lighting Control Module

Note: You must fi rst obtain the barcode from the ENCELIUM EDGE Controller and stick it on the inside front cover of the Hardware Barcode Logbook to designate the “space” name. Then, proceed to each area within the space as described above.

Wiring Test Tool — verifi es electrical connection

Wiring Test Tool — NOT applicable for installation

Copyright © 2021 Digital Lumens, Incorporated. All rights reserved. Digital Lumens, the Digital Lumens logo, We Generate Facility Wellness, SiteWorx, LightRules, Lightelligence, Encelium, the Encelium logo, Polaris, GreenBus and any other trademark, service mark, or tradename (collectively “the Marks”) are either trademarks or registered trademarks of Digital Lumens, Inc. in the United States and/or other countries, or remain the property of their respective owners that have granted Digital Lumens, Inc. the right and license to use such Marks and/or are used herein as nominative fair use. Due to continuous improvements and innovations, specifications may change without notice.

LMS122 Rev 2 04-21

InstallWireless Control Modules (WALC, WADR, WPL, or CLM)

Remove starter kit from the box. Starter kit includes:

• Encelium Edge Lighting Controller

• Encelium Edge Controller power supply unit and cable

• Wiring Test Tool (battery included)

Literature enclosed:• Quick System Installation and

Setup Guide

• Encelium Edge Hardware Barcode Logbook

• Encelium Edge System

• Connect the Encelium Edge Controller power supply unit to a NEMA-approved junction box (refer to the installation manual supplied in packaging).

• Connect supplied CAT-5/power cord from the power supply unit to the Encelium Edge Controller.

• Remove the controller barcode at perforation and affi x to Hardware Barcode Logbook supplied with Encelium Edge controller.

• Using the wiring test tool, confi rm wiring is installed properly.

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Placesticker

here

Encelium Edge Hardware Barcode Logbook

Encelium Edge Controller Number: Installed Area:

Note:1. Each Encelium Edge Controller covers a space of up to approximately 10,000 sq ft (929 sq m)

and/or up to 1,000 nodes.2. Additional pages can be downloaded from www.osram-americas.com/simpluxinstall.

SAVE THESE PAGES FOR FUTURE REFERENCE

Placesticker

here

Lobby

Sti ck