Pulse Pressure Loading Rig - KOSORI
Transcript of Pulse Pressure Loading Rig - KOSORI
For further information, please visit the website at www.kosori.org, or contact:
Assistant Prof. Yeon Chul Ha, COOTel. +82-51-510-3281 E-mail. [email protected]
Prof. Jeom Kee Paik, PresidentTel. +82-51-510-2429 E-mail. [email protected]
www.kosori.orgPulse Pressure Loading Rig
Toy PPLR Control and data acquisition
Dynamic modeStatic mode
Pressure sensing
Test Examples
Key Components
D
CARING FOR LIFE, SAFETY, AND THE ENVIRONMENTCARING FOR LIFE, SAFETY, AND THE ENVIRONMENT
Test Specimen Clamping Frame Clamping Ring
Film Diaphragm
02 03
Pulse Pressure Loading Rigwww.kosori.org www.kosori.org
Pulse Pressure Loading Rig
Nonlinear impact response testing of plate panels under blast pressure loads arising from explosionsExperimental study on blast - resistant characteristics of plate panels
Objectives
Overview
Maximum blast pressure: 2.5bar Maximum test panel size: L1,000 x W1,000 (mm)Blast pressure sensor: 1 MS/s (PCD-1MP) Design code: BS 5500 TO BS 1501-151- 430ATest data: Pressure, strain, temperature Data acquisition: 8 ch. (DEWE-31-16), 1MS/s (per ch.)
KOSORI at PNU KOSORI at PNU
Lateral deflection of plate panels under blast pressure can be tested.Blast pressure load profiles designated in advance, e.g., triangular type can be applied, with varying rise time, peak pressure or duration time of blast pressure loads. This test facility was donated by the Impact Research Centre of the University of Liverpool in the U.K.
Features of Test Facility
Specification
Principle
PressureChamber VI
End Cover Plate Support Frame
PressureChamber VII
Test Specimen