CE

Security Level:Internal Only

Introduction to the Working Principles of the M2000 -CME

www.huawei.com

Principles of the M2000 -CME V200R011 (Basics)

ISSUE1.1

HUAWEI TECHNOLOGIES Co., Ltd. HUAWEI Confidential

Wireless Product Rollout Dept.

� The CME is a GUI configuration solution of the Single RAN.

� Based on the typical application process, this document describes the working principles of the CME from the aspect of the location of the CME, configuration policies of the CME software and hardware, and working principles. In addition, it describes the frameworks of the CME manuals.


CME manuals.

You can understand the following contents through You can understand the following contents through

this training:

� Location of the CME in the OSS solution of the

Single RAN

� Basic principles of the CME

� Configuration Procedure of the CME

� Integrated version


Integrated version

� Standalone version

11 CME of the Single RANCME of the Single RAN

2 Basic Concept of the CME

3 Working Principles and

Configuration Procedure of

the CME


the CME

Location of the CME

� The CME is a part of the OSS solution, and is the core of the integrated configuration solution for multi-mode

radio network provided by Huawei. In addition, the CME supports typical scenarios of UMTS and GSM networks,

such as initial site deployment, network capacity expansion, BTS swapping, and routine configuration adjustment. � The CME11.0 provides a solution for the unified management configuration of the GSM/UMTS/LTE (GUL).

� For the GSM network, the BSC6900 working with the CME provides the GUI data configuration function.

For the UMTS network, the CME is an evolution of the WRAN CME V100R008.� For the UMTS network, the CME is an evolution of the WRAN CME V100R008.

� For the LTE, the CME works with the eRAN2.0/eRAN2.1 and provides functions such as site deployment and routine maintenance.

� The CME11.0 supports the SRAN6.0 and the downward overall solution.


Features of the CME

Advanced Tools� Batch data configuration� Configuration of parameters

Scenario/workflow optimization

� Planning in advanceConcurrent operation� Configuration of parameters

for site deployment, neighboring cells, and algorithms

� BTS swapping� ARFCN modification� 3GPP northbound interface

� Concurrent operation� Frequency replanning

workflow� Swapping workflow

Quality Assurance

� Consistency check based on

Reduction of Operation and Maintenance Cost

� Reducing the complexity during the site deployment


� Consistency check based on the entire network

� Check for the data validity and service rules

site deployment� Unifying the maintenance solution

for the M2000� Unifying the management of

activating configuration scripts

Delivery Features of the CME V200R011

Software Platform

�Supporting Sun mini-server + Solaris + Sybase

Value-Added Service

�MBTS integrated configuration�RRU resource allocationSolaris + Sybase

� Supporting HP/ATAE mini-server + Linux + Oracle�Sharing the platform with the M2000�Providing a single-server version�Providing a Chinese version� Distributed mode� High availability (HA)�Security�Reliability�Component-based release

� RAN 13.0/12.0/11.0 / 11.1� GBSS 13.0/12.0/9.0/8.x� LTE 2.0/ LTE 2.1

NE Access

�RRU resource allocation�BTS swapping crossing NEs and versions�Frequency replanning on the entire network�Site deployment in batches�Adjustment of neighboring cell relations�Modification of algorithm parameters in batches�3GPP northbound configuration�Consistency check�Panoramic view


Advantages of the CME

� GUL Multi-mode Configuration

� The configuration on the GSM, UMTS, and the LTE is synchronized and the configuration consistency on the GSM, UMTS, and the LTE is checked to

ensure that the GUL resources are centrally managed.� In the BSC6900, the GSM, UMTS, LTE, and MBTS use the unified device panel to implement the centralized management of the GSM/UMTS devices.

� GUI Enhancement

� The TOPO site deployment, BTS networking, TRXs of each cell, and timeslot allocation can be viewed in GUI mode on the LMT of the BSC6000.

Therefore, the BTS configuration and resource allocation can be displayed clearly.

Display the transmission


New TOPO site deploymentTraditional site deployment wizard

Display the transmission

relations intuitively.

Cascade, multi-link

Ring topology

Display the timeslot on the GUI.

Advantages of the CME (Continued)

� Improvement on Operation Efficiency� The network-level configuration is centralized.

� Single BSC � multiple BSC

� Configuration of a single BTS � Configuration of BTSs in batches through the templates� The BTS swapping within a BSC and that between the BSCs can be implemented. In addition, the data � The BTS swapping within a BSC and that between the BSCs can be implemented. In addition, the data

adjustment of neighboring cells can be implemented automatically, saving time for script preparation by

network optimization engineers.

� The files configured in offline mode dynamically take effect, improving the file configuration in offline mode.

� On the LMT, DAT files configured in offline mode can take effect only after the BSC is reset. In this case, services are greatly affected.

� On the CME, after files are configured in offline mode, corresponding MML scripts are generated so

that these files can take effect when the MML scripts are delivered dynamically. In this case, the BSC is

not reset and services are not affected.� Compared with the LMT of BSC6000, the CME supports the multi-user concurrent configuration in online

mode.The data browsing capability and retrieval capability on the entire network are greatly improved.


� The data browsing capability and retrieval capability on the entire network are greatly improved.

� Security� The CME provides the function of data check on the entire network before data is activated, including the

check for completeness, redundancy, and consistency.

� The CME supports the data rollback in key scenarios.

� The CME supports the parameter comparison. That is, the CME compares the data that has taken effect and

the template to check whether data configuration is correct.

Advantages of the CME (Continued)

� Functions of SingleRAN6.0 Working with the CME� MBTS data is configured through the GUI or exporting the negotiation data.

� The menu entrance is unified and the operations are simple. In addition, the GU/GL multi-mode MBTS can be created

integrally, using the method for single-mode MBTS configuration.

� This ensures the consistency of common parameters in G/U or G/L mode.� This ensures the consistency of common parameters in G/U or G/L mode.

� Capacity of a single-mode MBTS is expanded.

� A single-mode MBTS can be expanded to a dual-mode MBTS in any mode from GSM, UMTS, or LTE.

� This ensures the consistency of common parameters in G/U or G/L mode.

� Capacity of a dual-mode MBTS is expanded.

� A dual-mode MBTS can be expanded to a triple-mode MBTS in any mode from G/U, U/L, or G/L.

� This ensures the consistency of common parameters in G/U /L mode.

� The MBTS uses the unified device panel to configure the dual-mode device panel so that data can take effect on both G/U and

G/L side simultaneously.

� The MBTS device data is configured intuitively.

� The MBTS device boards in G/U, G/L, and G/U/L mode can be displayed in a unified way.

� The configuration parameters of MBTS common boards are modified.


� Parameters of the MBTS common boards are configured in a unified way.

� Parameters of common boards are configured intuitively.

� Parameters of common boards in G/U, G/L, and G/U/L mode are displayed in a unified way.

� This ensures the consistency of common board parameters in G/U, G/L, and G/U/L mode.

� MBTS templates are managed in a unified way.

� The consistency check result is enhanced.

� The list of MBTSs to be deployed is exported.

� The dynamic spectrum sharing (DSS) is supported.

1 CME of the Single RAN

2 Basic Concept of the CME2 Basic Concept of the CME

3 Working Principles and

Configuration Procedure of

the CME


the CME

Version of the CME

� Integrated version (or online, network mode)

� The CME can be installed on the M2000 (integrated version) or installed independently (standalone version),

depending on the OSS network and project process.

� Integrated version (or online, network mode)� The CME is installed on the M2000.� The communication between the CME and NEs is

implemented through the M2000 client.

GBTS NodeB


� Standalone version (or offline mode)� The CME is installed on a PC.� The CME cannot communicate with NEs directly. NE data is obtained

manually and scripts are delivered manually.

� The Windows operating system is supported.

GBTS

Software and Hardware Deployment (1)

� Integrated into the M2000

� Software platform� Software platform� Solaris + Sybase

� Linux + Oracle

� Hardware platform� Sun

� HP

� ATAE


Software and Hardware Deployment (2)


� Citrix networking

solution

Deployment — CME Integrated Version

� The CME is installed on the

M2000 server.

NMS

CME Client

GBSS Business

WRAN Business

MBSC/MBTS Business

LTE Business M2000 server.

� Data is exchanged in the

following modes:

� Extracting network configuration

data through channels of the

M2000

� Delivering configuration data

through channels of the M2000 by

Corba

DB Link

CME Adapter

iMAP Platform

M2K Mediation

iMAP Platform

CME Business Server

N-Itf(Corba)

Client Framework


executing related commandsM2K Slave ServerM2K Master Server

NE

DB

Deployment — CME Standalone Version

� The standalone CME is for internal use only.

� The CME is installed on a PC.

� The Windows operating system is supported.

CME Client

GBSS WRAN MBSC/MBTS LTE � The Windows operating system is supported.

� The standalone CME is independent of the M2000 or

other NEs.

� The CME is used in the pure offline scenario.

� Data is exchanged in the following modes:

� Extracting NE configuration data by importing the

configuration files exported by NEs

� MBSC: bcp file

� NodeB: XML configuration file

� eNodeB: XML configuration file

� Supporting backing up or recovering NE

Corba

DB Link

CME Business Server

Client Framework

GBSS Business

WRAN Business

MBSC/MBTS Business

LTE Business


configuration data of the CME

� Recovering or exchanging data between CME

standalone (offline) versions by backing up data

CME Server

SQL Server

Triple Area

� Triple area: current area, planned area, and fallback area

� Current area

� Current area is a network data mirroring area used to save the configuration data of the live network.

� Data in the current area is read-only and cannot be modified directly to ensure the security of the

network.

� Only one current area is available for a network system.

� Through the CME, the data of the live network can be periodically or automatically synchronized to the � Through the CME, the data of the live network can be periodically or automatically synchronized to the

current area. Alternatively, users can manually synchronize the data of the live network to the current

area.

� Planned area

� Planned area is a data planning area that is created with the data of a certain NE system.

� Users can perform data planning in the planned area. Different users can create their respective

planned areas. The planned areas are independent of each other.

� After implementing data planning in the planned area, users can export the generated data scripts.

After executing the data scripts to the NE, users can make the data take effect.

� Fallback area

� The rollback command scripts are generated in the fallback area to perform rollback.

When configuration adjustment effects are not ideal, the CME can quickly roll back to the original


� When configuration adjustment effects are not ideal, the CME can quickly roll back to the original

configuration status.

� Currently, the CME supports the rollback on the GSM side in only three scenarios: RNP import,

modification of radio algorithm parameters in batches, ARFCN import. In addition, the CME supports

the rollback in all adjustment scenarios on the UMTS side in versions later than BSC6900

V900R012C01 (UMTS only). For LTE, CME supports the rollback in all adjustment scenarios..

Comparison Between Integrated Version and Standalone Version

Integrated Version Standalone Version

Recommended scenario

Online data configuration based on the M2000, such as BTS swapping, network optimization adjustment, and resource statistics.

Initial data configuration and capacity expansion in a large scale.

License The functions are controlled by the license of the M2000.Basic function package: The GBSS 9.0 version is provided in the CME

Huawei engineers: A temporary license whose validity is three months is released on the Support Web site.Basic function package: The GBSS 9.0 version is provided in the CME

V200R011 basic function package for free when the GBSS is upgraded. The CME V200R011 must be charged in new markets.

released on the Support Web site.

Configuration area

One current area, multiple planned areas and multiple fallback areas. No current area, one planned area, and one fallback area.

Function 1. Configuration functions, such as site deployment and site swapping, are the same.2. In the standalone version, current area-based functions, such as AVC, are unavailable. The script executor is unavailable.

Obtaining data of the live network

Synchronize data on the BSC, NodeB, and eNodeB (through the data channel between the M2000 and NEs).

Export data by running the EXP CFGSYNFILE command after logging in to the NE through the Web LMT.

Activating the Script executor Script configuration/processing in batches on the Web LMT


script

Database Sybase (working with the SUN server on the M2000)Oracle (working with the HP or ATAE server on the M2000)

MSDE (SQL Server 2005 is recommended.)

Documentation Product manuals and version documents Version documents for standalone version:Installation guideOperation guideFor detailed configuration operations, see the product manuals.

Software Structure

� CME client software, which is used to display the G UI

� In the integrated version, the CME client software is installed on the maintenance terminal where the M2000 client is installed.

� In the standalone version, the CME client software is installed on the PC.

� CME server software, which is used to control the t raffic flow and execute configuration operations by communicating

with the CME client

� In the integrated version, the CME server software is installed on the M2000 server and communicates with applications on

the M2000 to obtain the NE information.

� In the standalone version, the CME server software is installed on the PC.

� Database

� In the integrated version, the CME and the M2000 share one database, which is used to store NE configuration data.

� In the standalone version, the MSDE database is used and is installed on the PC.


Software structure in the

integrated version

In the standalone version: The

CME client, CME server, and the database are installed on the same PC.

Version Compatibility

� M2000� The recommended matching version is M2000 V200R011.

� BSC� The recommended matching version is BSC6900 V900R013, BSC6900 V900R012, and BSC6900 V900R011, which can

provide configuration capability on transmission, device, and radio parameters.� The matching BSC6000 only provides the capability for radio layer and BTS swapping that works with the GBSS CME

V100R005.V100R005.� The matching BSC6800 and BSC6810 are used only for the BTS swapping crossing specified versions.

� GBTS� The GBTS does not directly match the CME. In this case, the CME matches the GBTS versions that are supported by the

BSC6900 versions that match the CME.� NodeB

� The NodeB versions that work with the CME are the NodeB versions that work with the BSC6900/RNC.� The CME only matches the baseline versions of the NodeB, such as SPC100, SPC 200, and SPC 300 and their non-baseline

versions. The interface configured for NodeB products remains unchanged. For example, if the CME works with SPC 100, then the CME works with versions such as SPC1XX or SPH1XX.

� The following are principles of the CME to release the NodeB components.� For NodeB versions released after a CME version is released, the matching components are required and are released

with the NodeB version. When the component is used, refer to the Release Notes of the component to confirm the CME


with the NodeB version. When the component is used, refer to the Release Notes of the component to confirm the CME version working with the component.

� The preceding components will be contained in the following CME version.� LTE

� The eRAN 2.1/eRAN 2.0 is recommended.� MBTS

� The MBTS versions working with the CME depend on the versions of LTE, NodeB, and GBTS working with the MBTS.

Data Configuration Method — General Configuration

� The general configuration function provides a gener al method for editing non-equipment parameters on t he table.� On the GUI, select the level of the configuration o bject, such as BSC, BTS, cell, TRX, or sector cell (LTE) level. Then,

select a configuration object with the selected lev el to display the configuration GUI.� On the GUI, all data of the configuration object is displayed on the table. Users can filter or edit d ata on the table.

Level of the configuration

object, which can be a

BSC, BTS, cell, TRX, or

sector cell (LTE) level

Editing area

of the tableArea for editing

a single object


List of objects

with the selected

level

Data Configuration Method — Configuration Express

� The configuration express function provides a metho d for editing data of a NE based on the table, depe nding on service requirements. The configuration express function is similar to the general configuration function. The difference is that the configuration express function is more convenie nt for some service requirements.

� The configuration express function varies with supp orted objects and can be divided into several types , such as BSC/radio express, NodeB/BTS express, cell configur ation express, and neighboring cell configuration e xpress.


Data Configuration Method — Batch Data Modification

� The batch data modification function provides a met hod for quickly modifying multiple parameter values of objects with the same type to t he same value under one or several NEs.

Entrance for batch

data modification in

the application menu

Configuration objects

under one or several

NEs can be modified

in batches.

Parameter values


Parameter values

of several objects

can be modified to

the same value.

Right-click the configuration NE to display the GUI for batch data modification.

Data Configuration Method — Import and Export

� The data import and export functions are provided b ased on different scenarios.� The data import and export functions are used to mo dify or create object data in batches. Different fr om

the batch data configuration function, the data imp ort function does not require changing the paramete r values to the same. Instead, the planned data can b e imported.


Data Configuration Method — Device Panel

� The device panel function is used to add or delete device parameters of the NEs.� Whether data configuration of common boards is conf licted can be displayed on the MBTS

device panel.

Right-click the selected NE to display the GUI of the device panel


Data Configuration Method — Typical Scenario

� The typical scenario function is designed focusing on typical configuration scenarios, such as swapping, TOPO site deployment, and HSPA.


1 CME of the Single RAN

2 Basic Concept of the CME

3 Working Principles and 3 Working Principles and

Configuration Procedure of Configuration Procedure of

the CMEthe CME


the CMEthe CME

General Operation Procedure — Integrated Version

� 0. Get data from the live network to current area

� Current area is stored in M2000.

� Every user of one M2000 has the same current area.

� This action is called Synchronize NE.

� 1. Create a planned area

� Planned area is stored in M2000.

Each user has a planned area.� Each user has a planned area.

� Copy NE data from the current area.

� 2. Data configuration in planned area

� Create, delete, move or modify BSC, BTS, or NodeB.

� Adjust parameters.

� 3. Scripts

� Check the data conflict between the planned area and the current area.

� Generate MML/XML scripts.

� Activate scripts in NEs by the script executor.

� 4. AVC (Attribute Value Change)

� After the scripts are activated, the related NE sends an AVC message to the

current area, indicating the changes in the data configuration on the live network.


� The AVC message is also reported for changes in the data configuration due to

other causer except for activated scripts.

� The synchronization of data between the planned area and the current area is

triggered in firm real time.

Data Flow

� Three areas: live network, current area, and planned area.

� Interaction of data flow� Planned area � Current area: Data

modification in the planned area does not affect data in the current area.

� Planned area � live network: Data

Planned area

Creating, synchronization

Generating and activating scripts

� Planned area � live network: Data modification in the planned area takes effect on the live network by generating and activating data scripts. Before the changed data is delivered, data on the live network is not affected.

� Live network � current area/planned area: Data modification on the live network will be updated in the current area but cannot be updated in the planned area.

� Current area � planned area: By creating/synchronizing data in the planned area, some data in the current area is

Current areaLive

network

synchronization

Synchronization

activating scripts


area, some data in the current area is synchronized to the planned area.

� Current area � live network: Data in the current area is read-only and does not affect the live network.

Synchronization in the Current Area

� Synchronization mechanism

� Full synchronization: All configuration data is uploaded from the NE to the current area and the data previously saved in the current area is overwritten completely. The history data of the current area cannot be saved.

� Differentiated synchronization: The data modified in the MOC tables of the NE is uploaded to the current area. Therefore, the synchronization the NE is uploaded to the current area. Therefore, the synchronization efficiency is improved. The incremental synchronization is always used for daily operations.

� The incremental synchronization is supported since BSC6900.

� Synchronization method

� The data synchronization can be performed periodically, automatically, or manually. The data synchronization of the current area is performed in firm real time.

� The data synchronization is performed automatically in the following cases:

� The CME receives the AVC message reported by the NE and

receives no other messages within two minutes.


� A BSC is created on the M2000 and data synchronization has

been complete.

� Data synchronization has been performed on the NodeB or TGW

on the M2000.

� The script data has been successfully activated.

Creating a Planned Area

�Planning a planned area

�Based on the data in the current area, multiple planned areas can

be created and a network can be planned concurrently.

�The data conflicts between the planned areas can be found only

when the data in the planned areas takes effect on the live network.

Manage planning area

Modify planning data when the data in the planned areas takes effect on the live network.

If the data conflicts between the planned areas occur, the data in the

planned areas fails to take effect and are mutually overwritten. As a

result, the operation of the NE is affected.

�To prevent the data conflicts between the planned areas, data

planning engineers should rationally plan the data in the planned

areas (such as cell index or TRX index) to ensure that the data in the

planned areas is not mutually overlapped.

Creating a planned area:

M2000

Planning area ...

Modify planning data

Planning area

Create planning area

with current area data


�Creating a planned area: copy the data of NEs from the current

area to the planned area.

Current Area

Data Editing in the Planned Area

� General configuration: Users can configure the attribute of each object on the general configuration interface in GUI mode. The general configuration can be displayed in the following configuration views:

� Navigation tree: Object tree view, transmission tree view

� Configuration area: Device panel view, configuration object ObjectTree

� Network topology view

� Batch data modification view

� Configuration express view

� Wizard configuration: Users can complete the complex configuration task through the wizard.

� TOPO site deployment

� Swapping wizard

� Consistency check wizard

� File import and export: The configuration data generated by the external tools can be imported to

Network topology


generated by the external tools can be imported to implement batch configuration in an efficient manner.

� Importing the data negotiated for the site deployment

� Importing and exporting radio parameters

� Modifying cell attributes, frequencies, and TRX attributes in batches

Device panel

Check for Data Conflict

� Data conflict can be divided into the following typ es:

� Warning: Data conflict of this type may lead to activation failures.

� Users add a configuration object in the planned area but the object has been available on the live network.

� Users modify a configuration object in the planned area but the object has been deleted on the live network.

� Users delete a configuration object in the planned area but the object has been deleted on the live network.

Note that the data conflict is not checked between objects that have parent-child relations.

� Hint: Data conflict of this type occurs because a user modifies data in the planned area but the data has

been modified by another user and has been updated to the current area. Whether activation failures occur

depends on configuration rules on the live network.

� During the data configuration, users can check the data modification on the live network

through the AVC message and adjust data configurati on in time.

� After the data configuration is complete, users nee d to check whether data is conflicted.

� Compare user configuration data in the planned area with configuration data of the live network in the

current area to locate conflicted data.


current area to locate conflicted data.

� Users can adjust configuration data in the planned area based on the check result to ensure that the

subsequent activation is successful.

Generation of Scripts

� The CME supports two types of MML/XML file: differentiated data MML/XML file and full data MML/XML file.

� BSC and BTS: MML commands will be generated; NodeB and eNodeB: XML file will be generated.� Differentiated data MML/XML scripts: MML/XML configuration scripts are generated based on

modified contents.� This type of command is generated during the configuration of the planned area and is related to the

configuration process.

� This type of command supports the exporting of modified contents separately by exporting multiple

differentiated scripts in the same planned area.

� This type of command supports all configuration operations and is applicable to the scenarios such as parameter modification, radio network planning, and optimization.

� Full data MML/XML scripts: MML configuration scripts are generated based on objects.� This type of command supports the exporting of all configuration scripts based on the object selected

by users

– The exported objects include:

– BSC data, including data on the BSC, equipment, transmission, and radio network


– BSC data, including data on the BSC, equipment, transmission, and radio network– BTS data, including data on the BTS equipment, transmission, and radio network

– NodeB and eNodeB data, including all data of site.

� This type of command is generated according to the data in the planned area and is not related to the

configuration process.� This type of command is applicable to special scenarios such as initial network deployment or site

deployment.

Activation of Scripts

� Activation Type� Run the Bulk_Configuration command in

batches.� The efficiency for scripts to take effect is high.

� The entire script needs to be modified after the

script activation fails.

START

Upload

Active data

Manual start

Auto start

script activation fails.

� Run the MML command one by one.� The efficiency for scripts to take effect is low.

� The user interaction is large in number.

� A single command is modified after the script

activation fails.

� Activation Methods� Timed activation: The configuration script is activated at the time specified by the user.

� Stopped once an error occurs: The script activation is stopped immediately after an error occurs during a command execution. In this case, the script activation resumes after the command is modified or skipped.

Modify MML

Browse task

End

MML has errors


command execution. In this case, the script activation resumes after the command is modified or skipped.

� Skipping the error command: When error occurs during a command execution for activating the script, the

error command is skipped and the script activation resumes from the next command.

� Pre-activation: The NE creates a simulative digital environment for the M2000 to perform the pre-activation function. In this case, the M2000 can confirm whether data in the configuration files to be activated takes

effect.

Site DeploymentNetwork Expansion and Adjustment

Description

Network expansion and adjustment scenarios : Users export the current configuration data (BSC: .ZIP file, by using the Web LMT (EXP CFGSYNFILE; eNodeB: export from M2000). The exported data will be imported to the CME.

Obtaining data from the live network

General Operation Procedure — Standalone Version

Users start the client software before using the CME to configure data.

Site deployment scenario : GU: The CME provides the basic unit of data configuration files (ZIP files) based on NEs. Users can import a ZIP file to create an NE. They can also reconfigure an NE based on this file. LTE: create site using GUI or sumary.Network expansion and adjustment : Users create an NE on the CME and import the corresponding NE data obtained from the live network.

�Users reconfigure the data of an NE by using the CME client. The procedure is the same as that by using the integrated CME.

Users check the correctness of data through the consistency check function provided by the CME.

Starting the client software

Adding NEs

Configuring data

Starting the client software

Adding NEs

Configuring data


by the CME.

After data configuration and data check are complete, users export the MML/XML scripts for activating data on the live network.

Users activate data by using the Web LMT. (Note: The frequency refarming scripts exported from the standalone CME must be activated through the script executor provided by the integrated CME.)

Checking data

Exporting MML /XML

Activating MML/XML

Checking data

Exporting MML/XML

Activating MML/XML

Data in the Standalone Version

BSC/eNodeB Data NodeB Data Configuration Data

Source BSC: 1. Users can export the BSC data by running the EXP CFGSYNFILE command after logging in to the BSC6900 through the Web LMT.2. An example of minimal data is provided in the installation directory of the CME.LTE: export using LMT or M2000

NodeB data is exported through the LMT or M2000 of the NodeB.

Configuration data is transmitted among standalone versions and is generated by choosing Data Management > Export Data .

Content BCP files of a single BSCeNodeB: XML file

XML files of a single NodeB Compressed data packages in standalone versions for one or more selected BSCs (including all NodeBs under the BSCs)

Default name BSC: CMECfgSyncView.zipeNodeB: LMT.xml or M2000.xml

NodeBCfg.xml NEData.zip

Entrance


NE is selected based on each BSC/eNdeB.

Full Data XML Scripts Activation

� Scripts generated by CME could be activated in many ways: � Remote Commissioning on the M2000; � Local Commissioning Using a USB Storage Device in Combination with Remote Commissioning

on the M2000;� Local eNodeB Commissioning on the LMT .

� Refer to base station Commissioning Guide� Refer to base station Commissioning Guide

� Operation Steps of Remote Commissioning on the M200 0; � In CME, create site by GUI or summary importing;� In CME, Export Auto Deployment Configuration Data：

• After exporting from CME, user needs to create commissioning tasks, upload data, version file etc.

� On M2000: Start commissioning task. M2000 will commission NodeB/eNodeB automatically.

� Full Data XML Scripts of NodeB and eNodeB could also be activated by MML:� On Web LMT, using command: DLD CFGFILE, ACT CFGFILE to download and activate full data

XML scripts


XML scripts� Configuration adjustment：the incremental xml scripts generated by CME could not be activated

using Web LMT.

Incremental Scripts Activation: Method 1 ：Scripts Executor

� The Incremental Scripts generated by CME could be a ctivated using Scripts Executor.� Scripts Executor is embedded in integrated CME.� The difference between execution in standalone and integrated CME is:

� For standalone CME, the incremental scripts generated by standalone CME needs to be imported to integrated CME( Open scripts executor, create project, upload incremental scripts, and activate projects manually).，manually).，

� For integrated CME, it could jump to scripts executor and activate project automatically after exporting incremental scripts.

� Frequency refarming scenario: The verification of commands are different from batch commands.� When exporting incremental scripts, if scripts are service affected, the CME will pop out

messages for user to confirm the operations.� Operation steps on integrated CME:


Incremental Scripts Activation : Method 2 ：MML Commands

� This is only for GU BSC and BTS . The incremental scripts for

NodeB and eNodeB are XML file which could not be downloaded

and activated by MML commands.

� Batch Processing� Scripts are executed through the Batch window on the WEB LMT.� Multiple execution methods are provided for a better man-machine � Multiple execution methods are provided for a better man-machine

interaction.� The efficiency for delivering scripts to take effect is low.

� Batch Configuration� Scripts are delivered in batches by running the RUN BATCHFILE

command on the WEB LMT.� The efficiency for delivering scripts to take effect is high.

� Script Executor� Scripts are uploaded to the script executor provided by the integrated

CME.� The script executor is used in the frequency replanning scenario and

the method for checking commands in the scripts is different from that


in the batch configuration and batch processing.

� Consuming Time in Typical Scenarios� 4489 scripts are executed during the swapping of five BTSs, including

adjustment of network optimization data.� Based on the preceding condition, it is calculated that the swapping of

50 BTSs takes about two hours and six hours respectively in batch configuration and batch processing modes.

Mode Consuming Time (Unit: Second)

Batch Configuration 647

Batch Processing 1767

Thank YouThank You

www.huawei.com

CE

Documents

Transcript of CE