Batel f re v66

Kpis dégradés sur la U1_F3 cause IU, Pouvez-vous vérifier la TRANS du site

Actions déjà engagées :

Reboot FTM

Désolidarsation IPNB

L/U modules Radio & Systèmes

Réinjection de commissioning



Reboot FTM




En avance merci pour votre prise en charge.



Reboot FTM





Reboot FTM






Analyser les types de fichiers connus (récupération de fichier brut): si le système de fichier du disque est gravement endommagé ou non pris en charge, R-Studio recherche les modèles de données spécifiques ("signatures de fichiers") typiques de certains types de fichiers (documents Microsoft Office, jpg, etc.). Des types de fichiers connus peuvent être définis pour la personnalisation.

Reconnaissance et analyse syntaxique des schémas de partition (UNIX) de Basic(MBR), GPT et BSD et de la carte de partition Apple. Fonctionne avec Dynamic volumes (Windows 2000-2012/8.1) sur MBR et GPT.

Prise en charge des Espaces de stockage Windows (créés par Windows 8/8.1 et 10), des RAIDs logiciels Apple, et des Gestionnaires de volumes logiques Linux (LVM/LVM2). R-Studio peut automatiquement reconnaître et assembler les composants de ces gestionnaires de disques même si leurs bases de données ont été légèrement endommagées. Les composants dont les bases de données ont été gravement corrompues peuvent être ajoutés manuellement.

Récupération de RAID endommagé. Au cas où l'OS ne reconnaît pas votre RAID, vous pouvez créer un RAID virtuel depuis ses éléments constitutifs. De tels RAID virtuels peuvent être traités comme un vrai.Niveaux de RAIDs standards pris en charge : 0, 1, 4, 5, 6. Niveaux de RAIDs imbriqués et non-standards pris en charge : 10(1+0), 1E, 5E, 5EE, 6E. Prise en charge des délais de parité sur tous les niveaux applicables. Prise en charge des agencements de RAIDs spécifiés par le client.

http://www.unformat-unerase.com/fr/#2

http://www.r-studio.com/RAID_Recovery_Presentation.shtml

Paramètre de reconnaissance automatique RAID.R-Studio est capable de reconnaître l'ensemble des paramètres RAID 5 et 6. Cette fonctionnalité aide l'utilisateur à résoudre l'un des problèmes les plus difficiles de la récupération RAID.

Crée des FICHIERS IMAGES pour la totalité d'un disque dur, une partition ou une de ses parties. De tels fichiers images peuvent être compressés et divisés en différents fichiers pour les mettre sur CD/DVD/flash ou FAT16/FAT32/exFAT. Les fichiers images peuvent alors être traités comme des disques normaux.

La récupération de fichiers sur des partitions endommagées ou supprimées, des fichiers cryptés (NTFS 5), des flux de données alternatifs (NTFS, NTFS 5).

Récupération des données si: o FDISK ou d'autres outils de gestion de disques ont été lancés; o Un VIRUS s'est introduit ; FAT est endommagé ; MBR est détruit.

Reconnaît les noms localisés. Les fichiers récupérés peuvent être enregistrés sur n'importe quel disque (même réseau)

accessible par le système d'exploitation de l'hôte. Les fichiers récupérés peuvent être enregistrés sur un disque d'un ordinateur connecté à distance au lieu d'être transféré par le réseau sur un en local.

Prévisualisation des fichiers pour estimer les chances de récupération. La plupart des types de fichiers peuvent être prévisualisés même quand leurs applications ne sont pas installées.

Le contenu d'un fichier ou d'un disque peut être vu et édité avec l'éditeur avancé hexadécimal. L'éditeur supporte l'édition d'attribut de fichier NTFS.

Surveillance des attributs S.M.A.R.T.. R-Studio peut afficher les attributs S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology, soit Technique d'Auto-surveillance, d'Analyse et de Rapport en anglais) pour disques dur afin de surveiller leur état et de prédire les possibles défaillances. Il est conseillé d'éviter de travailler sur un disque dur si une alerte S.M.A.R.T. apparaît.

Intégration avec DeepSpar Disk Imager, un système d'imagerie HDD professionnel spécialement conçu pour la récupération des données de disques durs ayant des problèmes matériels. Une telle intégration permet à R-Studio d'accéder précisément et en profondeur aux disques durs ayant un certain degré de dysfonctionnement matériel. De plus, il permet d'exécuter la création d'images disque et l'analyse du disque simultanément. Autrement dit, chaque secteur auquel R-Studio accède sur le disque source est immédiatement cloné sur un disque clone, et toute autre opération de récupération de données sera effectuée à partir du disque clone afin d'éviter toute détérioration supplémentaire du disque source et de réduire le délai de traitement. Plus de détails sur...

Outil

NTFS/ReFS FAT Ext2/Ext3/Ext4

FS UFS/HFS/HFS+

Prix,

USD Obtenir CLUF

R-STUDIO network edition

179.99

R-STUDIO

79.99

R-Studio NTFS network edition

124.99

R-Studio NTFS

49.99

R-Studio FAT network edition

124.99

R-Studio FAT

49.99

R-Studio Technician License

899.00


http://www.r-studio.com/fr/DiskRecoveryHardware.shtml

http://www.r-studio.com/fr/Data_Recovery_Technician.shtml

https://secure.r-tt.com/fr/cgi-bin/Store?p=1






https://secure.r-tt.com/fr/cgi-bin/Store?PROD_3_1_QTY=1

R-Studio Demo

R-Studio Agent

R-Studio Emergency

Licence de volume

L'outil peut récupérer des fichiers sans distinction de taille L'outil peut récupérer des fichiers inférieurs à 256 ko Outil de

service

Récupération locale Récupération en réseau

Produits

R-Studio

R-Studio pour Mac

R-Studio pour Linux

R-Undelete

R-Drive Image

R-Crypto

R-Mail

R-Word

R-Excel

R-Wipe & Clean

R-Linux

R-Updater

Compatibilité

Assistance technique

Centre d'assistance

Demande d'assistance technique

Forum R-TT

Assistance clients

Console de l'utilisateur enregistré

FAQ Ventes

Obtenir une facture

Requête d'achat

Devis & Volume de licence

Conditions générales de vente

Distribution

Programme d'affiliation

Revendeurs

Distributeurs régionaux

Login

Configuration requise

http://www.r-studio.com/fr/Data_Recovery_Download.shtml

http://www.r-tt.com/fr/VolumeLicensing.shtml

http://www.r-studio.com/fr/

http://www.r-studio.com/fr/data_recovery_macintosh/

http://www.r-studio.com/fr/data_recovery_linux/

http://www.r-undelete.com/fr/

http://www.drive-image.com/fr/

http://www.r-tt.com/fr/data_security_software/

http://www.r-tt.com/fr/outlook_mail_recovery/

http://www.r-tt.com/fr/word_recovery/

http://www.r-tt.com/fr/excel_recovery/

http://www.r-wipe.com/fr/

http://www.r-tt.com/fr/free_linux_recovery/

http://www.r-tt.com/fr/update_software/

http://www.r-tt.com/fr/TechnicalSupport.shtml

http://www.r-tt.com/fr/SupportRequest.shtml

http://forum.r-tt.com/

https://secure.r-tt.com/fr/UserConsole.shtml

http://www.r-tt.com/fr/FAQ.shtml

http://www.r-tt.com/fr/GetInvoice.shtml

http://www.r-tt.com/fr/PurchasingRequest.shtml


http://www.r-tt.com/fr/BuyOnLine.shtml

http://www.r-tt.com/fr/Affiliate_Program.shtml

http://www.r-tt.com/fr/Resellers.shtml

https://secure.r-tt.com/fr/Distribution.shtml

https://secure.r-tt.com/distributor/login/





http://www.r-studio.com/fr/data_recovery_macintosh/Download.shtml

http://www.r-studio.com/fr/data_recovery_linux/Download.shtml

http://www.r-undelete.com/fr/Download.shtml

http://www.drive-image.com/fr/Drive_Image_Download.shtml

http://www.r-tt.com/fr/data_security_software/Download.shtml

http://www.r-tt.com/fr/outlook_mail_recovery/Download.shtml

http://www.r-tt.com/fr/word_recovery/Download.shtml

http://www.r-tt.com/fr/excel_recovery/Download.shtml

http://www.r-wipe.com/fr/Disk_Cleaning_Download.shtml

http://www.r-tt.com/fr/free_linux_recovery/Download.shtml

http://www.r-tt.com/fr/update_software/Download.shtml


Une plateforme compatible Intel utilisant Windows 2000/XP/ 2003/Vista/2008/ Windows 7/8/8.1/10 / Windows Server 2012.

Au moins 256 Mo de RAM, une souris, et assez d'espace disque pour les

Doté de nouvelles technologies uniques de récupération de données, R-Studio est la solution de

récupération de données la plus complète pour opérer sur NTFS, NTFS5, ReFS, FAT12/16/32,

exFAT, HFS/HFS+ (Macintosh), variantes petits et gros boutiens de UFS1/UFS2

(FreeBSD/OpenBSD/NetBSD/Solaris) et partitions Ext2/Ext3/Ext4 FS (Linux). Il utilise

également la récupération de fichiers bruts (analyse des types de fichiers connus) pour les

systèmes de fichiers gravement endommagés ou non reconnus. Il fonctionne sur les disques

locaux ou réseau, même si les partitions sont formatées, endommagées ou supprimées. Des

configurations de paramètres flexibles vous permettent un contrôle absolu sur la récupération

des données.

En plus d'être un outil complet de récupération de données, R-Studio inclut également: Un module de reconstruction RAID avancé. Un éditeur de texte et hexadécimal complet Un module complet de copie et d'image de disque réuni en un seul logiciel, qui fait de R-Studio

la solution idéale pour créer une station de travail de récupération de données.

Les outils R-Studio récupèrent des fichiers: Suppression hors de la Corbeille, ou lorsque la Corbeille a été vidée;

Supprimé par une attaque de virus ou une coupure de courant; Après que la partition avec les fichiers a été reformatée, même pour un système de fichier

différent;

Lorsque la structure de partition sur le disque dur a été changée ou endommagée. Dans ce cas, les outils R-Studio peuvent scanner le disque duren essayant de trouver des partitions précédentes et de récupérer les données de ces partitions.

Depuis le disque dur avec de mauvais secteurs. Le logiciel de récupération de données R-Studio peut d'abord copier le disque en entier ou une partie sous forme de fichier image et ensuite traiter le fichier image. C'est particulièrement utile lorsque de nouveaux mauvais secteurs apparaissent constamment sur le disque dur et que les informations restantes nécessitent d'être sauvegardées.

Caractéristiques R-Studio Version 7.x Version 6.x Version 5.x Version 4.x Version 3.x

Interface standard de style Windows Explorer. OS Hôte : Windows 2000, XP, 2003 Server, Vista, 2008 Server, Windows 7, Windows 8/8.1,

Windows Server 2012.

Récupération de données via un réseau. Les fichiers peuvent être récupérés sur des ordinateurs en réseau fonctionnant sous Win2000/XP/2003/Vista/2008/Windows 7/8/8.1/Windows Server 2012, Macintosh, Linux et UNIX.

Systèmes de fichiers pris en charge: FAT12, FAT16, FAT32, exFAT, NTFS,µTechnical

Training on 3G RF Optimization

Optimization is to

Keep track of network

Improve quality of network

To provide best network quality using any available spectrum analyzer

Accessibility, Retainability, Mobility

http://www.unformat-unerase.com/fr/Intelligent_Scan.shtml




http://www.data-recovery-software.net/fr/#network-recovery

CS – Circuit switch – voice

PS- Packet switch – Data services faster than 2G data service

Video = CS + PS

RSCP- Receive signal level of a particular CPICH (dbm)

Ec/Io – The CPICH quality

CPICH- Common Pilot indication channel – it is a broadcast for every cell

IRAT- Handover from 3G to 2G Inter Radio Access technology

Softer handover – Softer HO occur btw sector of the same site

Soft HO- Occur btw sectors of the different sites

3G Optimization

Top aspects of 3G optimization

Coverage Optimization

Call Drop Optimization

Handover & Neighbors Optimization

Quality -Interference & Pilot Pollution Optimization

1. Coverage

3G RSCP level

Good: RSCP ≥ -85 dBm

Fair: -95 dBm ≤ RSCP < -85 dBm

Poor: RSCP < - 95 dBm

RSCP

-65

-75Good

Radio

OkInterference

-85

-95

-105

-125

-6 -10 -14 -18 Ec/No

Coverage

Limited

Coverage limited

w/ interference

3G Coverage-Quality RSCP Ec/Io

Good > -95 dBm >= -6 dB

Radio OK > -95 dBm -6 >x>= -10 dB

Interference > -95 dBm < - 10 dB

Coverage Limited < -95 dBm >= -10 dB

Coverage Limited < -95 dBm < -10 dB

w/ interference

Coverage

Causes Poor Coverage

1. Poor coverage due to bad RSCP- Receive signal level < -95dbm

2. Poor Coverage due to Missing neighbors & handover failure 3. Faulty hardware. 4. Interference

1. Coverage Optimization

Ways to improve coverage in a network if any of the following issue occurs

Ways to improve coverage in a network if any of the following issue occurs

I. Poor coverage - RSCP

Ways to improve poor coverage

Antenna tilt

Antenna azimuth

Antenna location

Antenna height

Antenna type

Site location

New site

II. High interference and hence poor Ec/Io – High RTWP Ways to resolve high interference in other to improve coverage

Resolve High RTWP –Receive total wideband power

Change antenna azimuth

Check Feeder connector

Check external interference

III. Poor Coverage due to Missing neighbors Ways to resolve missing neighbors in other to improve coverage

Add missing neighbor cells

Check neighbor list from BSS engineer.

IV. Poor Coverage due to Pilot Pollution (too many cells present ) Ways to resolve pilot pollution in other to improve coverage

Antenna Adjustment - Azimuth

Antenna down tilt

Lower pilot CPICH power

V. Check hardware alarm, Loss of attenuation check – Feeders , connectors & Jumper

2. Call Drop

Causes of call drop

1. Poor coverage – Low signal strength

2. Handover failure

3. Missing Neighbors

4. Interference

5. Faulty Hardware

6. Pilot pollution

7. Signalling

2. Optimization of Call Drop

I. Call drop due to Poor coverage- Low signal strength

Ways to Optimize

Antenna tilt

Antenna azimuth

Antenna height

Antenna type

Antenna location

Site location

New site

II Call drop due to Handover failure

Ways to optimize handover failure

Unavailable time slots because of high traffic – Increase time slot

Congestion – Increase Capacity

Low signal strength and bad quality

Check handover margin

Hardware problem like TRX or time slot problem

III Call drop due to Missing neighbor

Ways to optimize handover problem

Check neighbor list from BSS engineer

Add missing neighbor cells

Remove unnecessary neighbor cells

IV Call drop due to Interference.

Ways to resolve interference issue, in other to reduce call drop in a network and

improve performance.

Resolve High RTWP –Receive total wideband power

Change antenna azimuth in the affected area.

Check Feeder connector

Check external interference if any

V Call drop due to Pilot Pollution (too many cells present)

Ways to resolve pilot pollution issue, in other to reduce call drop in a network and

improve performance

Change Antenna Azimuth in the affected area

Antenna down tilt

Lower pilot CPICH power

VI Check hardware Alarm, Radio failure and Node B failure

V. Signaling - Run a Trace in the affected area

3. Neighbor Optimization

I. Neighbor relation should be well defined to avoid call drop

3G to 3G – on 3G network RNC

3G to 2G – on 3G network RNC

2G to 3G – on 2G network BSC

II. Check neighbor list from BSS engineer

III. Add missing neighbor cells IV Remove unnecessary neighbor cells.

3b Handover Optimization -

Check Handover margin

4. Quality -Interference & Pilot Pollution Optimization

1. Identification and Optimization of pilot pollution

Below are the process or condition for the identification of Pilot pollution in a network

More than 3 Active set in a cluster

All active set CPICH_RSCP > -95dbm

The difference between first & last active set < 5dbm

Pilot Scrambling code contribution more than 8% of pilot pollution in a cluster

Below are the process to resolve or optimize pilot pollution

Antenna Adjustment - Azimuth

Antenna down tilt - By adjusting tilts on the best servers, or worst interference, pilot pollution can be removed or reduced in a network

Lower pilot power

FICHIER UTILISE BECH TELCHQRGER BQTEL HQTEL

JEBNEK SQHB C FQUX

The most powerful

Create reports and get business insight fast

Qlik Sense Desktop is a free product that enables you to create interactive

reports and dashboards with stunning charts and graphs. The visualization

software simplifies data analysis and helps you make informed business

decisions faster than ever before. Discover more insights in your data in just

five minutes.

Drag-and-drop functionality for ease and speed

Smart Search feature helps you uncover data relationships

Explore multiple data sources easily in a single app

Collaborate and share insights with rich data storytelling

Register now and get access to your free Qlik Sense Desktop download

instantly, as well as information on how to get started.

Create reports and get business insight fast

Qlik Sense Desktop is a free product that enables you to create interactive

reports and dashboards with stunning charts and graphs. The visualization

software simplifies data analysis and helps you make informed business

decisions faster than ever before. Discover more insights in your data in just

five minutes.

Drag-and-drop functionality for ease and speed

Smart Search feature helps you uncover data relationships

Explore multiple data sources easily in a single app

Collaborate and share insights with rich data storytelling

Register now and get access to your free Qlik Sense Desktop download

instantly, as well as information on how to get started.

2G Optimization

Optimization covering the following topics:

1. Low signal strength analysis

2. TCH Assignment Analysis

3. Interference analysis

4. SD and TCH congestion analysis

5. SD drop due to other reasons

6. HOSR Analysis

Low Signal Strength Analysis

lets starts todays topic that is Low signal strength analysis. What could be the probable cause of low signal while you drive or optimize. First see the following flow chat and try to understand the things

Low Signal strength is one of the reason of drop call. It can be indicated by many calls disconnected at low signal strength by subscriber, drop calls due to excessive TA, poor handover performance and poor call setup performance. What could be the probable reasons Probable Reason Poor BSC

Exchange Property setting

High LOWSSDL & LOWSSUL will give more drop reason due to SS and this might not show the actual drop. It is because drop due to SS is more priority than Quality.

http://www.cellular-planningoptimization.com/2010/02/low-signal-strength-analysis.html

http://4.bp.blogspot.com/_6eWNrxMtTHk/S4K8MEsDYfI/AAAAAAAAAC0/7cN7kKqQRXo/s1600-h/low+coverage.JPG

No dominant cell

Cell might be isolated or standalone.

Antenna tilt & orientation

Too much downtilt sometimes might not cover a larger area and the subscriber might lose the SS.

Output Power Low output power might cause smaller border cell.

Just try to observed what could be the right cause :-

The following procedure should be performed for low signal strength

analysis:

1Identify the baseline requirement of design and BSC exchange property (setting for LOWSSUL/LOWSSDL).

2. Check the value for LOWSSDL & LOWSSUL. If it is higher than ACCMIN, change the parameter to a reasonable value since the drop reason will be more priority to SS compared to Quality.

3. Check the site position, antenna direction, position etc. This is to ensure the possible location is open to interference (open water environment) or isolated. Good map is needed for this.

4. Check if the site is sectorized or Omni. If it is Omni, set the cell into sectorized cell.

5. Check if the signal strength is uplink or downlink limited. Mostly, It is designed to be downlink limited.

6. Check the coverage cover expected area from the planet. If it is not, check the antenna tilt and orientation. Change the direction or tilt if it is too much downtilt or pointing to a wrong direction.

7. Sometime, low output power might cause low SS. Check output power and if it is low, increase the output power.

8. 8: 9. Check cell whether it has hotspots from drivetests. If found, adding

new site is recommend.

10. In order to check power distribution, run Cell Traffic Recording (CTR) to that particular cell.

11. 10: 12. Check if the cell has indoor coverage problem. If yes, add micro

site instead.

TCH Assignment Analysis

Successful assignments show the number of successful TCH allocations at call setup. At unsuccessful assignment, the Assignment Complete message, sent by the MS, was never received by the BTS.

The formula is defined as:

% TCH ASSIGNMENT SUCCESS RATE

= TFCASSALL X 100 %

TASSATT

Probable Reason

No dominant serving cell

The serving cell cannot cope with the TCH traffic.

Severe congestion on TCH

Failing TCH allocation for assignment or handover due to congestion

Low signal strength for call access

The signal strength might be higher on the BCCH than on the TCH.

Interference Disturbance on SDCCH or target TCH

Faulty transceiver Faulty equipment

The following procedure should be performed for TCH Assignment analysis:

1: For TCH assignment success rate, the first thing, check the TCH Time Congestion.

2: If there is congestion on TCH, it is recommend doing the dimensioning and adding TRU based on carried TCH traffic demand.

3: If there is no congestion on TCH, check the output power of the BTS. If the output power is low, increase the output power.

4: If the output power is ok, check the faulty BTS by extracting BTS error log.

5: If hardware fault found, swap or repair HW.

Perform drivetests to check the coverage and received RxLEV.

http://www.cellular-planningoptimization.com/2010/02/tch-assignment-analysis.html

6: If no dominant cell or similar signal strengths of a few cells found during drivetests, it is recommended to add BTS.

7: If there is no problem on the dominant cell, check the interference whether co-channel or adjacent channel.

8: Check the disturbance whet

2G Optimization

Optimization covering the following topics:

7. Low signal strength analysis

8. TCH Assignment Analysis

9. Interference analysis

10. SD and TCH congestion analysis

11. SD drop due to other reasons

12. HOSR Analysis

Low Signal Strength Analysis

lets starts todays topic that is Low signal strength analysis. What could be the probable cause of low signal while you drive or optimize. First see the following flow chat and try to understand the things

http://www.cellular-planningoptimization.com/2010/02/low-signal-strength-analysis.html

http://4.bp.blogspot.com/_6eWNrxMtTHk/S4K8MEsDYfI/AAAAAAAAAC0/7cN7kKqQRXo/s1600-h/low+coverage.JPG

Low Signal strength is one of the reason of drop call. It can be indicated by many calls disconnected at low signal strength by subscriber, drop calls due to excessive TA, poor handover performance and poor call setup performance. What could be the probable reasons Probable Reason Poor BSC

Exchange Property setting

High LOWSSDL & LOWSSUL will give more drop reason due to SS and this might not show the actual drop. It is because drop due to SS is more priority than Quality.

No dominant cell

Cell might be isolated or standalone.

Antenna tilt & orientation

Too much downtilt sometimes might not cover a larger area and the subscriber might lose the SS.

Output Power Low output power might cause smaller border cell.

Just try to observed what could be the right cause :-

The following procedure should be performed for low signal strength

analysis:

1Identify the baseline requirement of design and BSC exchange property (setting for LOWSSUL/LOWSSDL).

2. Check the value for LOWSSDL & LOWSSUL. If it is higher than ACCMIN, change the parameter to a reasonable value since the drop reason will be more priority to SS compared to Quality.

3. Check the site position, antenna direction, position etc. This is to ensure the possible location is open to interference (open water environment) or isolated. Good map is needed for this.

4. Check if the site is sectorized or Omni. If it is Omni, set the cell into sectorized cell.

5. Check if the signal strength is uplink or downlink limited. Mostly, It is designed to be downlink limited.

6. Check the coverage cover expected area from the planet. If it is not, check the antenna tilt and orientation. Change the direction or tilt if it is too much downtilt or pointing to a wrong direction.

7. Sometime, low output power might cause low SS. Check output power and if it is low, increase the output power.

8. 8: 9. Check cell whether it has hotspots from drivetests. If found, adding

new site is recommend.

10. In order to check power distribution, run Cell Traffic Recording (CTR) to that particular cell.

11. 10: 12. Check if the cell has indoor coverage problem. If yes, add micro

site instead.

TCH Assignment Analysis

Successful assignments show the number of successful TCH allocations at call setup. At unsuccessful assignment, the Assignment Complete message, sent by the MS, was never received by the BTS.

The formula is defined as:

% TCH ASSIGNMENT SUCCESS RATE

= TFCASSALL X 100 %

TASSATT

Probable Reason

No dominant serving cell

The serving cell cannot cope with the TCH traffic.

Severe congestion on TCH

Failing TCH allocation for assignment or handover due to congestion

Low signal strength for call access

The signal strength might be higher on the BCCH than on the TCH.

Interference Disturbance on SDCCH or target TCH

Faulty transceiver Faulty equipment

The following procedure should be performed for TCH Assignment analysis:

1: For TCH assignment success rate, the first thing, check the TCH Time Congestion.

http://www.cellular-planningoptimization.com/2010/02/tch-assignment-analysis.html

2: If there is congestion on TCH, it is recommend doing the dimensioning and adding TRU based on carried TCH traffic demand.

3: If there is no congestion on TCH, check the output power of the BTS. If the output power is low, increase the output power.

4: If the output power is ok, check the faulty BTS by extracting BTS error log.

5: If hardware fault found, swap or repair HW.

Perform drivetests to check the coverage and received RxLEV.

6: If no dominant cell or similar signal strengths of a few cells found during drivetests, it is recommended to add BTS.

7: If there is no problem on the dominant cell, check the interference whether co-channel or adjacent channel.

8: Check the disturbance whet

file

recovery ability for recovering data from damaged or formatted hard drive or the hard drive is

inaccessible for unknown reason. In other words, as long as the partition exists, you can use this

data recovery module to recover data from the partition or external storage devices like memory

stick, memory card and flash drive, of whatever happened to cause the data loss.

Kgjergkerg

DG

ADJOINT MARKET

New Starters Guide

2G and 3G MML Commands

2G MML Commands

Information

BSC Base Station Controller

BTS Base Transceiver Station

TRX Transceiver Link Connection between two network elements

A-Interface Interface between BSC – MSC

Abis-Interface Interface between TRX - BSC

Air-Interface interface between Mobile Station and TRX

2G BSS MML commands

ZEOL:nn; Current alarms for particular site.

ZEOH:2001-03-01,10-00-00:BCF=nn; Shows alarms from 10.00 Hrs on 1/3/2001

to present day.

ZEEI:BCF=nn; Shows state of particular site.

ZEFR:nn Confirm “ Y “ Complete site reset, if any calls are

current then calls will be dropped.

ZEFS:nn:L; Locks site U; Unlocks Locks/Unlocks site if any calls

are current then calls will be

dropped.

ZEQS:BTS=nn :L; U; Locks/Unlocks sector if any calls are

current then calls will be dropped.

ZEQS:BTS=nn :L:FHO,30;Locks sector after 30 seconds, after forcing the calls to handover to another site.

ZERS:BTS=nn,TRX=nn:L; Locks a TRX U; Unlocks

Locks/Unlocks an individual TRX on a sector

(not if Hopping = ON)

ZEFR:nn:OMU; Resets site OMU.

ZERO:BTS=nn; Shows T/S usage & I levels for each TRX for

the Sector

ZYMO:ET,nn; Gives ET stats for site. (BER)

Locking down a site for a Planned work

ZEQS:BTS=nn :L:FHO,30; Lock all sectors One at a time.

ZEFS:nn:L; Locks site

ZEQS:BTS=nn :U; Unlock all sectors One at a time

(This saves time at the end of the

Planned Work, when Field Op wants site

restored to service)

ZEFS:nn:U; Unlocks site

BSC MML Commands

ZAHO; List all current alarms on Particular

BSC

ZAHP: : :2001-03-01,10-00-00; Shows alarms from 10.00 Hrs on

1/3/2001 to present day

ZEEL:BL; Shows all Blocked Sites / Sectors /

RX / Time Slots

ZDSB: : :PCM=nn; List all connections to a PCM (ET)

ZNEL; Shows all Signalling links to MSC

Please check commands before use.

NO responsibility will be accepted for errors in this document.

COMMON COMMANDS

ZACC: Enter alarm No. in brackets.

(Cancels alarm off MSC/BSC)…

ZEOR on BTS.

ZAHO: Gives alarms present on MSC/BSC.

ZAHP: Gives alarm history for MSC/BSC.

ZCEC:CRCT=345-1&&-3:BA; (=BARRED) then SE; (=SEPARATED) then NU;

(=NOT USED) then SE; (AGAIN!) then WO; (= WORKING)

Use this command to toggle in fault y

timeslots

ZCEL: CGR= 1024 : Gives state of all channels as a

whole.

ZCEL: CGR=1024,FORM=EXT,ST=BA-ALL; Shows all channels within Circuit group that are barred.

CGR=1024,FORM=EXT,ST=SE-SY; Shows all channels within Circuit

Group that are in the state Seperated

by System

ZCRI:SEA=(select your search criteria):CRCT= xxxxx:

Gives state of all channels

individually within Circuit Group.

ZCRI; Lists all circuit groups on the switch.

ZCRM: Modify State of Circuit group.

ZDDA; To adjust time…….check again at

OMC : ZDCC;

ZDRI: Outputs Sync. Info.(esp.on BSC)

ZDTI: Checks LAPD (DPNSS) link. (eg.

ZDTI: NAM=T1084;)

ZDTC: Change state of LAPD (DPNSS) link.

ZEDO: To find out BSC info and BTS’s that

are connected to the BSC.

ZEEL: BL; Outputs all blocked

TRXs/CHANNELS on a BSC.

ZEEI: Then e.g. BCF=52, gives LAC

(Location Area Code), Cell ID.

Admin state,

ZEEI; Without qualifier prints out all BCF

info. Including PCM Nos.

ZEFR: Resets BCF and downloads software

from BSC. (With parameter OMU,

resets omu)

ZEFS: To lock/unlock BCF (Change state)

e.g. ZEFS : 42 : U ;

ZYEC: ET , xx : NORM , CRC4 ; …Resets counters on ET xx (can help sort out sync. problems)

ZELO: Gives all BTSs on a BSC.

ZEOH: Input BCF No. And date/time (Gives

alarm history for a site from the

specified date and Time).

ZEOL: (BCF No.) Gives all alarms present

on a site.

ZEOR: Cancels alarm from BTS.

ZEPO: Gives the BSC under which an

entered BTS lies (routing zone also

given).

ZEQO: Cell info. (i.e. If barred etc.).

ZEQS:BTS=XX:L:FHO,20; Forces handover of all calls after 20

seconds.

ZEFS:xx:L; Blocks down site.

ZEFS: xx:U; Unblocks site.

Quicker way of locking/unlocking Site/BCF….

Instead of going for MML session with BCF go to “RADIO NETWORK MANAGEMENT” then to “RNW

PARAMETERS”

ZERO: BTS=19,TRX=3; Gives state of the specified TRX.

ZERS: BTS=xx,TRX=xx,:L: ; Lock TRX.

ZERS: BTS=xx,TRX=xx,:U: ; Unlocks TRX.

ZERS: BTS=xx,TRX=xx,CH=xx:L: ; Locks channel.

ZERS: BTS=xx,TRX=xx,CH=xx:U: ; Unlocks channel

ZEAO:BTS=xx; Shows adjacent cell info. Using the

BTS’s adjacent CI. Check the LAC

and CI of all adjacent cells given

(Also on other BSCs)

ZEVV: Downloads s/w database into buffer

of BTS. (Used if no d/b already in

Flash Memory…then Reset site twice

to place in RAM)

TCSM COMMANDS

ZDDT: Accesses TCSM (From BSC end of

link) e.g. ZDDT:TCSM,16;

USERNAME = EXPERT

PASSWORD = SYSTEM

A = Alarm handling command menu

L = Synchronization command menu

E = ET Supervision command menu

Examples:

AI = Alarms currently active.

AC = Wired alarms from other

TCSM2 units.

LS = Displays Sync. Inputs

LP = Changes Priority

LF = Changes Sync. Input.

LO = Sets operating mode

(Hierarchical or Plesiochronous)

Z = Return to main menu

X = Exit

NSS MML Info / Commands

Circuit Groups

There are 2 ways of identifying a Circuit Group

CGR Circuit Group

NCGR Name of Circuit Group

Examples:

NCGR CGR Route

MxxPyyB1 10yy BT Route

MxxXyyB1 12yy Orange Link/ OWE Route

MxxRyyB1 14yy WAP RAS Route

MxxWyy 15yy Wildfire Route

MxxZyyB1 16yy Cable & Wireless Route

MxxMyyB9 18yy Data Route

MxxVyyB1 19yy VPS Route

3** Route to a BSC

1** Internal Circuit Group

2** Internal Circuit Group

MxxMyyB18yy Inter MSC route – the last 2 digits refer to the destination MSC

ZMIO: On HLR to find out which VLR IMSI

is on.

ZMJL: On HLR to output list of VLR

Addresses.

ZMVO: ON HLR toVLR Detach.

ZNBI: Gives all number ranges.

ZNEL: Lists all signalling links and their

states.

ZNGI:NA0,H’(Signalling Point Code No. in Hex)….

Gives more info. on destination etc.

ZNHI: NA0,H’(Signalling Point Code No. in Hex)….

Gives even more information.

ZNLI: Interrogates Signalling Link States.

Bxxx = BSC Link, Vxxx = VPS Link

Txxx = TSC Link, Pxxx = PSTN Link

Hxxx = HLR Link etc. )

ZMBO: On HLR finds IMSI from MSISDN.

ZMSO: MSISDN=xxxxxxxxxxx; On HLR outputs supplementary info for MSISDN. IMSI=xxxxxxxxxxxxxxx; On HLR outputs supplementary info for IMSI.

ZQNS: Outputs MML type sessions open to

an Element and last command input.

ZQNI: On OMC checks all OMC links.

ZUSI: Gives state of Unit(s) which is/are

requested in parameter info.

ZUSU/C: Restarts/Changes state of Unit.

ZWIP: CGR; Outputs CGR data.

ZYMO:ET,xx; Outputs PCM stats. on an ET. (eg.

ZYMO:ET,16:SLI; outputs slips on

ET 16)

ZIGO: Outputs MML information for a site/switch.

ZIAB: Allows a certain command to be

used , e.g. ZIAB:MXM:EXEC=N;

3G MML Commands

Check all live alarms on

RNC- ZAAP:;

Check all alarms back to midnight

ZAHP:;

Check all alarms on a given WBTS

ZAAP:WBTS,XXX; or ZAAO:WBTS,XXX

Output alarms for a given unit….

ZAAP: (return) and select one of following…

ZAAP:

/* IDENTIFY UNIT TYPE:

OMU MXU NIS1P NIP1

NIS1 RSMU RRMU ICSU

GTPU SFU TBU A2SU

DMCU FDU WDU VDS

VTP VPP LPD SCSI

NEMU WBTS NONE

DEFAULT IS ALL */

Output all NIP1s and PETs on RNC…(shows which NIP1 PET is on)

ZUSI:NIP1,::FULL;

Alarm check on a given PET After checking which NIP1 PET is on)

ZAAP:NIP1,X,PET,YY; where X =NIP1 number, YY=PET number

Output all NIS1s and SETs on RNCs

ZUSI:NIS1,::FULL;

Alarm check on a given SET After checking which NIS1 SET is on)

ZAAP:NIS1,X,SET,YY; where X =NIS1, YY=SET number

Shows the relationship between the Interface ID and a PET/SET

ZYDI:XX; XX=Interface ID number. (Interface ID obtained from COCO)

Route handling commands

Show the ANI number for a route. ANI=WBTS&COCO number ZRRI:ROU=XX;

Shows interface ID, VPI, VC and path number for given route.

ZLJI:ROU=XX;

Output signalling link states

ZNEL;

Check link stats

ZOLP:X,ATM,A,C:D:; X=link number

Output log events for sig link

ZOLL:X,ATM:; X=link number

Output all DMCUs/DMPGs/DSPs

ZUSI:DMCU,::FULL;

Check created packages in SOMAFI….

ZWQO:CR;

Put unit into diagnostics

ZUDU:XXX; where XXX = unit.

Output diagnostic report for unit

ZUDH:XXX; where XXX=unit

Output all DMCUs/DMPGs/DSPs

ZUSI:DMCU,::FULL;

Check created packages in SOMAFI….

ZWQO:CR;

Pour pdf Put unit into diagnostics

ZUDU:XXX; where XXX = unit.

Output diagnostic report for unit

ZUDH:XXX; where XXX=unit

Change unit state

ZUSC:XXX; where XXX= unit

Restart unit (with total code load from disk)

ZUSU:XXX,Y::C=TOT; where XXX=unit Y=unit number

Gkjregjertgklert

Ni trlrvom

gergt

ertet

Doté de nouvelles technologies uniques de récupération de données, R-Studio est la

solution de récupération de données la plus complète pour opérer sur NTFS, NTFS5, ReFS,

FAT12/16/32, exFAT, HFS/HFS+ (Macintosh), variantes petits et gros boutiens de UFS1/UFS2






des données.

En plus d'être un outil complet de récupération de données, R-Studio inclut également: Un module de reconstruction RAID avancé. Un éditeur de texte et hexadécimal complet

http://7datarecovery.com/

Un module complet de copie et d'image de disque réuni en un seul logiciel, qui fait de R-Studio la solution idéale pour créer une station de travail de récupération de données.



différent;







Systèmes de fichiers pris en charge: FAT12, FAT16, FAT32, exFAT, NTFS, NTFS5, ReFS (un nouveau système de fichier basé sur Windows 2012 Server), HFS/HFS+ (Macintosh), les variantes Little et Big Endian de UFS1/UFS2 (FreeBSD/OpenBSD/NetBSD/Solaris) et Ext2/Ext3/Ext4 FS (Linux).























Outil


FS UFS/HFS/HFS+

Prix,

USD Obtenir CLUF


179.99

R-STUDIO

79.99


124.99

R-Studio NTFS

49.99


124.99

R-Studio FAT

49.99


899.00

R-Studio Demo

R-Studio Agent

R-Studio Emergency














Licence de volume


service


Produits

R-Studio

R-Studio pour Mac

R-Studio pour Linux

R-Undelete

R-Drive Image

R-Crypto

R-Mail

R-Word

R-Excel

R-Wipe & Clean

R-Linux

R-Updater

Compatibilité


Centre d'assistance


Forum R-TT

Assistance clients


FAQ Ventes

Obtenir une facture

Requête d'achat



Distribution


Revendeurs


Login











































Menu

PRODUCTS

STORE

SUPPORT

ABOUT US

CONTACT US

Sélectionner une langue▼

All-in-one Data Recovery Software Rescuing

Your File Under Almost Any Condition

Complete and capable data recovery software for rescuing files under almost any conditions

including: accidentally deleted files; damaged or formatted hard drive; lost/deleted partition;

photo or video lost from local drive, memory card, or camera; file lost from mobile phones, etc.

>Recover data from both local drives and mobile storage devices

>Recover documents, emails, photos, videos, audio files and more

>Recover 1 GB data for free with the Free Edition

>> FREE DOWNLOADUSER'S REVIEW

Accidentally Deleted Files Recovery

Designed for the recovery of accidently deleted data and files. Using advanced scanning

technology and directory restructuring algorithm, 7-Data Recovery Suite can assist you to recover

deleted data and files emptied from Recycle Bin and files deleted by using SHIFT+DELETE key, etc.

Free Download

Complete Recovery from Local & External Drive

The most powerful file recovery ability for recovering data from damaged or formatted hard drive

or the hard drive is inaccessible for unknown reason. In other words, as long as the partition

exists, you can use this data recovery module to recover data from the partition or external

storage devices like memory stick, memory card and flash drive, of whatever happened to cause

the data loss.

Free Download

http://7datarecovery.com/product/

http://7datarecovery.com/store/

http://7datarecovery.com/support/

http://7datarecovery.com/about/

http://7datarecovery.com/contact/

http://7datarecovery.com/file/7data-recovery-suite.exe




http://7datarecovery.com/file/screenshot.png

Recover Data from Lost and Deleted Partitions

Recover data from lost or deleted partitions. This is the most common data lost reason. And also,

this data recovery module could help you to recover your data when hard drive crashed, MBR

corrupted, disk repartitioned (fdisk) and partition be overwritten when you use data backup

software to restore the disk image.

Free Download

Recovery Photo, Image, Video and Audio

7-Data Recovery Suite provides an exclusive media recovery option that allows you to recover lost

image, audio, and video files from hard drives, USB drives, SD cards, Camera, and other memory

cards. It runs a full hard drive scan to safely recover images and media files in any event of

accidental photo deletion, virus infection, or disk formatting.

Free Download

Mobile Phone Recovery on Windows

Mobile phones process and store huge amount of data on daily basis. However, many times the

memory card of the mobile phone gets corrupt, inaccessible leading to vital data loss. 7-Data

Recovery Suite can recover deleted data/photos/videos from the inaccessible or formatted

memory card of your mobile phones.

Free Download

Memory Card Recovery

For memory card used by digital camera or mobile phone, 7-Data Recovery Suite can effectively

recover lost, deleted, corrupted or formatted photos and video files from various memory cards

types including SD Card, MicroSD, SDHC, CF (Compact Flash) Card, xD Picture Card, Memory Stick

and more.

Free Download

Step by Step Data Recovery Process Design

Install

Scan





http://7datarecovery.com/file/screenshot.png

http://7datarecovery.com/wp-content/uploads/2013/07/scan-recoverable-files.png

Recover

Recommended by Both Pro and Ordinary Users

“I work in the IT industry and this powerful piece of software is unlike anything I’ve ever seen."

-George Papas, New Jersey, USA

"I am very impressed with the software for ease of use and clarity of guidance, It certainly saved

the day and I am delighted.” -Ann Lawrence, Scunthorpe, UK

"I cannot thank you enough and would highly recommend you to anyone who loses important

stuff from their computer." -Raymond Cowie, Loughborough, UK

"I cannot afford not to have it on my computer. It's like having fire, theft and flood insurance on

your home, but on your hard drive." -Jay Douglass, Seattle, USA

"You have saved me a lot of money and returned some irreplaceable data to me, and I am

extremely grateful." -Stephanie Fairey, Adelaide, Australia

"I am a happy camper with a big sound of RELIEF.7 data recovery saved me from a huge bill and

from a sleepless night! Awesome.” -Jasmine Reeves, Belleville, IL, USA

Supports Hundreds of File Formats and

Advanced Search Parameters

Supported Storage

Devices

DE HDD, SATA HDD, SCSI HDD, FireWire HDD, SSD, USB

HDD, External HDD, Hardware RAID, Floppy drive, USB flash

drive, Compact flash card, Secure Digital card, Memory

card/Memory stick, Micro card, Zip drive, IPod, Other storage

devices

Supported File Systems EXFAT, NTFS5, NTFS, FAT32, FAT16, FAT12

Supported Graphics

File Formats

3d Studio Max file(.max), ANI file(.ani), Adobe Illustrator

file(.ai), Bitmap file(.bmp), COREL Draw file(.cdr), Corel Draw

Corel RAVE Image file(.clk), Corel Draw Vector Image

http://7datarecovery.com/wp-content/uploads/2013/04/data-recovery-file-preview.png

file(.cmx), Canon Raw graphics file(.crw), Cursor file(.cur),

AutoCAD Drawing file(.dwg), AutoCad DX File(.dxf),

Enhanced Metafile(.emf), Encapsulated Postscript file(.eps),

Freehand 10 file(.fh11), GIF graphics file(.gif), Icon file(.ico),

JPEG Graphics file(.jpg.jpeg), Portable Network Graphic

file(.png), Adobe Photoshop file(.psd), Paint Shop Pro file(.psp),

Q uattroPro 7 File(.qpw), Corel Presentation File(.shw), Tagged

Image File(.tif)

Supported Document

File Formats

Microsoft Word Document(.doc), Help file(.hlp), HTML

Documents file(.htm/.html), MOF file(.mof), Microsoft Project

file(.mpp), Microsoft OneNote file(.one), Adobe Portable

Document(.pdf), Microsoft PowerPoint Presentation file(.ppt),

Microsoft Publisher Document(.pub), Rich Text Document(.rtf),

True Type Font file(.ttf), Microsoft Visio Drawing(.vsd),

WordPerfect file(.wpd), WordPerfect Documents and Graphics

v8(.wpg), Microsoft Excel XML Documents(.xls), 3DS file

(.3ds)

Supported Archives File

Formats

Cabinet file(.cab), CHM file(.chm), CSL file(.csl), GZIP

compression file(.gz), LZH compression file(.lzh), RAR

compression file(.rar), TAR archive file(.tar), Zip compression

file(.zip),

Supported Multimedia

File Formats

3GP Multimedia file(.3gp), Audio Streaming Format file(.asf),

AU file(.au), Audio Video Interleave file(.avi), Musical

Instrument Digital Interface file(.mid), MOV Multimedia

file(.mov), MP3 Music file(.mp3), MP4 Multimedia file(.mp4),

ShockWave Flash file(.swf), WAVE Multimedia file(.wav),

WMF Multimedia file(.wmf)

Supported Email File

Formats Outlook Express Email file(.dbx), Outlook Email file(.pst)

Supported Database

and Financial File

Formats Access Project file(.adp), Access Database file(.mdb)

Supported File Search

Parameter

File Name, File Extension, File Mask, File Location, File Type,

Date Modified, Date Created, Date Accessed, File Size, Case

Sensitive

Supported Memory

Card Manufacturers

SanDisk, Kingston, KingMax, Sony, Lexar, PNY, PQI, Toshiba,

Panasonic, FujiFilm, Samsung, Canon, Qmemory, Transcend,

Apacer, PRETEC, HITACHI, Olympus, SimpleTech, Viking,

OCZ Flash Media, ATP, Delkin Devices, A-Data, and almost all

digital camera memory card brands in the market

Supported Operating

Systems Windows 8, Windows 7, Windows Vista, Windows XP,

Windows Server 2008, Windows Server 2003

FREE Data Recovery Software Capable of

Recovering Your Files From Almost Any Storage

Devices

>> FREE DOWNLOAD

↑© 2016 7-Data Recovery Software [email protected]

Restoration Version 2.5.14 Author: Brian Kato

Restoration.zip

This file has been scaned for Virus with NAV2004, and is Spyware free Jan 22,

2004

Description

Restore files which are deleted from the recycle bin or deleted while holding down

the Shift key by mistake.

Conversely, this program has another function that makes it almost impossible to

restore all deleted files.

You can use it after deletion of confidential documents, embarrassing files and so

on.

You don't have to install it, so it doesn't leave any garbage in the PC.

(You can also run it from a floppy disk.)

Even if a file seems to be restored, there is no guarantee that the contents are

correct.

After you run the program, please check the files.

You can probably restore it correctly if the drive has enough free space and if it's

just after deletion.

If you restore a folder, there is no guarantee that all files or


http://7datarecovery.com/

mailto:[email protected]

http://www3.telus.net/mikebike/Restoration.zip

folders which used to belong to the folder will be in it.

If you can't find them in it, please search and restore them one by one.

If you still can't find them, it's impossible to restore them.

It will be almost impossible to restore any deleted files if you run the complete

deletion function.

To be exact, fragments of deleted files can be in last clusters of existing files or

allocated and unwritten files.

(Note that this function is not suitable for TOP SECRET information.)

Even if you find the information of completely deleted files, their contents must

be erased.

If you want to erase the information too, please run the function again.

When you use the restoration function, I don't think you will encounter any

damage due to bugs, since the function doesn't write anything to physical sectors.

However, the complete deletion function replaces physical sectors.

Therefore, I confirmed that it worked without any problems by testing many

times.

As there is a rare possibility of damage or loss, please run the function at your own

risk.

[Update History]

Version 1.7.3

Added Windows NT/2000 support.

Added vacant clusters scan and all clusters scan function.

Version 1.8.12

Fixed two bugs concerned with reading specific extended dos partition

or hidden partition.

Version 2.2.12

Added folder restoration function.

Added NTFS partition support.

Fixed a bug concerned with reading specific removable disk.

Version 2.5.6

Added comlete deletion function.

Added support of disks with non 512 bytes sector size such as FAT32

DVD-RAM.

Fixed a bug concerned with non-residet attribute list attribute of

NTFS.

Fixed a bug concerned with reading specific FAT32 partition.

Version 2.5.14

Fixed a bug concerned with folder restoration of FAT partition.

(The error occurd from Version 2.5.6.)

Escape Clause

I'm not responsible for any damage or loss caused by the use of this software in

any case.

In addition, even if this software is defective, I'm not under obligation to correct or

support it.

[Supported Platform]

IBM-PC/AT Compatible PC

Supported Devices

Hard disk

Floppy disk

ZIP drive (I tested by parallel port ZIP drive. I don't know the reason but if the OS is

Windows 95/98/Me, it doesn't recognize the disk unless the disk is inside the drive

when the PC boots up.

However, you can change the disk after boot.)

PD (A user reported that it worked correctly.)

DVD-RAM (A user reported that it worked correctly.)

Smart media (A user reported that it worked correctly.)

Memory stick drive (A user reported that it worked correctly.)

No other devices are tested.

Supported OS

Windows 95/98/Me/NT/2000/XP

Supported File System

FAT12/FAT16/FAT32/NTFS

Compressed files of NTFS are supported.

However, encrypted files of NTFS are not supported so far.

How to Run

Double click "Restoration.exe" file, which is extracted form the self-extracting file

or the zip file.

If the OS is Windows 95/98/Me, both the "DLL32.dll" file and the "DLL16.dll" file

have to be in the same folder as the "Restoration.exe" file.

(These two files are not required for Windows NT/2000/xp.)

(If "Do not show hidden or System files" option is selected in "Folder Options" of

"Explorer", these two files are invisible.)

If you create the shortcut and run the program from it, you have to specify the

path of the same folder as these two files

(e.g. "C:\REST2514") for "Start in" by right clicking on the shortcut icon and

opening properties.

I think it can run on most PCs because a static library is used.

However, if you get an error message when you start it, please install a specific MS

product such as "Internet Explorer" or try to obtain and install the required DLL

files.

Instructions

1. Select a drive.

If the first byte of the file is unknown, character "$" is used as a

substitute. (FAT partition)

If you specify all or part of the file name, all first byte unknown

files which are possibly contain the text are displayed.

You can't use wild card "*". Therefore, if you want to search by

extension, please enter something like ". TXT".

If you check "Include used clusters by other files" box and search,

you can find more files, but the file has little possibility of being

restored correctly if the pointed cluster is used by another file.

(FAT partition)

If you check the "Include even if the file size is zero" box, you can

find more files, but it's almost pointless to restore them because

it's exactly the same as creating a new empty file of the same name

manually.

After finishing the regular search, a message will appear asking you

if you want to scan vacant clusters, if you couldn't find your target

file, please select yes. (FAT partition)

All possible items (the ones that pass the specific condition) will

be listed. (FAT partition)

After showing the items, when you click on the heading for a column,

that values in that column instantly sort in ascending sequence.

If you click the heading a second time, the values are sorted in

descending sequence.

Subsequent clicks would continue to alternate the sort sequence

between ascending and descending.

2. Select a listed file.

3. Click "Restore by copying" button.

4. Specify the location you want to restore to.

I recommend you if possible to select a different drive from the

searched drive so not to overwrite original data.

If the file is a compressed file of NTFS, it will be decompressed and

restored.

All clusters scan (FAT partition)

Scan all clusters unconditionally and list all candidates

(the ones that pass the specific condition).

1. Click "Others" and then "Scan All Clusters" from the menu bar.

2. Answer the dialog boxes.

Complete deletion

Erase all vacant clusters by overwriting with random numbers and then with zeros.

After that, erase all deleted file information(FAT partition)/file

records(NTFS partition) by using random numbers and zeros.

1. Click "Others" and then "Delete Completely" from the menu bar.


[Copyright]

This is freeware, but the copyright is reserved.

You may distribute this program freely only in the original archive

(i.e. it must include this readme document without modification).

You may not make profit by selling this program.

[Technical Support]

I'll try to support if time allows.

However, in most cases it's almost impossible to solve the problem without seeing

the PC itself.

My English is not perfect, so please use easy expressions if you send me an e-mail.

In addition, if you are a native English speaker and find any wrong expressions in

the program

or this readme document, please correct it and let me know.

Author: Brian Kato e-mail: [email protected]

Mike ~ It is a good day if I learned something new.

Editor MikesWhatsNews


Restoration.zip


2004

Description


http://www3.telus.net/mikebike







on.




correct.









deletion function.





be erased.






times.


risk.

[Update History]

Version 1.7.3



Version 1.8.12



Version 2.2.12




Version 2.5.6



DVD-RAM.


NTFS.


Version 2.5.14



Escape Clause


any case.


support it.



Supported Devices

Hard disk

Floppy disk










Supported OS






How to Run Double click "Restoration.exe" file, which is extracted form the self-extracting file

or the zip file.






If you create the shortcut and run the program from it, you have to specify the path

of the same folder as these two files


opening properties.




files.

Instructions 1. Select a drive.










(FAT partition) Doté de nouvelles technologies uniques de récupération de données, R-Studio est la solution de








des données.





différent;



























Outil


FS UFS/HFS/HFS+

Prix,

USD Obtenir CLUF


179.99

R-STUDIO

79.99








124.99

R-Studio NTFS

49.99


124.99

R-Studio FAT

49.99


899.00

R-Studio Demo

R-Studio Agent

R-Studio Emergency

Licence de volume


service


Produits

R-Studio

R-Studio pour Mac

R-Studio pour Linux

R-Undelete

R-Drive Image

R-Crypto

R-Mail

R-Word

R-Excel

R-Wipe & Clean

R-Linux

R-Updater

Compatibilité


Centre d'assistance


Forum R-TT

Assistance clients


FAQ Ventes










































Obtenir une facture

Requête d'achat



Distribution


Revendeurs


Login







manually.


















restored.














Complete deletion






[Copyright]





[Technical Support]



the PC itself.



the program






Restoration.zip


2004

Description






on.




correct.









deletion function.





be erased.









times.


risk.

[Update History]

Version 1.7.3



Version 1.8.12



Version 2.2.12




Version 2.5.6



DVD-RAM.


NTFS.


Version 2.5.14



Escape Clause


any case.


support it.



Supported Devices

Hard disk

Floppy disk










Supported OS






How to Run


or the zip file.









opening properties.




files.

Instructions

1. Select a drive.










(FAT partition)




manually.


















restored.






Complete deletion






[Copyright]





[Technical Support]



the PC itself.



the program






Restoration.zip


2004

Description






on.




correct.












deletion function.





be erased.






times.


risk.

[Update History]

Version 1.7.3



Version 1.8.12



Version 2.2.12




Version 2.5.6



DVD-RAM.


NTFS.


Version 2.5.14



Escape Clause


any case.


support it.



Supported Devices

Hard disk

Floppy disk










Supported OS






How to Run


or the zip file.









opening properties.




files.

Instructions

1. Select a drive.










(FAT partition)




manually.


















restored.






Complete deletion






[Copyright]





[Technical Support]



the PC itself.



the program






Restoration.zip


2004




Description Restore files which are deleted from the recycle bin or deleted while holding down





on.




correct.









deletion function.




Even if you find the information of completely deleted files, their contents must be

erased. Doté de nouvelles technologies uniques de récupération de données, R-Studio est la solution de








des données.

En plus d'être un outil complet de récupération de données, R-Studio inclut également: Un module de reconstruction RAID avancé.

Un éditeur de texte et hexadécimal complet Un module complet de copie et d'image de disque réuni en un seul logiciel, qui fait de R-Studio


Les outils R-Studio récupèrent des fichiers: Suppression hors de la Corbeille, ou lorsque la Corbeille a été vidée; Supprimé par une attaque de virus ou une coupure de courant; Après que la partition avec les fichiers a été reformatée, même pour un système de fichier

différent;




Interface standard de style Windows Explorer.

OS Hôte : Windows 2000, XP, 2003 Server, Vista, 2008 Server, Windows 7, Windows 8/8.1, Windows Server 2012.










Récupération des données si: o FDISK ou d'autres outils de gestion de disques ont été lancés; o Un VIRUS s'est introduit ; FAT est endommagé ; MBR est détruit. Reconnaît les noms localisés. Les fichiers récupérés peuvent être enregistrés sur n'importe quel disque (même réseau)














Outil


FS UFS/HFS/HFS+

Prix,

USD Obtenir CLUF


179.99

R-STUDIO

79.99


124.99

R-Studio NTFS

49.99


124.99

R-Studio FAT

49.99


899.00

R-Studio Demo

R-Studio Agent

R-Studio Emergency

Licence de volume


service


Produits

R-Studio

















R-Studio pour Mac

R-Studio pour Linux

R-Undelete

R-Drive Image

R-Crypto

R-Mail

R-Word

R-Excel

R-Wipe & Clean

R-Linux

R-Updater

Compatibilité


Centre d'assistance


Forum R-TT

Assistance clients


FAQ Ventes

Obtenir une facture

Requête d'achat



Distribution


Revendeurs


Login









times.


risk.





































[Update History]

Version 1.7.3



Version 1.8.12



Version 2.2.12




Version 2.5.6



DVD-RAM.


NTFS.


Version 2.5.14



Escape Clause


any case.


support it.



Supported Devices

Hard disk

Floppy disk










Supported OS






How to Run


or the zip file.









opening properties.




files.

Instructions

1. Select a drive.










(FAT partition)




manually.


















restored.






Complete deletion






[Copyright]





[Technical Support]



the PC itself.



the program






Restoration.zip


2004

Description






on.




correct.









deletion function.








be erased.






times.


risk.

[Update History]

Version 1.7.3



Version 1.8.12



Version 2.2.12




Version 2.5.6



DVD-RAM.


NTFS.


Version 2.5.14



Escape Clause


any case.


support it.



Supported Devices

Hard disk

Floppy disk










Supported OS






How to Run


or the zip file.









opening properties.




files.

Instructions

1. Select a drive.










(FAT partition)




manually.


















restored.






Complete deletion






[Copyright]





[Technical Support]



the PC itself.



the program






Restoration.zip


2004

Description






on.







correct.









deletion function.





be erased.






times.


risk.

[Update History]

Version 1.7.3



Version 1.8.12



Version 2.2.12




Version 2.5.6



DVD-RAM.


NTFS.


Version 2.5.14



Escape Clause


any case.


support it.



Supported Devices

Hard disk

Floppy disk










Supported OS






How to Run


or the zip file.









opening properties.




files.

Instructions

1. Select a drive.










(FAT partition)




manually.


















restored.






Complete deletion






[Copyright]





[Technical Support]



the PC itself.



the program






Restoration.zip


2004




Description






on.




correct.









deletion function.





be erased.






times.


risk.